ICs for Audio Common Use
AN7190NK, AN7190NZ
Dual 20 W BTL power amplifier
■ Overview
The AN7190NK and the AN7190NZ are audio power
ICs developed for the sound output of car audio (dual 20
W). It is incorporating various protective circuits to protect the IC from destruction by GND-open, short circuit
to GND and power supply surge which are the important
subject of power IC protection, so the IC will largely
contribute to a high reliability design of equipment. Also,
it is incorporating a perfect muting circuit which is free
from shock noise, so that a shock noise design under the
set transient condition can be made easily using together
with its standby function.
■ Features
• BTL 20 W × 2-channel (4 Ω), GV = 40 dB
• Built-in various protection circuits (thermal protection,
short circuit to V
short circuit to V
overvoltage and supply surge, and ASO, etc.)
Especially, the supply surge breakdown voltage is 100
V or more.
GND open breakdown voltage is 16 V or more.
• Built-in standby function
Free from shock noise at STB on/off.
• Built-in muting function
Free from shock noise at mute-on/off.
Adapting attenuator method so that abnormal sound due
to waveform deformation is not generated .
Attack time, recovery time are 50 ms or less.
• Reduction in external components
It eliminates the need for NF and BS electrolytic capacitors.
Muting function is not required, and power supply choke
coil is unnecessary.
• Provided with beep sound input pin
• 2 Ω load guaranteed
and short circuit to GND, VCC-open
CC
, GND-open short circuit to GND,
CC
AN7190NK Unit : mm
28.0±0.3
29.75±0.3
(10.0)
20.0±0.3
(10.0)
(0.6)
1.2+0.1
φ3.6
R1.8
11.3±0.3
7.7±0.3
(12.5)
(14.1)
(17.63)
(18.7)
(21.5)
(1.2)
R0.7
16
1
0.10
+0.15
-
0.6
(0.889)
(0.889)
1.788
0.05
+0.10
-
0.25
(1.1)
1.45±0.151.80±0.15
(2.54)
29.6±0.3
3.5±0.2
HZIP016-P-0665A
AN7190NZ Unit : mm
0.50
+0.20
–0.10
4.00±0.20
1.50±0.10
10.0±0.30
(0.61)
(1.80) (1.95)
(2.54)
0.25
13.25±0.30
15.65±0.50
2.40±0.50
R0.55
+0.15
–0.05
3.25±0.10
18.95±0.50
18.00±0.30
13.50±0.30
φ3.60±0.10
115
1.27
19.00±0.30
19.30±0.30
HZIP015-P-0745A
■ Applications
• Car audio
1
AN7190NK, AN7190NZ ICs for Audio Common Use
■ Block Diagram
CC
V
1
Ch.1 GND Ch.2 GND
3
Ref.
12
14
Ch.1 out (−)
Ch.1 out (+)
4
2
8
10
Beep in
GND (sub)
■ Pin Descriptions
Pin No. Description
1 Power supply
2 Ch.1 output (+)
3 Grounding (output ch.1)
4 Ch.1 output (−)
5 Standby
6 Ch.1 input
7 Muting
8 Grounding (sub)
Att.
Att.
6
Ch.1 in
Protection cct.
Att.con.
5
7
Standby
Mute
Att.
Att.
11
Ch.2 in
Pin No. Description
9 Grounding (input)
10 Beep sound input
11 Ch.2 input
12 Ripple filter
13 Ch.2 output (−)
14 Grounding (output ch.2)
15 Ch.2 output (+)
13
15
9
GND (input)
Ch.2 out (−)
Ch.2 out (+)
■ Absolute Maximum Ratings
Parameter Symbol Rating Unit
2
Supply voltage
Peak supply voltage
Supply current I
Power dissipation
Operating ambient temperature
Storage temperature
Note)*1: Ta = 25°C except operating ambient temperature and storage temperature.
2 : Without signal
*
3 : Time = 0.2 s
*
4: Ta = 85°C
*
2
*
3
*
4
*
V
CC
V
surge
CC
P
AN7190NK 32.5 W
D
25 V
80 V
9.0 A
AN7190NZ 59
1
*
T
opr
1
*
T
stg
− 30 to + 85 °C
− 55 to + 150 °C