Panasonic 9TGCF S91 Users Manual

OPERATING INSTRUCTIONS

For further information about the computer, you can refer to the on-screen manual.

To access the on-screen manual Î page 16 “On-screen Manual”

For your technical support office, refer to “LIMITED WARRANTY.”

Personal Computer

Model No. CF-S9 series

Contents
Getting Started
Introduction.................................................	2
Read Me First ..............................................	3
(Precautions)
Description of Parts .....................................	11
First-time Operation .....................................	13
Useful Information
On-screen Manual.......................................	16
Handling and Maintenance .............................	17
Reinstalling Software....................................	20

Troubleshooting
Troubleshooting (Basic) ................................	22

Appendix
LIMITED USE LICENSE AGREEMENT ..............	25
Specifications ............................................	27
LIMITED WARRANTY ..................................	30

Troubleshooting Useful Information Getting Started

Appendix

Please read these instructions carefully before using this product, and save this manual for future use.

Introduction

Appendix Troubleshooting Useful Information Getting Started

Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully.

Terms and illustrations in these instructions

CAUTION				:	Conditions that may result in minor or moderate injury.
		:			Useful and helpful information.
NOTE
		:			Press [Enter] key.
Enter
	+ F5 :				Press and hold [Fn] key, and then press [F5] key.
Fn
	(Start) - [All Programs]: Click					(Start), and then click [All Programs]. You may need to double-click in some
					cases.
Î :					Page in these Operating Instructions.
Î			:		Reference to the on-screen manuals of the computer.

zSome illustrations are simplified to help your understanding and may look different from the actual unit.

zIf you do not log on as an administrator, you cannot use some functions or cannot display some screens.

zRefer for the latest information about optional products to the catalogs, etc.

zIn these instructions, the names and terms are referred as follows.

•“Genuine Windows® 7 Professional (32-bit)” and “Genuine Windows® 7 Professional (64-bit)” as “Windows” or “Windows 7”

•“WinDVD™ 8 (OEM Version)” as “WinDVD”

zThe display modes are referred as follows. ( ) indicates the terms in [Intel® Graphics and Media Control Panel] screen. To display the screen, right-click the desktop and click [Graphics Properties].

•Internal LCD (Built-in Display): The computer’s display

•External display: External display

•Simultaneous display (Clone Displays): The same screen is displayed on the internal LCD and the external display.

•Extended Desktop: The extended working area across the internal LCD and the external display.

Disclaimer

Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.

Trademarks

Microsoft®, Windows® and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries.

Intel, Core and PROSet are either registered trademarks or trademarks of Intel Corporation.

SDHC Logo is a trademark of SD-3C, LLC.

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation.

Corel, InterVideo, WinDVD™, the InterVideo logo and the Corel logo are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries in Canada, the United States and/or other countries.

Sonic and Roxio are trademarks or registered trademarks of Sonic in the United States and/or other countries.

Computrace® is a registered trademark of Absolute® Software Corp.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies.

Read Me First

Models for U.S.A.

