Panasonic AV-HS450 Menu Information

8. Setting menu table

A setting is entered when an item displayed (↓) is selected and then the [F1], [F2], [F3], [F4] or [F5] switch is pressed. (It will not be entered unless the switch is pressed.)

KEY KEY 1 Parameter Type LumKey Fill PVW

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

KEY Setting range Lum, Linear,

Default value Linear ChrmOff Bus Auto

KEY 2 Parameter Clip Gain Density Invert

Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off

Default value 0.0 100.0 100.0 Off

KEY 3 Parameter Hue Sat Lum Load ↓

FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0

Default value 0.0 0.0 100.0 White

KEY 4 Parameter Type Width Direc

Edge Setting range Off, Border, Drop,

Default value Off 2 0

KEY 5 Parameter Hue Sat Lum Load ↓

EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0

Default value 0.0 0.0 0.0 Black

KEY 6 Parameter X-Pos Y-Pos CopyTo ↓

WIPEPos Setting range −100.00 to 100.00 −100.00 to 100.00 Displays the copy

Default value 0.00 0.00

KEY 7 Parameter X-Pos Y-Pos CopyTo ↓

SQPos Setting range −100.00 to 100.00 −100.00 to 100.00 Displays the copy

Default value 0.00 0.00

KEY 8 Parameter X-Pos Y-Pos Size

FlyKEY Setting range −100.00 to 100.00 −100.00 to 100.00 0.0 to 400.0

Default value 0.00 0.00 100.0

KEY 9 Parameter Light

Modify Setting range On, Off

Default value Off

KEY 10 Parameter Mask Invert

Mask Setting range Off, Manual, 4:3 On, Off

Default value Off Off

Parameter 1 Parameter 2 Parameter 3 Parameter 4

ChrmOn, ChrmOff Bus, Matte Auto, Off, On

Chroma, Full

White, Yellow, Cyan, Green, Magenta, Red, Blue, Black

0 to 4

Shadow, Outline

0, 45, 90, 135, 180, 225, 270, 315

White, Yellow, Cyan, Green, Magenta, Red, Blue, Black

destination.

