Panasonic CF-VEB522 Operating Instructions Manual
Port Replicator
for CF-52 Series
Personal Computers
Model No. CF-VEB522
ENGLISH
DEUTSCH
FRANÇAIS
OPERATING INSTRUCTIONS
Precautions ............................................................ 6
Names and Functions of Parts ............................. 7
Connecting/Disconnecting ................................... 8
Switching the Display ......................................... 10
BEDIENUNGSANLEITUNG
Vorsichtsmaßnahmen ......................................... 12
Namen und Funktionen der Komponenten ....... 13
Anschließen/Entfernen ....................................... 14
Umschalten des Displays ................................... 16
INSTRUCTIONS D’UTILISATION
Précautions d’utilisation ..................................... 18
E
D
Nom et fonction des pièces ................................ 19
Connexion/Déconnexion..................................... 20
Permuter l’afficheur ............................................. 22
F
Interface Cable
Use of an interface cable longer than 3 m {9.84 feet} is not recommended.
11-E-1
Schnittstellenkabel
Verwendete Schnittstellenkabel sollten eine Länge von 3 Metern möglichst nicht überschreiten.
11-G-1
Cable d’interface
Nous vous déconseillons d’utiliser un câble d’interface d’une longueur supérieure à 3 m.
11-F-1
ENGLISH
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private
households)
This symbol on the products and/or accompanying documents means that
used electrical and electronic products should not be mixed with general
household waste.
Please dispose of this item only in designated national waste electronic
collection schemes, and not in the ordinary dust bin.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for
the correct method of disposal.
36-E-1
2
DEUTSCH
Benutzerinformationen zur Entsorgung von elektrischen und elektronischen Geräten
(private Haushalte)
Entsprechend der grundlegenden Firmengrundsätzen der Panasonic-Gruppe
wurde ihr Produkt aus hochwertigen Materialien und Komponenten entwickelt
und hergestellt, die recycelbar und wieder verwendbar sind.
Dieses Symbol auf Produkten und/oder begleitenden Dokumenten bedeutet,
dass elektrische und elektronische Produkte am Ende ihrer Lebensdauer
vom Hausmüll getrennt entsorgt werden müssen.
Bringen Sie bitte diese Produkte für die Behandlung, Rohstoffrückgewinnung
und Recycling zu den eingerichteten kommunalen Sammelstellen bzw.
Wertstoffsammelhöfen, die diese Geräte kostenlos entgegennehmen.
Die ordnungsgemäße Entsorgung dieses Produkts dient dem Umweltschutz und verhindert
mögliche schädliche Auswirkungen auf Mensch und Umwelt, die sich aus einer
unsachgemäßen Handhabung der Geräte am Ende Ihrer Lebensdauer ergeben könnten.
Genauere Informationen zur nächstgelegenen Sammelstelle bzw. Recyclinghof erhalten Sie
bei Ihrer Gemeindeverwaltung.
Für Geschäftskunden in der Europäischen Union
Bitte treten Sie mit Ihrem Händler oder Lieferanten in Kontakt, wenn Sie elektrische und
elektronische Geräte entsorgen möchten. Er hält weitere Informationen für sie bereit.
Informationen zur Entsorgung in Ländern außerhalb der Europäischen Union
Dieses Symbol ist nur in der Europäischen Union gültig.
Bitte treten Sie mit Ihrer Gemeindeverwaltung oder Ihrem Händler in Kontakt, wenn Sie dieses
Produkt entsorgen möchten, und fragen Sie nach einer Entsorgungsmöglichkeit.
36-G-1
FRANÇAIS
Informations relatives à l’évacuation des déchets, destinées aux utilisateurs d’appareils
électriques et électroniques (appareils ménagers domestiques)
Lorsque ce symbole figure sur les produits et/ou les documents qui les
accompagnent, cela signifie que les appareils électriques et électroniques ne
doivent pas être jetés avec les ordures ménagères.
Pour que ces produits subissent un traitement, une récupération et un recyclage
appropriés, envoyez-les dans les points de collecte désignés, où ils peuvent
être déposés gratuitement. Dans certains pays, il est possible de renvoyer les
produits au revendeur local en cas d’achat d’un produit équivalent.
En éliminant correctement ce produit, vous contribuerez à la conservation des ressources
vitales et à la prévention des éventuels effets négatifs sur l’environnement et la santé humaine
qui pourraient survenir dans le cas contraire.
Afin de connaître le point de collecte le plus proche, veuillez contacter vos autorités locales.
Des sanctions peuvent être appliquées en cas d’élimination incorrecte de ces déchets,
conformément à la législation nationale.
Utilisateurs professionnels de l’Union européenne
Pour en savoir plus sur l’élimination des appareils électriques et électroniques, contactez
votre revendeur ou fournisseur.
Informations sur l’évacuation des déchets dans les pays ne faisant pas partie de l’Union
européenne
Ce symbole n’est reconnu que dans l’Union européenne.
Pour supprimer ce produit, contactez les autorités locales ou votre revendeur afin de connaître
la procédure d’élimination à suivre.
36-F-1
3
For U.S.A.
Federal Communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a
computer or peripheral. Also, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This device is Class B verified to comply with Part 15 of FCC Rules when used with
Panasonic Notebook Computer.
