Panasonic AVM3P (PS) User guide
AVM3P
RoHS compliant
ORDERING INFORMATION
Ex. AVM3 1 0 5 P 9
Type of switch
PS switch
1:
2:
3:
4:
Te r minals
Self-standing solder terminal
with guard
Self-standing solder terminal
without guard
Self-standing solder terminal
with opposite side guard
Self-standing PC terminal
HIGH CAPACITY,
LONG LIFE
SUBMINIATURE SWITCH
FEATURES
• 10.1 Amp. high contact capacity is
available
• Long life
• Precise operating position
(±0.25mm: Pin plunger type)
• Flux-resistant construction with
integrally molded terminals
• In-line terminals make soldering
works easy
• UL/CSA approved
Actuators
0:
Pin plunger
1:
Short hinge lever
2:
Hinge lever
3:
Long hinge lever
4:
Simulated roller lever
5:
Roller lever
Operating force
by pin plunger, max.
5: 1.47 N
AVM3P (PS)
SWITCHES
TYPICAL
APPLICATIONS
• Heaters
• Electric rice cookers
• Copiers
• Printers
• Facsimiles
• Vending machines
• Measuring equipment
• Audio equipment
Capacity
P: High capacity
(10.1 A)
Agency
standard
9: UL/CSA
CONSTRUCTION CONTACT
ARRANGEMENT: SPDT
COM NO NC
DATA
Electrical life curve
30
4
20
10
5
No. of operations, ×10
3
1
0510
Load current (A)
AECTB12E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
AVM3P
8.7
±0.15
15.4
±0.1
Pin plunger position
(10.55)
3-1.2 dia.
±0.05
PRODUCT TYPES
Part No.
Contact Actuator
Without guard With guard
Pin plunger AVM3205P9 AVM3105P9 AVM3305P9 AVM3405P9
Short hinge lever AVM3215P9 AVM3115P9 AVM3315P9 AVM3415P9
Gold-clad
Hinge lever AVM3225P9 AVM3125P9 AVM3325P9 AVM3425P9
Long hinge lever AVM3235P9 AVM3135P9 AVM3335P9 AVM3435P9
Simulated roller lever AVM3245P9 AVM3145P9 AVM3345P9 AVM3445P9
Roller lever AVM3255P9 AVM3155P9 AVM3355P9 AVM3455P9
SPECIFICATIONS
1. Contact rating
Resistive load (cos φ ] 1) 10.1A, 250V AC
2. Characteristics
Expected life
Dielectric
strength
Insulation resistance Min. 100MΩ (at 500V DC)
Contact resistance (initial) Max. 50mΩ (By voltage drop, 1A 6 to 8V DC)
Allowable operating speed (at no load) 0.1 to 1,000 mm/sec.
Max. operating cycle rate (at no load) 300 cpm
Ambient temperature –25 to +85°C (Not freezing below 0°C)
Unit weight Approx. 2g
Contact material AgNi alloy
3. Operating characteristics
Actuator
Pin plunger 1.47 N 0.20 N 0.6 mm 0.1 mm 0.4 mm 8.4±0.25 mm
Short hinge lever 0.59 N 0.039 N 2.5 mm 0.5 mm 0.8 mm 8.8±0.8 mm
Hinge lever 0.54 N 0.034 N 2.8 mm 0.8 mm 1.2 mm 8.8±0.8 mm
Long hinge lever 0.44 N 0.029 N 3.5 mm 1.0 mm 1.6 mm 8.8±1.2 mm
Simulated roller lever 0.54 N 0.034 N 2.8 mm 0.8 mm 1.2 mm 11.65±0.8 mm
Roller lever 0.59 N 0.039 N 2.5 mm 0.5 mm 0.8 mm 14.5±0.8 mm
DIMENSIONS
1. Self-standing PC terminal (Without guard)
Pin plunger
CAD Data
Electrical Min. 5 × 104 (at 20 cpm) (O.T. max.)
Mechanical Min. 3 × 107 (O.T.: Specified value), at 60 cpm
Between terminals 1,000 Vrms for 1 min. (at 10 mA)
Between terminals and other exposed metal parts 2,000 Vrms for 1 min. (at 10 mA)
Between terminals and ground 2,000 Vrms for 1 min. (at 10 mA)
Operating force,
Max.
Release force,
Pretravel, Max. mmMovement differential,
Min.
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e
Self-standing solder terminal
Max. mm
With opposite
side guard
Self-standing
PC terminal
Overtravel, Min. mmOperating position
mm
mm General tolerance: ±0.25
PC board pattern
(
)
2.2
6.7
0.9
0.6 max.
(
O.P.
8.4
±0.15
3.4
2.4 dia.
±0.1
P.T.
4.0
±0.2
)
±0.25
(
)
O.P.
±0.35
11.8
+0.1
-0.05
5.2
6.4
1.85
±0.12
1.5
±0.12
1.1
0.5
±0.1
1.25
±0.2
±0.3
7.6
1.8
+0.1
7.7
2.4
-0.05
NO
NC
±0.1
±0.1
2.2
±0.15
±0.3
0.75
0.5
C
2.5
9.5
±0.15
8.7
15.4
19.8
2.4
7.4
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
Pretravel, Max. mm 0.6
Movement differential,
Max. mm
0.1
Overtravel, Min mm 0.4
Operating
position
Distance from
mounting hole, mm8.4±0.25
AECTB12E 201201-T
Loading...