163

8. Setting menu table

KEY KEY 11 Parameter Left Top Bottom Right

CHR KEY CHRKEY 1 Parameter AutCmp ↓ RESET ↓

PinP1 PinP1 1 Parameter Shape CrclAsp Density PVW

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

MaskAdj Setting range −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00

Default value –25.00 25.00 –25.00 25.00

KEY 12 Parameter OutPatt

Trans Setting range Nor, Rev

Default value Nor

AutoCmp Setting range

Default value

CHRKEY 2 Parameter View Mode UNDO ↓

Sample1 Setting range Cmpsit, Matte,

Default value Cmpsit SelBG

CHRKEY 3 Parameter View Mode UNDO ↓

Sample2 Setting range Cmpsit, Matte,

Default value Cmpsit Spill–

CHRKEY 4 Parameter View Spill Trans Detail

FineTun Setting range Cmpsit, Matte,

Default value Cmpsit 0 0 0

PinP1 Setting range Square, Circle 0.0 to 100.0 0.0 to 100.0 On, Off

Default value Square 0.0 100.0 Off

PinP1 2 Parameter Border Width Soft Mode

Border Setting range Off, On 0.1 to 100.0 0.0 to 100.0 Fix, Var

Default value Off 5.0 0.0 Fix

PinP1 3 Parameter Hue Sat Lum Load ↓

BodrCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 100.0 White

PinP1 4 Parameter X-Pos Y-Pos Size

Position Setting range −50.00 to 50.00 −50.00 to 50.00 0.00 to 100.00

Default value 0.00 0.00 25.00

PinP1 5 Parameter XYZ

Rotation Setting range –360 to 360 –360 to 360 –360 to 360

Default value 0 0 0

Parameter 1 Parameter 2 Parameter 3 Parameter 4

SelBG, Cln.BG,

Proc.FG, FG

Cln.FG, Spl.Spg

Spill–, Spill+, Matte–, Matte+, Detail–, Detail+, MatSpng, MkFGTrn, RstrDtl

–1000 to 1000 –1000 to 1000 –1000 to 1000

Cyan, Green, Magenta, Red, Blue, Black

164

8. Setting menu table

PinP1 PinP1 6 Parameter Trim Manual

PinP2 PinP2 1 Parameter Shape Density PVW

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

Trim Setting range Manual, Off, 4:3

Default value Off Free

PinP1 7 Parameter Left Top Bottom Right

TrimAdj Setting range −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00

Default value –40.00 40.00 –40.00 40.00

PinP1 8 Parameter Prior Synm

Sync Setting range 1over2, 2over1 Off, X, Y, Center

Default value 1over2 Off

PinP2 Setting range Square 0.0 to 100.0 On, Off

Default value Square (ﬁ xed) 100.0 Off

PinP2 2 Parameter Border Width Soft Mode

Border Setting range Off, On 0.1 to 100.0 0.0 to 100.0 Fix, Var

Default value Off 5.0 0.0 Fix

PinP2 3 Parameter Hue Sat Lum Load ↓

BodrCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 100.0 White

PinP2 4 Parameter X-Pos Y-Pos Size

Position Setting range −50.00 to 50.00 −50.00 to 50.00 0.00 to 100.00

Default value 0.00 0.00 25.00

PinP2 5 Parameter XYZ

Rotation Setting range –360 to 360 –360 to 360 –360 to 360

Default value 0 0 0

PinP2 6 Parameter Trim Manual

Trim Setting range Manual, Off, 4:3 Free, Pair

Default value Off Free

PinP2 7 Parameter Left Top Bottom Right

TrimAdj Setting range −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00

Default value –40.00 40.00 –40.00 40.00

PinP2 8 Parameter Prior Synm

Sync Setting range 1over2, 2over1 Off, X, Y, Center

Default value 1over2 Off

Parameter 1 Parameter 2 Parameter 3 Parameter 4

Free, Pair (The setting is ﬁ xed at Off when Circle has been set for the Shape item on the PinP1 sub menu.)

