Panasonic CF-18 User Manual
Panasonic*
Personal Computer
OPERATING INSTRUCTIONS
..’V«
■> ?
Model No.
CF-18 Series
Contents
Getting Started
Read Me First
First-time Operation
Read Me First
Key Combi nations
Operation
Starting Up/Shutting Down..
Touch Pad (Basic Operation)...
Touchscreen (Basic Operation),
Operating in Tablet Mode
Reference Manual
• Tablet Buttons
• Touch Pad (Advanced)
• 1buchecraen(A<KQnced)
• Software keyboard • External Dtsplay
• PanasoracHandWnmg
• Display Rotation • Modem
• Starxfby/Hibernation
Functions • Wireless LAN
* Security Measures • Hard Disk Drive
* Computing on the Road• Setup Utility
• Battery Power
...........
Reference Manual
• LEO Indcators
......
..................
Reference Manual
• PC Cards
• RAM Mocfule
• Port Replicator
• USB Devices
• LAN
\
Troubleshooting
List of Error Codes
Dealing with Problems (Summary)
Reinstalling Software
Reference Manual
Techrweal Information
DMI Viewer
............................................
......................
........................................
List of Error Codes
Dealing with Problems
(Advanced)
Appendix
[Additional Manual]
Reference Manual
Thismanual can be accessed on VTxrcompulcr. Refer
to page 23 on how to access the Reference Manual.
Please read these instructions carefully before using this product and save this manual for future use.
LIMITED USE LICENSE AGREEMENT
Hard Disk Data Erase Utility
Names and Functions of Parts
Specifications
LIMITED WARRANTY........................................41
....................................................
.............................
.........................
.............
24
25
30
32
34
35
39
Customer's Record
Model No.*
Serial No.
or
Code No.
Date of Purchase
* For the Model No., insert the 12 digit number (for example, CF-18BHAZXDM) located on
the bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new
computer.
Illustrations and Terminology in this Manual
Dealer's Name
Dealer's Address
NOTE:
CAUTION.
WARNING:
iWi ndow^2000l
NOTE provides a useful fact or helpful infonnation.
CAUTION indicates a condition that may result in minor or moderate injury.
WARNING indicates a hazard that may result in moderate or serious injury.
Information for Microsoft' Windows’^ 2000 Professional users. "‘Windows” or “Windows 2000”
in this manual.
CWindôiÂ^XlA
Information for Microsoft^ Windows® XP Professional users. “Windows” or “Windows XP” in
this manual.
i Enter ) :
CInD +
[Start]-[Run]:
This illustration means to press the [Enter] key.
This illustration means to press and hold the [Fn] key, then press the [F5] key.
This illustration means to click [Start], then to click [Run].
(For some applications, you may need to double-click.)
Where to go for referred information.
Reference .
Manual >
This illustration means to refer to the Reference Manual, which is available on your computer.
Refer to page 23 on how to access this manual.
Windows 2000 screens are used in this manual when no specific OS (operating system) notes are required.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explana
tion easier to understand.
In this manual, descriptions are given using illustrations not featuring the hand strap for convenience of explanation.
If the user has logged on without administrator authority, some functions may not be executable, and some screens may be
not displayed as shown in this manual. If this happens, log on with Administrator authority to enable these functions.
Confirm the latest information on optional products in catalogs, etc. ^
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be
reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.
©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no
liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft® and Windows® are registered trademarks of Microsoft Corporation of the United States and/or other countries.
Intel, Pentium, PROSet and SpeedStep ' are either registered trademarks or trademarks of Intel Corporation.
Adobe® and Acrobat® are cither registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.
Read Me First
For U.S.A.
Federal Communications Commission Radio Frequency interference Statement
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits arc designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful.interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause hannful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures;
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface
cables when connecting to a computer or peripheral. Also, any
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment,
FCC RF Exposure Warning:
This computer is provided with PC Card slots that could be
used with wireless transmitter(s), which will be specifically rec
ommended, when they become available. Other third-party wire
less transmittcr(s) have not been RF exposure evaluated for use
with this computer and may not comply with FCC RF exposure
requirements.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance
with provided instructions and minimum 2.5 cm spacing must
be provided between antenna and all person’s body (excluding
extremities of hands, wrist and feet) during wireless modes of
operation.