Responsible Party: Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-527-8675)
4
6-M-1
ENGLISH
Thank you for purchasing the port replicator for the Panasonic CF-52 notebook computer series*1.
By connecting your peripheral devices to the port replicator, you can save
yourself the trouble of having to connect and disconnect several cables every
time you transport the computer.
*1This port replicator cannot be used for other models.
Parts Inclusion
Port Replicator ......................... 1 Operating Instructions ............ 1
Specifications
Item
Power Supply Input
Expansion Bus Connector
Physical Dimensions
(Width × Height × Depth)
Weight
Operating Environment
Temperature / Humidity
Refer to “Specifications” in the “Operating Instructions” accompanying the computer for information on the connectors and ports on the rear panel of the port replicator.
DC 15.6 V [Do not use other than the specified AC
adaptor (Model No. CF-AA5803A)].
100-pin
408 mm × 68 mm × 225 mm
{16.1" × 2.7" × 8.9"}
Approx. 1.5 kg {3.3 lb.}
5 to 35 °C {41 to 95 °F} / 30 to 80 % RH
(No condensation)
Description
E
5
Precautions
Do Not Place Containers of Liquid or Metal
Objects on Top of This Product
If water or other liquid spills, or if paper clips,
coins, or foreign matter get inside this product,
fire or electric shock may result.
• If foreign matter has found its way inside,
immediately unplug the AC plug and remove
the unit from this product. Then contact your
technical support office.
If a Malfunction Occurs, Immediately Unplug
the AC Plug and Remove the Unit From This
Product
• This product is damaged
• A foreign object is inside this product
• Smoke is emitted
E
• An unusual smell is emitted
• Unusually hot
Continuing to use this product while any of the
above conditions are present may result in fire
or electric shock.
• If a malfunction occurs, immediately unplug
the AC plug and remove the unit from this
product. Then, contact your technical support
office.
Use Only the Specified AC Adaptor With This
Product
Using an AC adaptor other than the one supplied
(attached to your product or supplied by
Panasonic) may result in a fire.
Do Not Touch This Product and Cable When
It Starts Thundering
Electric shock may result.
Do Not Place This Product on Unstable
Surfaces
If balance is lost, this product may fall over or
drop, resulting in an injury.
Do Not Connect a Telephone Line, or a Network
Cable Other Than the One Specified, Into the
LAN Port
If the LAN port is connected to a network such
as the ones listed below, a fire or electric shock
may result.
• Networks other than 1000BASE-T, 100BASETX or 10BASE-T
• Phone lines (IP phone (Internet Protocol
Telephone), Telephone lines, internal phone
lines (on-premise switches), digital public
phones, etc.)
Do Not Keep This Product Wherever There
is a Lot of Water, Moisture, Steam, Dust, Oily
Vapors, etc.
Otherwise, possibly resulting in fire or electric
shock.
Do Not Leave This Product in High
Temperature Environment for a Long Period
of Time
Leaving this product where it will be exposed to
extremely high temperatures such as near fire or
in direct sunlight may deform the cabinet and/or
cause trouble in the internal parts. Continued use
in such a resulting condition may lead to shortcircuiting or insulation defects, etc. which may
in turn lead to a fire or electric shocks.
6
Names and Functions of Parts
The port replicator allows your peripheral devices to function exactly as if they were connected directly to the computer. (Refer to “Description of Parts” in the “Operating Instructions” accompanying the computer.)
CAUTION
Do not touch the expansion bus connector, pins or springs of the port replicator.
Rear
When using the LAN function with the computer attached to the port replicator,
use the port replicator’s LAN Port.
Do not use the computer’s LAN Port although it is visible when opening the
cover of the rear of the computer and using the Modem Port.
USB Ports (4 ports)
LAN Port
External Display Port
Connect the external display
compatible with analog interface.
Serial Port
1
*
E
Security Lock
A Kensington cable can be connected.
For more information, read the manual
that comes with the cable.
1
*
Display may be impossible using some connected external displays. For display switching when an
external display compatible with analog interface and external display compatible with DisplayPort
are connected at the same time, refer to “Switching the Display” (Ä page 10).
2
*
Not applicable to <CF-52A/B/C/D series>.
LOCK
DisplayPort
DisplayPort
Connect the external display
compatible with DisplayPort.
DC-IN Jack
DC IN 15.6V
*1*
2
Front/Right Side
Expansion Bus Connector
This connects to the
expansion bus connector on the bottom
of the computer.
Lever
Slide the lever all the way
back to release the computer.
Power Switch
This operates identically to the
power switch on the computer.
7
Connecting/Disconnecting
CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or in
the sleep (Windows Vista), standby (Windows XP) or hibernation mode.
Connecting
Power off the computer, and disconnect all cables
1
from the computer.
Connect the plug of the AC adaptor that came with
2
the computer to the DC-IN jack of the port replicator
E
and plug the other end into an AC outlet.
CAUTION
Refer to the “Operating Instructions” accompanying computer for information on proper handling of the AC adaptor and AC cord.
Slide the computer onto the port replicator, align the
3
back of the computer with the back of the port
replicator, and then slowly lower the computer to connect the expansion bus connector.
CAUTION
Do not connect the computer to a port replicator while the computer is connected to the AC adaptor or other cables.
Do not attempt to make connections if there is any object between the computer and the port replicator. Doing so could damage the computer and the
port replicator.
8
Loading...