Cyan, Green, Magenta, Red, Blue, Black

165

8. Setting menu table

DSK1 DSK1 1 Parameter Type LumKey Fill PVW

DSK2 DSK2 1 Parameter Type LumKey Fill PVW

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

DSK1 Setting range Lum, Linear ChrmOn, ChrmOff Bus, Matte On, Off

Default value Linear ChrmOff Bus Off

DSK1 2 Parameter Clip Gain Density Invert

Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off

Default value 0.0 100.0 100.0 Off

DSK1 3 Parameter Hue Sat Lum Load ↓

FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 100.0 White

DSK1 4 Parameter Type Width Direc

Edge Setting range Off, Border, Drop,

Default value Off 2 0

DSK1 5 Parameter Hue Sat Lum Load ↓

EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 0.0 Black

DSK1 6 Parameter Mask Invert

Mask Setting range Off, Manual, 4:3 On, Off

Default value Off Off

DSK1 7 Parameter Left Top Bottom Right

MaskAdj Setting range −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00

Default value –25.00 25.00 –25.00 25.00

DSK2 Setting range Lum, Linear ChrmOn, ChrmOff Bus, Matte On, Off

Default value Linear ChrmOff Bus Off

DSK2 2 Parameter Clip Gain Density Invert

Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off

Default value 0.0 100.0 100.0 Off

DSK2 3 Parameter Hue Sat Lum Load ↓

FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 100.0 White

Parameter 1 Parameter 2 Parameter 3 Parameter 4

Cyan, Green, Magenta, Red, Blue, Black

0 to 4 0, 45, 90, 135, Shadow, Outline

180, 225, 270, 315

Cyan, Green, Magenta, Red, Blue, Black

166

8. Setting menu table

DSK2 DSK2 4 Parameter Type Width Direc

TIME TIME 1 Parameter TransTime Unit

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

Edge Setting range Off, Border, Drop,

Default value Off 2 0

DSK2 5 Parameter Hue Sat Lum Load ↓

EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 0.0 Black

DSK2 6 Parameter Mask Invert

Mask Setting range Off, Manual, 4:3 On, Off

Default value Off Off

DSK2 7 Parameter Left Top Bottom Right

MaskAdj Setting range −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00

Default value –25.00 25.00 –25.00 25.00

BKGD Setting range 0 to 33s

Default value 1s 0f Sec

TIME 2 Parameter TransTime Unit KEY Setting range 0 to 33s

Default value 1s 0f Sec

TIME 3 Parameter TransTime Unit PinP1 Setting range 0 to 33s

Default value 1s 0f Sec

TIME 4 Parameter TransTime Unit PinP2 Setting range 0 to 33s

Default value 1s 0f Sec

TIME 5 Parameter TransTime Unit DSK1 Setting range 0 to 33s

Default value 1s 0f Sec

TIME 6 Parameter TransTime Unit DSK2 Setting range 0 to 33s

Default value 1s 0f Sec

TIME 7 Parameter TransTime Unit ENBL AUX1 Setting range 0 to 33s

Default value 1s 0f Sec Enable

Parameter 1 Parameter 2 Parameter 3 Parameter 4

0 to 4 0, 45, 90, 135, Shadow, Outline

0 to 999f Frame, Sec (When 59.94 Hz is selected)

0 to 999f Frame, Sec Enable, Disable (When 59.94 Hz is selected)

180, 225, 270, 315

Cyan, Green, Magenta, Red, Blue, Black

167

8. Setting menu table

TIME TIME 8 Parameter TransTime Unit

CBGD CBGD 1 Parameter Hue Sat Lum Load ↓

BKGD BKGD 1 Parameter Border Width Soft

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

EFF DSLV Setting range 0 to 33s

Default value 1s 0f Sec

TIME 9 Parameter TransTime Unit FTB Setting range 0 to 33s

Default value 1s 0f Sec

CBGD Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 100.0 White

Border Setting range On, Off 0.1 to 100.0 0.0 to 100.0

Default value Off 5.0 0.0

BKGD 2 Parameter Hue Sat Lum Load ↓ BodrCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,

Default value 0.0 0.0 100.0 White

BKGD 3 Parameter X-Pos Y-Pos CopyTo ↓ WIPEPos Setting range −100.00 to 100.00 −100.00 to 100.00 Display only

Default value 0.00 0.00

BKGD 4 Parameter X-Pos Y-Pos CopyTo ↓ SQPos Setting range −100.00 to 100.00 −100.00 to 100.00 Display only

Default value 0.00 0.00

BKGD 5 Parameter Light Trim 4:3Auto Modify Setting range On, Off Off, 16:9 (On), 4:3,

Default value Off Off Off

BKGD 6 Parameter Type Base Setting range FMEM1 to 4,

Default value Black

Parameter 1 Parameter 2 Parameter 3 Parameter 4

0 to 999f Frame, Sec (When 59.94 Hz is selected)

Cyan, Green, Magenta, Red, Blue, Black

 “-” is displayed

when the SQ2, SL2 or 3D2 wipe pattern for the background transition has been selected using the [BKGD PATT] button.

Cyan, Green, Magenta, Red, Blue, Black

On, Off

4:3Smth

Black, CBGD

(Selection enabled when HD format is used)

168

8. Setting menu table

IMAG A IMG A 1 Parameter On/Off

IMAG B IMG B 1 Parameter On/Off

FMEM FMEM 1 Parameter FMEM Select Review Exec ↓

SDCard SDCard 1 Parameter Mode ↓ Select SaveFile Exec ↓

CTL CTL 1 Parameter Edit-EN COM-EN

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

IMAG A Setting range On, Off

Default value Off

IMG A 2 Parameter On/Off Y-Level C-Level Paint Setting range On, Off 0 to 7 0 to 7

Default value Off 0 0

IMG A 3 Parameter On/Off Hue Sat Mono Setting range On, Off 0.0 to 359.9 0.0 to 100.0

Default value Off 0.0 0.0

IMG A 4 Parameter On/Off Mode Effect Mosa/Def Setting range On, Off Mosaic, Defocus 0.0 to 100.0

Default value Off Mosaic 20.0

IMAG B Setting range On, Off

Default value Off

IMG B 2 Parameter On/Off Y-Level C-Level Paint Setting range On, Off 0 to 7 0 to 7

