Panasonic FP-e, AFPE224300, AFPE224302, AFPE224305, AFPE214325 Specification Sheet

Matsushita

Programmable Controller FP-e

48 mm

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

2

FP-e Series

The universal compact PLC

One programming software for all PLC types

Programming software and cables are
common for all FP Series PLCs, so that
any program created for the FP Series
can be used by the FP-e as well.
FPWIN Pro Ver.5 and FPWIN GR
from Ver.2.3 offer a dialog to configure
the screen display of the FP-e easily.
You can check the result of the
configuration directly with the display
in the dialog.

● 3-color Display

Simple characters and numerical values
can be displayed. Simple messages as
well as timer/counter settings and
elapsed values can also be displayed.

● Built-in operation switch

Setting values can be changed. The
operation switch can also be used as an
input.

● Panel mounted type

(in accordance with IP66,
IEC standard)

To match panel design,
a black faceplate is
available.

● Matches FP0 intelligence

(equivalent to FP0-C14)

● Compact

Panel mountable, little space is taken up
on the control panel. The size is only 48 ×
48 × 70 mm (behind faceplate).

Do this, do that, do everything.

Same programming tools used as with the FP Series

Timer

Counter

Time switch

Hour meter

Temperature
controller

Programmable

controller

70

48

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]

∗Compatible with MODBUS, it can be used as a slave.

Up to 32
controllers

RS485

Personal Computer

FP-e FP-e FP-e

RS232C

Commercially
available adaptor

Image Processing

Device, etc.

Tool port COM. port

● Pulse output function

The unit comes equipped with 2 channels for pulse
output of up to 10 kHz pulses.
Since these two channels can be separately controlled,
the FP-e is also suitable for 2-axis independent
positioning.

● Up to 99 computer link stations are possible with

RS485.

(RS485 type)

Up to 32 computer link stations are possible using a
C-NET adaptor and up to 99 are possible using a
commercially available adaptor. You can easily
monitor operation status or perform control.

● With RS232C, communication with up to two ports

is possible.

(RS232C type)

Y0
Y2

Motor

driver 1

Pulse output

CW/CCW output

Y1
Y3

Motor

driver 2

Stepping motor
Servo motor

Pulse output

CW/CCW output

● High-speed counter function

In single phase, the 4-channel total is 10 kHz, and in 2­phase the 2-channel total is 2 kHz total speed, making
the FP-e suitable for inverter control, etc.

(One half for the type with thermocouple input.)

Feeder roller

Lead wire

and tape

Cutter

Encoder

Motor

START/STOP

signal

Inverter

Cutter blade
control signal

Input encoder
output into the
high-speed counter

Equipped with RS485 and RS232C interfaces

● Two-point K-type thermocouple (-30 to 300°C)

connection is possible.

(equipped with thermocouple input)

Can be used in place of a temperature controller or
used to control them.

● PID instruction function

High-performance temperature control can be achieved
with PID instruction.

Can even handle temperature control

Equipped with high-speed counter for support of 2-axis independent positioning

Personal Computer

FP-e

RS232C RS232C

Computer link

RS485

FP-e

Temperature

controller, etc

Temperature

controller, etc

FP-e

FCT2

FCT1

D6
D7

D3

D8

IN4

D4

D2

IN7

IN3

D5

COM
FLA
COM
RDY
ERR
REN
STR
OVF
D1

IN5
IN6

IN8

IN2

COM
STA
COM

ACK
TYP
IN1

-

+

COM.2

COM.1

CF

POWER
ERROR
READY
TOOL

KEYPAD

COM.1

COM.2

CAMERA1

CAMERA2

MONITOR

As

a controller for

temperature

controller

As

temperature

controller

KT4

OFF

MODE

OUT

TX/RX

PV

SV

SV1

SV2

AT

EVT

A1

OUT2

OUT1

KT4

OFF

MODE

OUT

TX/RX

PV

SV

SV1

SV2

AT

EVT

A1

OUT2

OUT1

Y0

PID instruction

A0

Thermocouple input

Heater

3

Optimised for a wide range of applications

FP-e Series

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]