	Federal Communications Commission Radio Fre-	FCC requires this product to be used indoors for the
	quency Interference Statement	frequency range 5.15 to 5.25 GHz to reduce the poten-
	Note: This equipment has been tested and found to com-	tial for harmful interference to co-channel Mobile Satel-
	Note: This equipment has been tested and found to com-	lite systems. High power radars are allocated as
	ply with the limits for a Class B digital device, pursuant to	primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85
	Part 15 of the FCC Rules. These limits are designed to	GHz bands. These radar stations can cause interfer-
	provide reasonable protection against harmful interfer-	ence with and /or damage this product.
	ence in a residential installation. This equipment gener-	25-M-W-3
	ates, uses and can radiate radio frequency energy and, if	Responsible Party: Panasonic Corporation of North America
	not installed and used in accordance with the instructions,	One Panasonic Way
	may cause harmful interference to radio communications.	Secaucus, NJ 07094
	However, there is no guarantee that interference will not	Tel No:1-800-LAPTOP5 (1-800-527-8675)
	occur in a particular installation. If this equipment does	6-M-1
	cause harmful interference to radio or television recep-	FCC Regulation Notice for modem
	tion, which can be determined by turning the equipment	FCC Regulation Notice for modem
	tion, which can be determined by turning the equipment	This equipment contains a FCC approved modem.
	off and on, the user is encouraged to try to correct the	This equipment contains a FCC approved modem.
	off and on, the user is encouraged to try to correct the
	interference by one or more of the following measures:
	z Reorient or relocate the receiving antenna.
	z Increase the separation between the equipment and
	receiver.	1. This equipment complies with CFR47 Part 68 rules.
	z Connect the equipment into an outlet on a circuit differ-	1. This equipment complies with CFR47 Part 68 rules.
	z Connect the equipment into an outlet on a circuit differ-	On the computer is a label that contains, among other
	ent from that to which the receiver is connected.	On the computer is a label that contains, among other
	ent from that to which the receiver is connected.	information, the FCC registration number and ringer
	z Consult the Panasonic Service Center or an experi-	information, the FCC registration number and ringer
	z Consult the Panasonic Service Center or an experi-	equivalence number (REN) for this equipment. If
	enced radio/TV technician for help.	equivalence number (REN) for this equipment. If
	enced radio/TV technician for help.	required, this information must be provided to the tele-
		required, this information must be provided to the tele-
	Warning	phone company.
	To assure continued compliance, use only shielded inter-	2. An FCC compliant telephone cord and modular plug is
	face cables when connecting to a computer or peripheral.	provided with this equipment. This equipment is
	Also, any changes or modifications not expressly	designed to be connected to the telephone network or
	Also, any changes or modifications not expressly	premises wiring using a compatible modular jack
	approved by the party responsible for compliance could	premises wiring using a compatible modular jack
	approved by the party responsible for compliance could	which is Part 68 compliant. See Installation Instruc-
	void the user’s authority to operate this equipment.	which is Part 68 compliant. See Installation Instruc-
	void the user’s authority to operate this equipment.	tions for details.
		tions for details.
	This device complies with Part 15 of the FCC Rules.	3. The REN is used to determine the quantity of devices
	Operation is subject to the following two conditions:	which may be connected to the telephone line. Exces-
	(1)This device may not cause harmful interference, and	sive RENs on the telephone line may result in the
	(2)This device must accept any interference received, includ-	devices not ringing in response to an incoming call. In
	ing interference that may cause undesired operation.	most, but not all area, the sum of RENs should not
	FCC RF Exposure Warning:	exceed five (5.0). To be certain of the number of
	FCC RF Exposure Warning:	devices that may be connected to a line, as determined
	z This equipment is provided with PC Card slot that could	by the total RENs, contact the local telephone company.
	be used with wireless transmitters, which will be specif-	4. If your telephone equipment cause harm to the tele-
	ically recommended when they become available.	phone network, the telephone company will notify you
	Other third-party wireless transmitters have not been	in advice that temporary discontinuance of service
	RF exposure evaluated for use with this computer and	may be required. But if advice notice isn’t practical, the
	may not comply with FCC RF exposure requirements.	telephone company will notify the customer as soon as
	<Only for model with wireless LAN/wireless WAN/	possible. Also, you will be advised of your right to file a
	Bluetooth>	complaint with the FCC if you believe it is necessary.
	Bluetooth>	5. The telephone company may take changes in its facili-
	z This equipment complies with FCC radiation exposure	5. The telephone company may take changes in its facili-
	z This equipment complies with FCC radiation exposure	ties, equipment, operations or procedures that could
	limits set forth for an uncontrolled environment.	ties, equipment, operations or procedures that could
	limits set forth for an uncontrolled environment.	affect the operation of the equipment. If this happens
	z This equipment has been approved for mobile opera-	affect the operation of the equipment. If this happens
	z This equipment has been approved for mobile opera-	the telephone company will provide advance notice in
	tion, and unless otherwise advised in separate supple-	the telephone company will provide advance notice in
	tion, and unless otherwise advised in separate supple-	order for you to make necessary modifications to
	mental instructions for individual wireless	order for you to make necessary modifications to
	mental instructions for individual wireless	maintain uninterrupted service.
	transmitter(s), requires minimum 20 cm spacing be	maintain uninterrupted service.
	transmitter(s), requires minimum 20 cm spacing be	6. If trouble is experienced with this equipment, for repair
	provided between antenna(s) and all person’s body
	provided between antenna(s) and all person’s body	or warranty information, please contact Panasonic
	(excluding extremities of hands, wrist and feet) during	or warranty information, please contact Panasonic
	(excluding extremities of hands, wrist and feet) during	Corporation of North America at DIAL TOLL FREE 1-
	wireless modes of operation.	Corporation of North America at DIAL TOLL FREE 1-
	wireless modes of operation.	800-LAPTOP5 (1-800-527-8675). If the equipment is
	z This equipment may not be co-located or operated	causing harm to the telephone network, the telephone
	with any other antenna or transmitter.	company may request that you disconnect the equip-
	25-M-6	ment until the problem is resolved.
	<Only for model with wireless WAN>	7. There are no user serviceable parts contained in this
	z This product is restricted to indoor use due to its oper-	equipment.
	ation in the 5.15 to 5.25 GHz frequency range.