Default value Off 0 0

IMG B 3 Parameter On/Off Hue Sat Mono Setting range On, Off 0.0 to 359.9 0.0 to 100.0

Default value Off 0.0 0.0

IMG B 4 Parameter On/Off Mode Effect Mosa/Def Setting range On, Off Mosaic, Defocus 0.0 to 100.0

Default value Off Mosaic 20.0

AUX Setting range FMEM1 to 4 AUX1 to 4 On, Off

Default value FMEM1 AUX1 Off

FMEM 2 Parameter Mode Select Exec ↓ Memory Setting range AUTO, Manual FMEM1 to 4, ALL

Default value AUTO ALL

File Setting range

Default value — — —

SDCard 2 Parameter Images FreeSpace GetInf ↓ CardInfo Setting range MB/ MB

Default value

RS422 Setting range Enable, Disable Enable, Disable

Default value Enable Enable

Parameter 1 Parameter 2 Parameter 3 Parameter 4

Load, Save, Init, Delete, No Card

FMEM1 to 4,

SetUp

HS001

169

8. Setting menu table

CAM CAM 1 Parameter CTL Signal Tally Protcol

XPT XPT 1 Display only

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

CamCTL1 Setting range 1 to 5 IN1 to 16,

Default value 1 None Disable P/TCont

CAM 2 Parameter CTL PosCont PTSpeed Power ↓ CamCTL2 Setting range 1 to 5 PanTilt,

Default value 1 PanTilt Fast On

CAM 3 Parameter CTL C-Menu ↓ Item Val/Y/N CamMenu Setting range 1 to 5 On, Off Cursor Cursor

Default value 1 — — —

Status1 XPT 2 Display only Status2 XPT 3 Display only Status3 XPT 4 Display only Status4 XPT 5 Parameter XPT Signal Shift Sf-Lock XPTAsign Setting range 1 to 32 IN1 to 16,

Default value — — Right Off

XPT 6 Parameter Timing XPT Swch Setting range Any, Field1, Field2

Default value Any

Parameter 1 Parameter 2 Parameter 3 Parameter 4

Enable, Disable P/TCont, IN-A1, IN-A2, IN-B1, IN-B2, None

Fast, Middle, Slow On, Off Zm/Focs

XPT: 1 2 3 4 5 6 7 8 SIG:BK 1 2 3 4 5 6 7

XPT: 9 10 11 12 13 14 15 16 SIG: 8 9 10 11 12 13 14 Sf

XPT:17 18 19 20 21 22 23 24 SIG:15 16 A1 A2 B1 B2 - -

XPT:25 26 27 28 29 30 31 32 SIG:- PG PV KO CL M1 M2 Sf

Off, Right, Left On, Off IN-A1, IN-A2, IN-B1, IN-B2, Black, CBGD, CBAR, FMEM1 to 4, PGM, PVW, CLN, MV1, MV2 (AUX bus only), None

P/TDirt

170

8. Setting menu table

MV MV 1 Parameter Split Pos Signal

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

MV1 PATT Setting range 16Split, 10Split,

Default value 10Split 1 IN1 to 10

MV 2 Parameter Frame Char Label Tally MV1Frame Setting range LUM 0%,

Default value LUM75% LUM75% On Red+GRN

MV 3 Parameter Split Pos Signal MV2 PATT Setting range 16Split,

Default value 10Split 1 IN1 to 10

MV 4 Parameter Frame Char Label Tally MV2Frame Setting range LUM 0%,

Default value LUM75% LUM75% On Red+GRN

Parameter 1 Parameter 2 Parameter 3 Parameter 4

9Split, 4Split (The screen can be split into a total of up to 20 screens when the number of MV1 split screens and number of MV2 split screens are combined.)

LUM25%, LUM50%, LUM75%, LUM100%, Off

10Split, 9Split, 4Split (The screen can be split into a total of up to 20 screens when the number of MV1 split screens and number of MV2 split screens are combined.)