This transmitter must not be co-locatcd or operated in conjunc
tion with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way
Secaucus, NJ 07094
Tel No: 1-800-LAPTOP-5 (1 -800-527-8675)
FCC Regulation Notice for modem
This equipment contains a FCC approved modem.
Manufacturer of modem: AMBIT Microsystems Corporation
Model No. T60M283.** (** = numbers or alphabet letters)
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
1. This equipment complies with CFR47 Part 68 rules. On the
computer is a label that contains, among other information,
the FCC registration number and ringer equivalence number
(REN) for this equipment. If required, this information must
be provided to the telephone company.
2. An FCC compliant telephone cord and modular plug is pro
vided with this equipment. This equipment is designed to be
connected to the telephone network or premises wiring us
ing a compatible modular jack which is Part 68 compliant.
Sec Installation Instructions for details.
3. The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs on
the telephone line may result in the devices not ringing in re
sponse to an incoming call. In most, but not all area, the sum
of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as deter
mined by the total RENs, contact the local telephone com
pany,
4. 1 f your telephone equipment cause harm to the telephone net
work, the telephone company will notify you in advice that
temporary discontinuance of service may be required. But if
advice notice isn’t practical, the telephone company will no
tify the customer as soon as possible. Also, you will be ad
vised of your right to file a complaint with the FCC if you
believe it is necessary.
5. The telephone company may take changes in it’s facilities,
equipment, operations or procedures that could affect the op
eration of the equipment. If this happens the telephone com
pany will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
6. If trouble is experienced with this equipment, for repair or
warranty information, please contact Matsushita Electric
Corporation of America at DIAL TOLL FREE 1-800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm
to the telephone network, the telephone company may re
quest that you disconnect the equipment until the problem is
resolved.
7. There are no user serviceable parts contained in this equipment.
8. This equipment may not be used on coin service provided by
the telephone company. Connection to party lines is subject
to state tariffs.
9. The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic
device to send any message via a telephone fax machine un
less such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification
of the business or other entry, or other individual sending the
message and the telephone number of the sending machine
or such business, other entity, or individual. In order to pro
gram this information into your fax software, you should re
fer to the manual of the Fax software being used.
Read Me First
lO.According to the FCC’s electrical safety advisory, we recom
mend that you may install an AC surge arrestor in the AC out
let to which this equipment is connected. Telephone compa
nies report that electrical surges, typically lightning transients,
are very destructive to customer terminal equipment connected
to AC power sources and that this is a major nationwide prob
lem.
“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom
munication line cord,"
“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des
conducteurs de télécommunications 26 AWG ou de section supérieure."
For Canada
Industry Canada (1C) Notice for modem
This equipment contains an Industry Canada approved modem unit.
The Industry Canada label is affixed on the modem unit,
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment meets
telecommunications network protective, operational and
safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements documcnt(s). The
Department does not guarantee the equipment will operate
to the user’s satisfaction.
Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the
electrical ground connections of the power utility, telephone
lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly
important in rural areas. Caution: Users should not attempt
to make such connections themselves, but should contact
the appropriate electric inspection authority, or electrician,
as appropriate.”
“NOTICE: The Ringer Equivalence Number (REN) assigned
to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.”
REN: See bottom of the computer
Notice for the products using LCD
This product uses one or more fluorescent lamps containing a
small amount of mercury. It also contains lead in some compo
nents. Disposal of these materials may be regulated in your com
munity due to environmental considerations. For disposal or
recycling information please contact your local authorities, or
the Electronics Industries Alliance: <
http://www.eiae.org/>
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL
“AVIS: L’étiquette d’industrie Canada identifie le matériel
homologué. Cette étiquette certifie que le matériel est
conforme aux nonnes de protection, d’exploitation et de
sécurité des réseaux de télécommunications, comme le
prescrivent les documents concernant les exigences
techniques relatives au matériel terminal. Le Ministère
n’assurc toutefois pas que le matériel fonctionnera à la
satisfaction de l’utilisateur.
Avant d’installer ce matériel, Eutilisateur doit s’assurer qu’il
est permis de le raccorder aux installations de l’entreprise
locale de télécommunication. Le matériel doit également être
installé en suivant une méthode acceptée de raccordement.
