Panasonic CJ-HDR104A, CJ-HDR108A Quick Start Manual

HD Analog Recorder

Quick Start Guide

Model No. CJ-HDR104A

CJ-HDR108A

Version 1.0.0

i

Table of Contents

1 Hardware Installation and Connection ................................................................. 1

1.1 Check Unpacked DVR ......................................................................................... 1

1.2 About the Panels and Cover ................................................................................ 1

1.3 HDD Installation ................................................................................................... 1

1.4 Front Panel .......................................................................................................... 2

1.5 Rear Panel ........................................................................................................... 3

2 Local Login .......................................................................................................... 4

2.1 Device Initialization .............................................................................................. 4

2.2 Schedule .............................................................................................................. 5

2.3 Playback .............................................................................................................. 6

3 Web ..................................................................................................................... 7

ii

Welcome

Thank you for purchasing our HD Analog Recorder (DVR)!
This quick start guide will help you become familiar with our DVR in a very short time.
Before installation and operation, please read the following safeguard and warning carefully!

iii

Important Safeguard and Warning

1. Electrical safety

All installation and operation here should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
Please use three-pin power socket (with GND).
An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a
protective earthing connection.
Use a power supply which meets the requirements for SELV (Safety Extra Low Voltage) and
complies with Limited Power Source according to IEC 60950-1. Refer to the device label for
detailed information.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.

2. Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.

3. Installation

Keep upwards. Handle with care.
Do not apply power to the DVR before completing installation.
Do not place objects on the DVR.

4. Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.

5. Environment

The DVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.

6. Accessories

Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

7. Lithium battery

Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.