LUM25%, LUM50%, LUM75%, LUM100%, Off

LUM 0%, LUM25%, LUM50%, LUM75%, LUM100%, Off

1 to 16,

1 to 10,

1 to 9,

1 to 4

On, Off Red, Red+GRN,

1 to 16,

1 to 10,

1 to 9,

1 to 4

On, Off Red, Red+GRN,

IN1 to 16, IN-A1, IN-A2, IN-B1, IN-B2, CBGD, FMEM1 to 4, PGM, PVW, KeyOut, AUX1 to 4

Off

IN1 to 16, IN-A1, IN-A2, IN-B1, IN-B2, CBGD, FMEM1 to 4, PGM, PVW, KeyOut, AUX1 to 4

Off

171

8. Setting menu table

INPUT INPUT XX*

Sub menu Third menu Parameter 1 Parameter 2 Parameter 3

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

(SDI)

* IN1 to IN16, A1,

A2, B1 or B2 is displayed for X. (A1, A2, B1 or B2 are available when the AV-HS04M2 option board has been connected.)

FS Parameter FS Mode ↓ 1/15 Setting range On, Off

Default value On Normal Freeze Parameter Select Freeze ↓ 2/15 Setting range Frame, Field Toggling between

Default value Frame Off Name Parameter Type ↓ Name 3/15 Setting range

Default value Defalt UpConv1 Parameter Scale ↓ MovDet ↓ Sharp ↓ 4/15

(IN13 to IN16, A1, A2, B1 or B2 only)

UpConv2 Parameter EC-Pos 5/15

(IN13 to IN16 only)

CC Parameter CC InLimit CLEAR ↓ 6/15

(IN9 to IN16 only)

CC Prc1 Parameter Y-Gain Ped 7/15

(IN9 to IN16 only) CC Prc2 Parameter C-Gain Hue ClorCnv

8/15 (IN9 to IN16 only)

CC Trn1 Parameter BLv-R BLv-G BLv-B 9/15

(IN9 to IN16 only) CC Trn2 Parameter GPos-R GPos-G GPos-B

10/15 (IN9 to IN16 only)

CC Trn3 Parameter GLv-R GLv-G GLv-B 11/15

(IN9 to IN16 only)

rn4 Parameter WLv-R WLv-G WLv-B

CC T

12/15 (IN9 to IN16 only)

CC MTX1 Parameter R-G R-B 13/15

(IN9 to IN16 only) CC MTX2 Parameter G-R G-B

14/15 (IN9 to IN16 only)

CC MTX3 Parameter B-R B-G 15/15

(IN9 to IN16 only)

Setting range

Default value SQ 3 3

Setting range Center, Right, Left

Default value Center

Setting range On, Off Off, 108, 104, 100 Prc, Trn, MTX,

Default value Off Off ALL

Setting range 0.0 to 200.0 –20.0 to 20.0

Default value 100.0 0.0

Setting range 0.0 to 200.0 0.0 to 359.9 On, Off

Default value 100.0 0.0 On

Setting range –0.500 to 0.500 –0.500 to 0.500 –0.500 to 0.500

Default value 0.000 0.000 0.000

Setting range 0.25 to 0.75 0.25 to 0.75 0.25 to 0.75

Default value 0.50 0.50 0.50

Setting range 0.000 to 1.000 0.000 to 1.000 0.000 to 1.000

Default value 0.500 0.500 0.500

Setting range 0.500 to 1.500 0.500 to 1.500 0.500 to 1.500

Default value 1.000 1.000 1.000

Setting range –1.00 to 1.00 –1.00 to 1.00

Default value 0.00 0.00

Setting range –1.00 to 1.00 –1.00 to 1.00

Default value 0.00 0.00

Setting range –1.00 to 1.00 –1.00 to 1.00

Default value 0.00 0.00

Defalt, Preset, User

SQ, EC, LB 1 to 5 1 to 5

Normal, DbyD,

UC, Auto

On and Off

ALL

172

8. Setting menu table

INPUT INPUT XX*

Sub menu Third menu Parameter 1 Parameter 2 Parameter 3

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

(ANA)

* A1, A2, B1 or

B2 is displayed for X. (This sub menu is available when the AV-HS04M2 option board has been connected.)