L’abonné ne doit pas oublier qu’il est possible que la
conformité aux conditions énoncées ci-dessus n’empêche
pas la dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être
coordonnées par un représentant désigné par le fournisseur.
L’entreprise de télécommunications peut demander à
l’utilisateur de débrancher un appareil à la suite de
réparations ou de modifications effectuées par l’utilisateur
ou à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que tous
les fils de mise à la terre de la source d’énergie électrique,
des lignes téléphoniques et des canalisations d’eau
métalliques, s’il y en a, sont raccordés ensemble. Cette
précaution est particulièrement importante dans les régions
rurales. Avertissement: L’utilisateur ne doit pas tenter de faire
CCS raccordements lui-même; il doit avoir recours à un service
d’inspection des installations électriques, ou à un électricien,
selon le cas.”
“AVIS: L’indice d’équivalence de la sonnerie (lES) assigné
à chaque dispositif temainal indique le nombre maximal de
terminaux qui peuvent être raccordés à une interface. La
terminaison d’une interface téléphonique peut consister en
une combinaison de quelques dispositifs, à la seule condition
que la somme d’indices d’équivalence de la sonnerie de touts
les dispositifs n’excède pas 5.”
lES: Voir sous le fond de l’ordinateur
Industry Canada
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interfer
ence that may cause undesired operation of the device.
Important Safety Instructions / Importantes Mesures De Sécurité
When using your telephone equipment, basic safety precau
tions should always be followed to reduce the risk of fire, elec
tric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet base
ment or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical stonn. There may be a remote risk of electric shock
from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of
the leak.
4. Use only the power cord and batteries indicated in this manual.
Do not dispose of batteries in a fire. They may explode. Check
with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Precautions
The CF-18 was developed based on thorough research into the
real-world portable computing environments. Exhaustive pur
suit of usability and reliability under harsh conditions led to in
novations such has the magnesium alloy exterior, vibration
damped hard disk drive and floppy disk drive, flexible internal
connections. The CF-18’s outstanding engineering has been
tested using the stiff MIL-STD- 81 OF (for vibration and shock)
and IP (for dust and water) based procedures.
As with any portable computer device precautions should be
taken to avoid any damage. The following usage and handling
procedures are recommended.
Before putting the computer away, be sure to wipe off any moisture.
Avoid Radio Frequency Interference
Do not place the computer near a television or
radio receiver.
Avoid iVIagnetic Fields
Keep the computer away from magnets.
Data stored on the hard disk may be lost.
Keep Small Objects Away
Do not insert paper clips or other small objects
into the computer.
Do Not Disassemble the Computer
Do not attempt to disassemble your computer.
Avoid Excessive Force on the Display
Do not apply excessive downward force on the
display when it is completely opened, especially
when plugs and/or cables are connected to the
rear of the computer.
Avoid low-temperature burns
Avoid more than casual contact with any heat
producing area of the notebook computer, power
adaptor, and any option or accessory you use with
it. Even low heat, if warmer than body tempera
ture, can cause a burn, if the skin is exposed to
the heat source for a long enough period of time.
Certaines mesures de sécurité doivent être prises pendant
Tutilisation de matérial téléphonique afin de réduire les risques
d’incendie, de choc électrique et de blessures. En voici
quelquesunes:
1. Nc pas utiliser l’appareil près de l’eau, p.ex., près d’une
baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à la
ver, dans un sous-sol humide ou près d’une piscine.
2. Eviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans
fil) pendant un orage électrique. Ceci peut présenter un risque
de choc électrique causé par la foudre.
3. Nc pas utiliser l’appareil téléphonique pour signaler une fuite
de gaz s’il est situé près de la fuite.
4. Utiliser seulement le cordon d’alimentation et le type de piles
indiqués dans ce manual. Ne pas jeter les piles dans le feu:
elles peuvent exploser. Se conformer aux règlements pertinents
quant à l’élimination des piles.