Appendix Troubleshooting Useful Information Getting Started

Read Me First

Appendix Troubleshooting Useful Information Getting Started

8.This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.

9.The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In

order to program this information into your fax software, you should refer to the manual of the Fax software being used.

10.According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges,

typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem.

“Caution : To reduce the risk of fire, use only No.26 AWG or larger (e.g., 24 AWG) UL listed or CSA certified telecommunication line cord”

“ATTENTION : Pour reduire le risque d’fincendie, utiliser uniquement des conducteurs de telecommunications 26 AWG ou de section superieure (p.ex. 24 AWG) UL énumérés ou CSA certifié.”

16-M-1

This product contains a Coin Cell Lithium Battery which contains Perchlorate Materialspecial handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1

Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating Wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions.

When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating Wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating Wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating Wireless WAN modem away from the pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating Wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow instruction provided by the airline.

Do not operate Personal Computer or Handheld Computer incorporating Wireless WAN modem in the

presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel

depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard.

Your Personal Computer or Handheld Computer incorporating Wireless WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always

switch off Personal Computer or Handheld Computer incorporating Wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or danger.

Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating Wireless WAN modem while driving a vehicle. Do not place the computer with Wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or

secure stowage area while driving. Do not place the computer with Wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inflate with great force and if the computer with Wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle.

IMPORTANT!

Personal Computer or Handheld Computer incorporating Wireless WAN modem operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating Wireless WAN modem must be switched on and in a coverage area with adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorporating Wireless WAN modem.

27-1-2

Models for Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved modem unit.

The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.” “NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences techniques relatives au

matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coordonnées par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de réparations ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales. Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un service d’inspection des installations électriques, ou à un électricien, selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La terminaison d’une interface téléphonique peut consister en une combinaison de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de touts les dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Canadian ICES-003

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

7-M-2

Industry Canada

This product complies with RSS-210 Industry Canada. Operation is subject to the following two conditions;

(1)this device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device.

Appendix Troubleshooting Useful Information Getting Started

Read Me First

Appendix Troubleshooting Useful Information Getting Started

Industrie Canada

Cet equipement est conforme a la norme CNR-210 d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1)ce dispositif ne peut produire de brouillage, et

(2)ce dispositif doit accepter le brouillage, y compris le brouillage pouvant entrainer le fonctionnement non desire de l’appareil.

30-Ca-1-1

This product (local network devices) for the band 51505250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 56505850 MHz and these radars could cause interference and/or damage to LELAN devices.

<Ne s’applique qu’aux modeles avec technologie LAN sans fil> Cet appareil (pour reseaux locaux radioelectriques) dans les bandes de frequences 5150-5250 MHz est reserve a une utilization a l’interieur afi n de reduire le risque d’nterference avec les systemes satellites mobiles bicanaux. Les radars forte puissance sont designes comme etant les premiers utilisateurs (c’est-a-dire qu’ils ont la priorite)

des bandes de frequences 5250-5350 MHz et 56505850 MHz. Ces stations radars peuvent provoquer des interferences et/ou des dommages a ce peripherique.

30-Ca-2-1

zThis equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

zThis equipment has been approved for mobile operation, and unless otherwise advised separate supplemental instructions for individual wireless transmitter(s), requires minimum 20 cm spacing be provided between antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

zCet équipement est conforme aux limites d’exposition aux rayonnements d’Industrie Canada établies pour un environnement non contrôlé.

zCet équipement a été approuvé à des fins d’opération mobile et, sauf indication contraire, dans une notice supplémentaire concernant les émetteurs sans fil individuels, doit être utilisé en veillant qu’il y ait une distance d’au moins 20 cm entre son(ses) antenne(s) et le corps de l’utilisateur (sauf les extrémités : mains, poignets et pieds) dans les modes d’opération sans fil.

