Panasonic av-hsb300g Operation Manual

Operating Instructions

HD Analog Board

Model No. AV-HSB300G

FRANÇAIS DEUTSCH ENGLISHITALIANOESPAÑOL

Before operating this product, please read the instructions carefully and save this manual for
future use.

РУССКИЙ

日本語

ENGLISH VERSION

Safety precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.

WARNING:

• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.

• THE APPARATUS SHALL NOT BE EXPOSED
TO DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE
APPARATUS.

For CANADA

This class A digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe A
est conforme à la norme NMB-003 du
Canada.

FCC Note:

This equipment has been tested and found
to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy, and
if not installed and used in accordance with
the instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER CHANGES OF SWITCH
SETTINGS INSIDE THE UNIT TO QUALIFIED
SERVICE PERSONNEL.

indicates safety information.

Warning:

To assure continued FCC emission limit
compliance, the user must use only shielded
interface cables when connecting to external units.
Also, any unauthorized changes or modifications
to this equipment could void the user’s authority to
operate it.

1 (E)

Safety precautions

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the
unit and the applicable safety instructions listed below. Keep these operating instructions handy for future
reference.

ENGLISH

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.

8) Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.

9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord form being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11) Only use attachments/accessories specified by
the manufacturer.

12) Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus during lightning storms
or when unused for long periods of time.

14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.

indicates safety information.

2 (E)

Safety precautions

Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)

This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated
collection points, where they will be accepted on a free of charge basis. Alternatively, in some
countries you may be able to return your products to your local retailer upon the purchase of an

equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct
method of disposal.

Contents

Safety precautions ....................................... 1

Introduction ................................................... 3

Accessory ..................................................... 3

Name of each part ........................................ 4

Mounting ....................................................... 4

Connections .................................................. 7

Appearance ................................................... 8

Specifications ............................................... 8

Introduction

Installing this HD analog board in a multi-format live switcher AV-HS300G makes it possible to support five HD
analog component inputs. The signal formats support HD formats (1080/59.94i, 1080/50i, 720/59.94p, 720/50p).

Accessory

Operating instructions .................. 1

3 (E)

Name of each part

!.!,/').0543



9 0B 0R9 0B 0R9 0B 0R9 0B 0R9 0B 0R

    

1 to 5: Analog HD component input connectors [ANALOG INPUTS 1 to 5]

Mounting

ENGLISH

Install this board in the multi-format live switcher AV-HS300G.

<NOTES>

 Be sure to ask the store or dealer where you purchased the product for assistance with mounting and

removal.

 Set to OFF and unplug the power connector before mounting and removal.
 Before handling the HD analog board, touch a metal part of the AV-HS300G to discharge the static

electricity from the human body.
An anti-static wrist strap is recommended for safety. Failures may be caused if you touch the HD analog
board while you are still charged with static electricity.

 Keep the metal parts of the HD analog board free of contact with other metal parts.
 Be sure to mount the blank panel installed with the AV-HS300G, after removing the HD analog board.

1 Turn off the power of the AV-HS300G, and unplug the power connector.

2 Remove the 6 screws (A).

AV-HS300G

Screws (A)

4 (E)

Mounting

3 Remove the upper panel cover.

Upper panel cover

4 Remove the 2 screws (B), and remove the blank panel.

Blank panel

Screws (B)

5 Remove the 3 screws (C) and 1 cable clamp.

Screws (C)

Cable clamp

6 Insert the HD analog board from the inside of the rear panel, and insert it along the guide rail for the connector.

(Insert it securely and completely.)

HD analog board

Connector

5 (E)

Mounting

STATS
15/15

ALM
NO

OPT
ANLG

VER

1.00

SDI IN2
IN3
IN4
IN5

IN1-5
1/15

SIG
IN1

MODE

ANLG

GAIN

-30—30

-

7 Install the board securely using the 2 screws (B)

and 3 screws (C).
(At this stage, install the cable clamp as well.)

Screws (B)

Cable clamp

8 Tighten the 6 screws (A) for the upper panel

cover securely.

9 After attaching the required cables, insert the power connector and turn the power on.

For details on the setting and operating procedures, refer to the operating instructions of the AV-HS300G.

If the HD analog board has been connected properly, “ANLG” will appear at the OPT item on the
AV-HS300G ’s SETUP/STATS menu (15/15).

Screws (C)

Screws (A)

ENGLISH

In order for the analog HD component signals to take effect, select “ANLG” (analog HD component) in the

MODE item setting for each of the input channels (IN1 to IN5) from the AV-HS300G ’s SETUP/IN1-5 menu
(1/15). Analog HD component signals and SDI signals cannot be used at the same time in the same input
channel.
Additionally, the gain of the input signals is set using the GAIN item.(The gain can be set within the
30-step range, and the setting will result in changes of 2 dB. The amount by which the gain changes per
step is not the same for each step.)

Removal procedure

Remove the HD analog board by following the procedures for mounting it in reverse.

6 (E)

Connections

 Make the connection with the HD analog board while the power is off.
 For details on connecting individual devices, refer to the respective operating instructions.
 For details on operating individual devices, refer to the respective operating instructions.

Connections when gen-lock is not implemented (frame synchronizer ON)

SDI (HD)

HD camera

HD camera

HD camera

DVD player

VTR

SDI (HD)

HD Component

HD component

monitor

HD Component

SDI (HD)

HD SDI monitor

HD Component

HD component
monitor

HD Component

HD Component

Multi-format
live switcher

AV-HS300G

PC

DVI or VGA

HD analog board

AV-HSB300G

7 (E)

AC adapter
AW-PS505A

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY

UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA

Headquarters:

3 Panasonic Way 4E-7, Secaucus, NJ 07094 [phone]

EASTERN ZONE:

3 Panasonic Way 4E-7, Secaucus, NJ 07094 [phone]

WESTERN ZONE:

3330 Cahuenga Blvd. West, Los Angeles, CA 90068 [phone]

Government office:

[phone]

Broadcast PARTS INFORMATION & ORDERING:

9:00 a.m. – 5:00 p.m. (PST) [phone]/24 Hr. Fax [phone]
Emergency after hour parts orders [phone]

TECHNICAL SUPPORT:

Emergency 24 Hour Service [phone]

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3 [phone]

Panasonic de Mexico S.A. de C.V.

Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127

Panasonic Puerto Rico Inc.

San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 [phone]

© 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved.

Matsushita Electric Industrial Co., Ltd.

Web Site: http://pana s o n i c . n e t

松下電器産業株式会社　ブロードメディア本部

〒223-8639　横浜市港北区綱島東4丁目3番1号　　 フリーダイヤル　0120－878－410

© 2006 Matsushita Electric Industrial Co., Ltd.

Printed in Japan
Gedruckt in Japan
Imprimé au Japon
Stampato in Giappone
Impreso en Japón

Напечатано в Японии

VQTB0155-1 F1206S2037

（松下電器産業株式会社）

All Rights Reserved.

D