INPUT XX* (DVI)

* A1, A2, B1 or

B2 is displayed for X. (This sub menu is available when the AV-HS04M3 option board has been connected.)

INPUT XX* (F-DVI)

* A1, A2, B1 or

B2 is displayed for X. (This sub menu is available when the AV-HS04M8 option board has been connected.)

FS Parameter FS Mode ↓ AnaGain

–

1/4 Setting range On, Off

Default value On Normal 0 Freeze Parameter Select Freeze ↓ 2/4 Setting range Frame, Field Toggling between

Default value Frame Off Name Parameter Type ↓ Name 3/4 Setting range

Default value Defalt UpConv1 Parameter Scale ↓ MovDet ↓ Sharp ↓ 4/4 Setting range

Default value SQ 3 3 Freeze Parameter Select Freeze ↓ 1/4 Setting range Frame, Field Toggling between

Default value Frame Off Name Parameter Type ↓ Name 2/4 Setting range

Default value Defalt DVIIn Parameter Mode Scale Auto ↓ 3/4 Setting range

Default value Dig Fit-V Black DVIPhs Parameter ClkPhs H-Pos V-Pos 4/4 Setting range –16 to 15 –100 to 100 –100 to 100

Default value 0 0 0 Freeze Parameter Select Freeze ↓ 1/4 Setting range Frame, Field Toggling between

Default value Frame Off Name Parameter Type ↓ Name 2/4 Setting range

Default value Defalt DVIIn Parameter Mode Scale Auto ↓ 3/4 Setting range — Fit-V, Fit-H, Full —

Default value — Fit-V — DVIPhs Parameter ClkPhs H-Pos V-Pos 4/4 Setting range — –100 to 100 –100 to 100

Default value — 0 0

Defalt, Preset, User

SQ, EC, LB 1 to 5 1 to 5

Defalt, Preset,

User

Dig, Ana

Defalt, Preset,

User

Normal, DbyD, UC

On and Off

Fit-V, Fit-H, FULL Black, White, Init

On and Off

30 to +30

173

8. Setting menu table

INPUT INPUT XX*

Sub menu Third menu Parameter 1 Parameter 2 Parameter 3

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

(Csit)

* A1, A2, B1 or

B2 is displayed for X. (This sub menu is available when the AV-HS04M6 option board has been connected.)

FS Parameter FS Mode ↓ AnaGain 1/5 Setting range On, Off

Default value On Normal 0 Freeze Parameter Select Freeze ↓ 2/5 Setting range Frame, Field Toggling between

Default value Frame Off Name Parameter Type ↓ Name 3/5 Setting range

Default value Defalt UpConv1 Parameter Scale ↓ MovDet ↓ Sharp ↓ 4/5 Setting range SQ, EC, LB 1 to 5 1 to 5

Default value SQ 3 3 Setting Parameter Chroma Ped Hue 5/5 Setting range –8 to +7 –100 to +100 −30 to +30

Default value 0 0 0

Defalt, Preset, User

Normal, DbyD, UC

On and Off

–30 to +30

(Enabled when the system format is set to 1080/59.94i, 720/59.94p and 480/59.94i.)

174

8. Setting menu table

OUTPUT OUTPUTYY*

Sub menu Third menu Parameter 1 Parameter 2 Parameter 3

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

(SDI)

* OUT1 to 4, A1,

A2, B1 or B2 is displayed for Y. (A1, A2, B1 or B2 are available when the AV-HS04M7 option board has been connected.)

OUTPUTYY* (ANA)

* A1, A2, B1 or B2

is displayed for Y. (This sub menu is available when the AV-HS04M4 option board has been connected.)

OUTPUTYY* (DVI-D)

* OUT5 or OUT6

is displayed for Y.

OUTPUTYY* (DVI-I)

* A1, A2, B1 or B2

is displayed for Y. (This sub menu is available when the AV-HS04M5 option board has been connected.)

Asign Parameter Source Mode ↓ 1/2 Setting range PGM, PVW, CLN,

AUX1 to 4, MV1 to 2, KeyOut

Default value — Normal DownCnv Parameter Scale ↓ Delay ↓ Sharp ↓ 2/2

(This sub menu is available when the AV-HS04M7 option board has been connected.)

