Panasonic CFVDW07M Installation Instruction

CFVDW07 XP Setup Instructions

Verifying and updating firmware on CF-VDW07 display

• Turn on CF-VDW07 wireless display

• Press Menu button on display, Tap and select Version tab

• Check Firmware Version and make sure it is V2.00L0M12 (or later)

If firmware is not correct, follow the instructions below and from the upgradwirelessdisplayv2.doc
to upgrade the firmware.

Downloading Drivers

• Login to www.panasonic.ca

• In Customer Support click on Downloads section then click on Soft ware and Drivers

• For model number, type 'cfvdw07'

• Download "Updated tcp/ip firmware and meiwds software to use the cfvdw07 displays on

other panasonic computers, including the cf07's"
Filename: cfvdw07_firmware_meiwds_upgrade_v200l13.zip
Release 2004/4/15

Extract the files to a directory on your hard drive

Install Wireless Display software

• Extract mei-meiwds-v2.00l13c-xp-nonlogo-m-d20030502.zip or

cfvdw07_non_panasonic_meiwds_k-04-224.zip for non-Panasonic computers.

• Run setup program, click Next

• Click on Next

Click on Finish and restart computer

• After restarting the computer, a new MEIWDS icon will appear in the bottom right corner.

• Click on the black icon

↑