CONSERVER CES INSTRUCTIONS
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency
electromagnetic energy. The level of energy emitted by this prod
uct however is far much less than the electromagnetic energy
emitted by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in
radio frequency safety standards and recommendations, we be
lieve this product is safe for use by consumers. These standards
and recommendations reflect the consensus of the scientific com
munity and result from deliberations of panels and committees
of scientists who continually review and interpret the extensive
research literature.
In some situations or environments, the use of this product may
be restricted by the proprietor of the building or responsible rep
resentatives of the organization. These situations may for ex
ample include:
• Using this product on board of airplanes, or
• In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wire
less devices in a specific organization or environment (e.g. air
ports), you arc encouraged to ask for authorization to use this
product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference
caused by unauthorized modification of this product. The cor
rection of interference caused by such unauthorized modifica
tion will be the responsibility of the user. We and its authorized
resellers or distributors are not liable for damage or violation of
government regulations that may arise from failing to comply
with these guidelines.
Read Me First
Lithium Battery
Lithium Battery!
This computer contains a lithium battery to enable the date, time,
and other data to be stored. The battery should only be exchanged
by authorized service personnel.
Warning! A risk of explosion from incorrect installation or mis
application may possibly occur.
Precautions ( Battery Pack )
Care should be exercised with regard to the following in
order to avoid the possibility of overheating, fire or dam-
Avoid Heat
Do not throw the battery pack into a fire or
expose it to excessive heat.
Keep Articles Away
Do not place the battery pack together w'ith ar
ticles such as necklaces or hairpins when carry
ing or storing.
Do Not Disassemble
Do not insert sharp objects into the battery pack,
expose it to bumps or shocks, deform, disas
semble, or modify it.
Do Not Short
Do not short the positive (+) and negative (-)
contacts.
Avoid Extreme Heat, Cold and Direct Sun
light
Do not charge, use or leave the battery pack for
extended periods where it will be exposed to
direct sunlight, in a hot place (in car on a sunny
day, for example), or in a cold place.
Do Not Use With Any Other Computer
The battery pack is rechargeable and was in
tended for the specified computer or charger.
Do not use it with a computer other than the
one for which it was designed.
Do Not Put into a Microwave
Do not put the battery pack into a microwave
oven or a pressurized chamber.
Stop Using
Should the battery emit an abnormal odor, be
come hot to the touch, become discolored,
change shape, or become in any way different
from normal, remove it from the computer or
charger and stop using it.
Do not touch the terminals on the battery pack. The bat
tery pack may no longer function properly if the contacts
are dirty or damaged.
Do not expose the battery pack to water, or allow it to
become wet.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui pemiet de
sauvegarder certaines données comme la date et l’heure
notamment. Elle ne devra être remplacée que par un technicien
qualifie.
Avertissement! Risque d’explosion en cas de non respect de cette
mise en garde!
If the battery pack will not be used for a long period of time
(a month or more), charge or discharge (use) the battery pack
until the remaining battery level becomes 30% to 40% and
store it in a cool, dry place.
This computer prevents overcharging of the battery by re
charging only when the remaining power is less than approx.
95% of capacity.
The battery pack is not charged when the computer is first
purchased. Be sure to charge it before using it for the first
time. When the AC adaptor is connected to the computer,
charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not
rub your eyes. Immediately flush your eyes with clear water
and see a doctor for medical treatment as soon as possible.
Xnote>
The battery pack may become warm during recharging or
normal use. This is completely normal.
Recharging will not commence if internal temperature of
the battery pack is outside of the allowable temperature
range (0 °C to 50 °C {32% to 122 %}) ‘’Bat
tery Power”. Once the allowable range requirement is
satisfied, charging begins automatically. Note that the
recharging time varies based on the usage conditions. (Re
charging takes longer than usual when the temperature is
10 °C {50 or less.)
If the temperature is low, the operating time is shortened. Only
use the computer within the allowable temperature range.
This computer has a high temperature mode function that
prevents the degradation of the battery in high temperature
environments.
temperature mode is enabled in the Setup Utility (Q^
perature] mode is about a level of 80% in the [Normal
Temperature] mode.
The battery pack is a consumable item. If the amount of
time the computer can be run off a particular battery pack
becomes dramatically shorter and repeated rechargings
do not restore its performance, the battery pack should be
replaced with a new one.
When transporting a spare battery inside a package,
briefcase, etc., it is recommended that it be placed in a
plastic bag so that its contacts are protected.