Asign Parameter Source 1/1 Setting range PGM, PVW, CLN,

Asign Parameter Source MovDet ↓ 1/2 Setting range PGM, PVW, CLN,

DVIOut Parameter Size ↓ Scale ↓ 2/2 Setting range

Asign Parameter Source 1/2 Setting range PGM, PVW, CLN,

DVIOut Parameter Mode ↓ Size ↓ Scale ↓ 2/2 Setting range

Setting range

Default value SQ 90H 3

Default value —

Default value — 3

Default value Auto Fit-V

Default value —

Default value Dig Auto Fit-V

SQ, EC, LB 90H(75H), 1F 1 to 5

AUX1 to 4, MV1 to 2, KeyOut

Dig, Ana Auto, XGA,

Normal, DC

1 to 5

Auto, XGA, WXGA, SXGA, WSXGA+, UXGA, WUXGA, 1080P

WXGA, SXGA, WSXGA+, UXGA, WUXGA

Fit-V, Fit-H, Full

175

8. Setting menu table

CONFIG CONFIG 1 Parameter BusMode LCD-BL MENUDLG

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

Operate Setting range A/B,

Default value PGM/PST On On

CONFIG 2 Parameter LEDMode SHOT MEM Setting range AW, AV

Default value AV

CONFIG 3 Parameter ENBL SYSCONF Setting range Enable, Disable

Default value Enable

CONFIG 4 Parameter Port Assign GPIEN GPIM-In Setting range Port1 to 8 AUTO, CUT,

Default value — NoAsign Enable

CONFIG 5 Parameter Port Assign GPIEN GPIM-Out Setting range Port1 to 31 AUTO, CUT,

Default value — NoAsign Disable

Parameter 1 Parameter 2 Parameter 3 Parameter 4

PGM/PST

(When Disable is selected, the SYSTEM menu is locked.)

On, Off, 60, 120, 180

DSK1, DSK2, PinP1, PinP2, FTB, BGDAUTO, BGDCUT, KEYAUTO, KEYCUT, RTlyDBL, GTlyDBL, NoAsign

DSK1ON, DSK2ON, PinP1ON, PinP2ON, FTBON, BGDAUTO, BGDCUT, KEYAUTO, KEYCUT, DSK1TRN, DSK2TRN, PinP1TR, PinP2TR, FTBTRN, KEYON, KEYTRN, R-Tly1 to 20, G-Tly1 to 20, NoAsign

On, Off

Enable, Disable

176

8. Setting menu table

CONFIG CONFIG 6 Parameter Port Assign GPIEN

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

GPIP-In Setting range Port1 to 8 AUTO, CUT,

Default value — NoAsign Disable

CONFIG 7 Parameter Port Assign GPIEN GPIP-Out Setting range Port1 to 8 AUTO, CUT,

Default value — NoAsign Disable

Parameter 1 Parameter 2 Parameter 3 Parameter 4

Enable, Disable DSK1, DSK2, PinP1, PinP2, FTB, BGDAUTO, BGDCUT, KEYAUTO, KEYCUT, RTlyDBL, GTlyDBL, NoAsign

Enable, Disable DSK1ON, DSK2ON, PinP1ON, PinP2ON, FTBON, BGDAUTO, BGDCUT, KEYAUTO, KEYCUT, DSK1TRN, DSK2TRN, PinP1TR, PinP2TR, FTBTRN, KEYON, KEYTRN, R-Tly1 to 20, G-Tly1 to 20, NoAsign

177

8. Setting menu table

CONFIG CONFIG 8 Parameter USER1 USER2 USER3

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

Button1 Setting range PinPPVW,

Default value PinPPVW DSK1PVW DSK2PVW

CONFIG 9 Parameter USER4 USER5 USER6 Button2 Setting range PinPPVW,

Default value NoAsign NoAsign NoAsign

CONFIG10 Parameter OSD Select OSD Setting range On, Off PVW, MV1, MV2,

Default value On PVW

CONFIG11 Parameter Fill Source ↓ KSAsign Setting range IN1 to 16, IN-A1,

Default value — (Same as Fill)