Models for Europe

Declaration of Conformity (DoC)

“Hereby, Panasonic declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our web address: http://www.doc.panasonic.de

Authorised Representative:

Panasonic Testing Centre Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Network connection of Wired Modem.

The terminal equipment is intended for connection to the following public network; In all the countries of European Economical Area and Turkey;

- Public Switched Telephony Networks

Technical Features of Wired Modem.

The terminal equipment includes the following features;

-DTMF dialing

-Maximum bitrate receiving mode: 56 kbit/s

-Maximum bitrate sending mode: 33.6 kbit/s

18-E-1

Important Safety Instructions / Importantes Mesures De Sécurité

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk

of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

19-E-1

Certaines mesures de sécurité doivent être prises pendant l’utilisation de matérial téléphonique afin de réduire les risques d’incendie, de choc électrique et de blessures. En voici quelquesunes:

1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver, dans un sous-sol humide ou près d’une piscine.

2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans fil) pendant un orage électrique. Ceci peut présenter un risque de choc électrique causé par la foudre.

3.Ne pas utiliser l’appareil téléphonique pour signaler une fuite de gaz s’il est situé près de la fuite.

4.Utiliser seulement le cordon d’alimentation et le type de piles indiqués dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux règlements pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

19-F-1

Information to the User / Informations destinées aux utilisateurs

This product and your Health

This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

zUsing this product on board of airplanes, or

zIn any other environment where the risk of interference

to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.

26-M-1

Lithium Battery / Pile au lithium

Ce produit et votre santé

Ce produit, comme tout autre appareil radio, émet de l’énergie radioélectrique. Toutefois, la quantité d’énergie émise par ce produit est beaucoup moins importante que l’énergie radioélectrique émise par des appareils sans fil tels que les téléphones portables. L’utilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opère dans les limites des directives concernant les normes et les recommandations de sécurité sur les fréquences radio. Ces normes et recommandations reflètent le consensus de la communauté scientifique et résultent de délibérations de jurys et comités de scientifiques qui examinent et interprètent continuellement les nouveautés de la vaste littérature sur les recherches effectuées. Dans certaines situations ou environnements, l’utilisation de ce produit peut être restreinte par le propriétaire du bâtiment ou par les représentants responsables de l’organisation. Ces situations peuvent être les suivantes par exemple :

zA bord d’un avion, ou

zDans tout autre environnement où les risques d’interférence sur d’autres appareils ou services sont perçus

ou identifiables comme dangereux.

Si vous n’êtes pas sûr de la réglementation applicable à l’utilisation d’appareils sans fil dans une organisation ou un environnement spécifique, (par exemple dans un aéroport) nous vous invitons à demander l’autorisation d’utiliser ce produit avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour toute interférence radio ou télévision causée par des modifications non autorisées apportées à ce produit. La correction d’interférences causées par de telles modifications non autorisées sera la seule responsabilité de son utilisateur. Nousmêmes, les revendeurs officiels et les distributeurs ne sommes pas responsable de tout dégât ou de toute violation des règlements de l’État pouvant découler du non-respect de ces directives.

26-F-1

Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning!

A risk of explosion from incorrect installation or misapplication may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et l’heure. La pile ne doit être remplacée que par un technicien qualifié.

Danger !

Risque d’explosion en cas de non respect de cette mise en garde!

15-F-1

Appendix Troubleshooting Useful Information Getting Started

Read Me First

Appendix Troubleshooting Useful Information Getting Started

CD/DVD Drive Caution

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

12-E-1

The following label is put on the bottom of the computer.

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIATIONS DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOIMÊME.

CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.

12-F-1

L’étiquette suivante se trouve en-dessous de l’ordinateur.

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

53-M-1

Precautions

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1, MEDICAL DEVICES OR ACCESSORIES*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/ DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

*2 As defined by the European Medical Device Directive (MDD) 93/42/EEC.

Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g. Flammability/Smoke/ Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards and medical equipment standards that differ from the specifications of our COTS (Commercial-Off-The-Shelf) products.

If a Malfunction or Trouble Occurs, Immediately Stop Use

If a Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack

•This product is damaged

•Foreign object inside this product

•Smoke emitted

•Unusual smell emitted

•Unusually hot

Continuing to use this product while any of the above conditions are present may result in fire or electric shock.

•If a malfunction or trouble occurs, immediately turn the power off and unplug the AC plug, and then remove the battery pack. Then contact your technical support office for repair.