Always power off the computer when it is not in use.
Leaving the computer on when the AC adaptor is not
connected will exhaust the remaining battery capacity.
{Qr “Battery Power”) If the high
“Setup Utility”), a level of 100% in the [High Tem
When Using Peripheral Devices
Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc.
Also, in addition to following this manual and the Reference Manual, carefully read the operating instruc
tions for the peripheral devices being used.
• Use only peripheral devices that conform to the computer’s specifications.
• Connect the devices properly, paying close attention to the condition and position of the connectors.
• If a connection cannot be made easily, do not apply undue force; check once more to confirm the condi
tion and position of the connector (alignment of pins, etc.) .
• If the connector has holding screws, fasten the screws firmly.
• Do not carry the computer with cables attached, and do not pull on the cables forcefully.
Saving Data on the Hard Disk
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make your software appli
cations and data unusable.
Do not power down your computer while software applications are running or hard disk drive
indicator (^) is on.
Properly shut Windows down to avoid problems.
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or should you inad
vertently change or erase data.
Use the security function for all important data. “Security Measures”)
Hard Disk-Lock
d
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the
hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk
is returned to the original computer, you can read/write data as before. In this case, however, make the settings
in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk
Lock does not guarantee the complete protection of data.) “Security Measures”)
П
Computer Viruses
Users are advised to purchase the latest versions of virus protection softw are and use them regularly.
We recommend you run the software:
• When booting your computer,
• After receiving data.
We recommend that you check data received on disks or from external sources, such as data down
loaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
When Disposing of or Transferring Ownership of This Device
When disposing of or transferring ownership of this device, completely erase all data on the hard disk in
order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal
Windows commands, data can still be read using special software. In order to erase all data, either have the
data erased by a specialist (at a charge) or use the hard disk data erase utility (included) (([J= page 34).
(Note that this hard disk data erase utility docs not guarantee that data will be completely erased.)
Also note that transferring ownership of this device without deleting software from the hard disk may
violate software user’s licenses.
Usage Environment
Environment
• In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}
Humidity: 30% to 80% RH (No condensation)
Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F)
Humidity: 30% to 90% RH (No condensation)
(To next page)
Read Me First
Handling
• This computer has been designed so as to minimize shock to the LCD and hard disk drive, etc.,
• Do not drop or hit your computer against solid objects.
• Do not carry your computer when it is on.
• Remove all external devices and cables, and PC Cards sticking out of the computer (see the
• We recommend preparing a fully charged battery.
• Do not place the computer upright or allow it to tip over. When the computer receives extremely
• Do not carry the computer while the display is open, or carry it by gripping the display.
• Do not put anything (e.g., a piece of paper) between the display and keyboard.
• Always carry your computer with you. Never check it in with luggage. For use of the com
• It is a good idea to make backup copies on disks and carry them with you.
note)-
Only use the computer within the allowable temperature range.
When the computer is left powered on in a low temperature environment, set [Turn off
hard disks] to [Never] in the following menu to avoid damage to the hard disk drive.
4WiiTdò^2000ì
[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]
[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
Places not to use your computer
• Such areas may result in damage to the computer.
Areas with electronic equipment
These areas may interfere with your display or cause your computer to produce strange sounds.
Areas with extremely high/low temperatures
• Do not leave things near the computer that arc sensitive to heat. During operation, the
computer may become warm.
but no warranty is provided against such trouble. Therefore, as a precision instrument, be
extremely careful in the handling.
figure on the left) before transporting the computer.
When transporting spare batteries inside a package, briefcase, etc., it is recommended that it
be placed in a plastic bag so that its contacts are protected.
strong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.
puter inside an aircraft, we recommend asking the airlines regarding their policy on this issue.
Touch Pad
8
Maintenance
page 19
• Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration.
In addition, do not use commercially-available household cleaners and cosmetics, as they may contain compo-
i nents hannful to the surface.
\ • Do not directly add or spray water or detergent, if liquid enters the inside of the computer, it may cause it to
work improperly or be damaged.
Display
Use the Soft Cloth included with the computer. (For more information, refer to “Suggestions
About Cleaning the LCD Surface” that comes with the Soft Cloth.)