CONFIG12 Parameter CLN CLNAsign Setting range KEY, DSK1, DSK2

Default value KEY

Parameter 1 Parameter 2 Parameter 3 Parameter 4

DSK1PVW, DSK2PVW, Edit-EN, COM-EN, GPIMIEN, GPIMOEN, GPIPIEN, GPIPOEN, OSD, StrFM1, StrFM2, StrFM3, StrFM4, SHIFT, AUXTRAN, NoAsign

IN-A2, IN-B1, IN-B2, CBGD, CBAR, FMEM1 to 4

PinPPVW, DSK1PVW, DSK2PVW, Edit-EN, COM-EN, GPIMIEN, GPIMOEN, GPIPIEN, GPIPOEN, OSD, StrFM1, StrFM2, StrFM3, StrFM4, SHIFT, AUXTRAN, NoAsign

MV1+MV2

IN1 to 16, IN-A1, IN-A2, IN-B1, IN-B2, CBGD, CBAR, FMEM1 to 4, NoAsign

PinPPVW, DSK1PVW, DSK2PVW, Edit-EN, COM-EN, GPIMIEN, GPIMOEN, GPIPIEN, GPIPOEN, OSD, StrFM1, StrFM2, StrFM3, StrFM4, SHIFT, AUXTRAN, NoAsign

178

8. Setting menu table

SYSTEM

(When locked)

SYSTEM

(When unlocked)

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

(Message) Parameter

Display only

SYS 1 Parameter Mode ↓ HiRes ↓ 16:9SQ Format Setting range

Default value 1080/59.94i Off Off

SYS 2 Parameter System H-Phase V-Phase OutPhs Setting range 0H, 1H –1320 to +1319 –100 to +100

Default value 1H 0 0

SYS 3 Parameter Sync ↓ BBSetup GenLock Ref Setting range

Default value BBST 7.5IRE —

SYS 4 Parameter VAnci E.Audio Anci Setting range On, Off On, Off

Default value Off Off

SYS 5 Parameter Power Fan Alarm Setting range Alarm, NoAlarm Alarm, NoAlarm

Default value Alarm Alarm

SYS 6 Parameter Init ↓ F Init ↓ Initial Setting range

Default value

SYS 7 Parameter IP Address Save ↓ NetWork1 Setting range 0 to 255 0 to 255 0 to 255 0 to 255

Default value 192 168 0 10

SYS 8 Parameter Subnet Mask Save ↓ NetWork2 Setting range 0 to 255 0 to 255 0 to 255 0 to 255

Default value 255 255 255 0

SYS 9 Parameter MAC Address NetWork3 Display only SYS 10 Parameter Year Month Date Set ↓ Date Setting range 2000 to 2099 1 to 12 1 to 31 —

Default value — — — —

SYS 11 Parameter Hour Minute Second Set ↓ Time Setting range 0 to 23 0 to 59 0 to 59 —

Default value — — — —

Parameter 1 Parameter 2 Parameter 3 Parameter 4

The SYSTEM menu is locked.

1080/59.94i, 1080/50i, 1080/24psf, 1080/23.98psf, 720/59.94p, 720/50p, 480/59.94i, 576/50i

BBST, BBAD, TRI, INT

0IRE, 7.5IRE Locked, UnLock

On, Off (Selection enabled when SD format is used)

On, Off

(Selection enabled

when SD format is

used)

179

8. Setting menu table

SYSTEM

(When unlocked)

Sub menu

Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.

SYS 12 Parameter Select Version SysVer MainVer Setting range MFSoft, PnlSoft,

Default value MFSoft

SYS 13 Parameter Select Board Version OptVer Setting range SLOTA, SLOTB SDI-IN, Ana-IN,

Default value SLOTA

Parameter 1 Parameter 2 Parameter 3 Parameter 4

Version number Version number

PnlFPGA, CntFPGA, In1FPGA, In2FPGA, M/EFPGA, OutFPGA

Version number DVI-IN, DVID-IN, SDI-OUT, Ana-OUT, D/A-OUT, Csit-IN, None

180

Panasonic AV-HS450 Menu Information

Specifications and Main Features

Frequently Asked Questions

User Manual