If the Protective Film becomes dirty or damaged, it may be time to replace your Protective
Film. The Protective Film is a disposable item. To find out the model number of your Protec
tive Film, contact Panasonic Technical Support. (For more information, refer to the “Operat
ing Instructions” that come with the Protective Film.)
Do not touch the screen before you rc-attach a Protective Film, as you may leave a mark or .
scratch on the screen. ^
Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the
soft cloth and firmly w'ringing out excess water.
•
_____________
^
First-time Operation
Read the steps below to help you leam what parts are included, and to gain an understanding of
some basic computer-related operations.
1 Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or are not working properly, contact Panasonic Technical Support.
Latch
2 Read the LIMITED USE LICENSE AGREEMENT. ((^ page 32)
Before removing the seal covering the power switch, read the LIMITED USE LICENSE
AGREEMENT.
3 Insert the battery pack.
(T) Unlock the cover by sliding the latch to the right.
@ Slide the latch down, and then without releasing it, open the cover as illustrated.
@ Slide the battery pack inward until it is firmly in place,
.&AlJiTilON
-(<
• Do not touch the terminals on the battery pack and the computer. The
battery pack may no longer function properly if the contacts are dirty or
damaged. Also, the computer may not operate properly.
• Be sure to insert the battery pack as illustrated.
(4) Close the cover, then lock it by sliding the latch to the left.
Confinn that the latch lock is correctly in place. If you carry your computer
without the latch lock in place, the battery pack may fall out.
Before using the battery pack, carefully read "Precautions (Battery Pack)”
(Q= page 6).
D
------------------------------------------------
__y
First-time Operation
DC-IN Jack
G>eo
DC IN 16.0 V
Connect your computer to a power outlet.
^AlDiliieN
• Be sure the AC adaptor is connected until completing the first-time use operation.
• When using the computer for the first time, do not connect any peripheral de
vice except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
• Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
• Use only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
• When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet.
• Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless running from the battery
pack alone.
5 Open the display.
(l) Pull up on the latch A and release the latch B.
Lift open the display.
Latch A
Power Switch (j)
Power Indicator 0
Q Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indi
cator turns on before releasing it.
Do not slide the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
Do not slide the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
Setup Windows.
Moving the cursor (£^) or clicking buttons can be performed with the touch pad
page 19).
.4WitraowSf2000l
Do not press any keys or touch the touch pad until [Windows 2000 Profes
sional Setup] is displayed.
f
Do not use the touchscreen during the Windows setup.
U
(X) At [Welcome to the Windows 2000 Setup Wizard], select [Next].
After reading the agreement, select [I accept this agreement] or [1 don’t accept
this agreement], then select [Next],
‘A
J
10
Xnote>
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
1
If [I don’t ac
Select settings for your region, then select [Next].
Enter your name and organization and then select [Next].
Enter your computer name and administrator password and then select [Next].
Remember this password! If the password is forgotten, Windows cannot be
I operated. ^
Enter the correct date, time and time zone, then select [Next].
©
At [Networking Settings], select [Typical settings], then select [Next].
At [Workgroup or Computer Domain], select [No, this computer is not on a net
work, or is on a network without a domain], then select [Next].
The computer will restart.
At [Welcome to the Network Identification Wizard], select [Next],
At [Users of This Computer], select [Users must enter a user name and password
(iS)
to use this computer], then select [Next].
Select [Finish],
®
Enter your administrator password and select [OK].
tWindpwsj^XBi
(^H>
r
• Do not press any keys or touch the touch pad until [Windows XP Professional
Setup] is displayed.
• Do not use the touchscreen during the Windows setup.
(T) At [Weleome to the Windows XP Setup Wizard], scleet [Next].
@ After reading the agreement, select [I accept this agreement] or [I don’t accept this
agreement], then select [Next].
gOTE)
If [I don’t accept this agreement] is selected, the Windows setup will be aborted
@ Select settings for your region, then select [Next],
(4) Enter your name and organization and then select [Next],
® Enter your computer name and administrator password and then select [Next].
.(^m--------------------------------------------------
Remember this password! If the password is forgotten, Windows cannot be
operated.
----------------------------------------------------- ■
@ Enter the correct date, time and time zone, then select [Next],
Anote)-----------------------------------------------------------------------------
It may take two to three minutes until the next sereen is displayed. Wait, and
do not press any keys, or touch the touch pad, etc.
(7) At [Networking Settings], select [Typical settings], then select [Next],
@ At [Workgroup or Computer Domain], select [No, this computer is not on a net
work, or is on a network without a domain], then select [Next].
The computer will restart.
D
11
First-time Operation
/note)-
If “Yes, make this computer a member of the following domain” is selected,
the following message may be displayed: [An invalid domain was specified.
Would you like to proceed for now and try joining a domain later?]. In this
case, select [Yes]. After selecting [Yes], the computer will restart automati
cally, but sometimes the [Starting Windows] message will remain on the screen,
and windows will not start up. If this happens, hold (ТаЮ down while
pressing СШ) until [Network Identification Wizard] is displayed on top, and
follow the instructions on the screen.
@ Enter your administrator password and select;
If [Windows XP is currently configured to manage the Intel(R) PRO/Wircless
LAN adaptor.] is displayed, select [Yes].
Calibrate the touchscreen.
8
tWind^2000l
(T) Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].
@ Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
After the calibration procedure is executed (c.g., after the nine “+” marks arc
touched), the procedure ends when C Enter:) is pressed.
© Select [OK],
tWindo^XRi
© Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
After the calibration procedure is executed (e.g., after the nine “+” marks arc
touched), the procedure ends when (Enter) is pressed.
g
© Select [OK].
12
(Windoi^XRi
Create a new account.
© Select [Start] - [Control Panel] - [User Accounts] - [Create a new account].
© Enter a name for the new account, then select [Next],
© Select [Computer administrator], then select [Create Account],
© <When you want to create a password for the new account>
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
© Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.
eAiijiiiON
(i
Remember this password! If the passw'ord is forgotten, Windows cannot be operated.
You can create a password reset disk beforehand ((^^ page 14).
Xnote>
When creating a new user account:
• If you make mail settings, create password reset disks ((^ page 14), or conduct
other related operations before creating the user account, you will be unable to use
any previous mail history or settings.
• When you create the first new account, you can only select [Computer administra
tor].
Once a “Computer Administrator” account has been created, you can create addi
tional limited user accounts.
Note also that only the added user account will be displayed in the Welcome screen.
The account for the administrator created during Windows setup will not be dis
played.
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless
LAN”.
Create BACKUP Disks for Reinstallation
To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and format
ted 2HD floppy disks are needed.
(T) Connect the USB floppy disk drive to your computer.
NOTE^
The floppy disk drive must be the A drive.
Prepare 2HD floppy disks and make sure they arc
not in the write-protected state, and then set it.
©CKBSED
Seleet [Start] - [Programs] - [Panasonic] - [Create
Backup Disk] and follow the on-screen instruc
tions.
tWindowsfXRi
Select [Start] - [All Programs] - [Panasonic] - [Cre
ate Backup Disk] and follow the on-screen instruc
tions.
(4) Place a label identifying the contents on each disk.
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create
the disk by following the on-screen instructions.)
Store the floppy disks in a safe place. They will enable you to return your
computer to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is
displayed, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk,
power off the computer or use the standby or hibernation function (C^
“Standby/Hibemation Functions”).
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to
its original state. In this case, contact Panasonic Technical Support.
face, and insert the
shutter-side headfirst.
( This concludes the first-time use operation guidelines. )
13
First-time Operation
Information for Windows XP
Depending on the Windows settings, installed applications, and drivers, menus and
other displays may differ, or some functions (such as use of the password reset disk)
may be inoperable.
You can select Classic view for the Control Panel or select the Classic Start menu.
You can also change the way a user logs on or off.
The procedure in this manual uses the method of the Windows XP default setting
(not Classic Start menu etc.).
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following
the steps below.
1 Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.
2 Select [Start] - [Control Panel] - [User Accounts] and select the account you used
to logon.
3 Select [Prevent a forgotten password] from the [Related Tasks] menu of the ac
count you have logged on to and create a password reset disk following the on
screen instructions.
Store the password reset disk in a safe place.
• Only the logon password for each account can be reset.
The password set in the Setup Utility cannot be reset.
14
Loading...