Do Not Touch This Product and Cable When It Starts Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet

Otherwise, a fire due to overheating may result. Connecting to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/ charger to an AC outlet specifically approved for such use.

Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly.

Continuing to use a damaged cord may result in fire, short circuit, or electric shock.

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fire.

•Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, fire due to overheating or electric shock may result.

• Do not use a damaged plug or loose AC outlet.

Do Not Place Containers of Liquid or Metal Objects on Top of This Product

If water or other liquid spills, or if paper clips, coins, or foreign matter get inside this product, fire or electric shock may result.

•If water spills in the keyboard, refer to page 19. If other foreign matter has found its way inside, immediately turn the power off and unplug the AC plug and remove the battery pack. Then contact your technical support office.

Do Not Disassemble This Product

The high-voltage areas inside may give you an electric shock, or foreign matter may enter and result in a fire.

Keep SD Memory Cards Away from Infants and Small Children

Accidental swallowing will result in bodily injury.

•In the event of accidental swallowing, see a doctor immediately.

Do Not Place This Product on Unstable Surfaces

If balance is lost, this product may fall over or drop, resulting in an injury.

Avoid Stacking

If balance is lost, this product may fall over or drop, resulting in an injury.

Do Not Keep This Product Wherever There is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc.

Otherwise, possibly resulting in fire or electric shock.

Do Not Leave This Product in High Temperature Environment for a Long Period of Time

Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks.

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a fire.

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a fire or electric shock.

Do Not Move This Product While the AC Plug Is Connected

The AC cord may be damaged, resulting in fire or electric shock.

•If the AC cord is damaged, unplug the AC plug immediately.

Use Only the Specified AC Adaptor With This Product

Using an AC adaptor other than the one supplied (supplied with the unit or one sold separately as an accessory) may result in a fire.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fire.

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detrimental health effects on the eyes or hands.

Do Not Look into the CD/DVD Drive

Looking directly at the internal laser light source may result in damage to eyesight.

Do Not Use Discs That Are Cracked or Deformed

Because the discs rotate at high speeds, damaged discs may break apart causing injury.

•Discs that are not round and discs that have been repaired using adhesives are similarly dangerous, and so should not be used.

Do Not Turn the Volume Up to Loud When Using Headphones

Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise switches) of a company or business office, etc. or to a digital public phone or use in a country or area not supported by the computer may result in a fire or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, into the LAN Port

If the LAN port is connected to a network such as the ones listed below, a fire or electric shock may result.

•Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T

•Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-premise switches), digital public phones, etc.)

Do Not Use with Exposing the Skin to This Product for a Long Period of Time

Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn.

zDo not place the computer near a television or radio receiver.

zKeep the computer away from magnets. Data stored on the hard disk may be lost.

zThis computer is not intended for the display of images for use in medical diagnosis.

zThis computer is not intended for a use with connection of medical equipment for the purpose of medical diagnosis.

zPanasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product.

Appendix Troubleshooting Useful Information Getting Started

Read Me First

Appendix Troubleshooting Useful Information Getting Started

Precautions (Battery Pack)

Do Not Use with Any Other Product

The battery pack is rechargeable and was intended for the specified product. If it is used with a product other than the one for which it was designed, electrolyte leakage, generation of heat, ignition or rupture may result.

Do Not Charge the Battery Using Methods Other Than Those Specified

If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result.

Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat

Generation of heat, ignition or rupture may result.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example)

Electrolyte leakage, generation of heat, ignition or rupture may result.

Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Modify It

Electrolyte leakage, generation of heat, ignition or rupture may result.

•If this product is subjected to a strong impact, stop using it immediately.

Do Not Short the Positive (+) and Negative (-) Contacts

Generation of heat, ignition or rupture may result.

•Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.

Do Not Use This Product with a Battery Pack Other Than the One Specified

Use only the specified battery pack (CF-VZSU61U) with your product. Use of battery packs other than those manufactured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture).

When the Battery Pack Has Deteriorated, Replace It with a New One

Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture.

zDo not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.

zDo not expose the battery pack to water, or allow it to become wet.

zIf the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.

zThis computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% (when Economy Mode (ECO) is enabled: 75%) of capacity.

zThe battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.

zShould the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible.

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

58-E-1

NOTE

zThe battery pack may become warm during recharging or normal use. This is completely normal.

zRecharging will not commence if internal temperature of the battery pack is outside of the allowable temper-

ature range (0 °C to 55 °C {32 °F to 131 °F}). (Î

Reference Manual “Battery Power”)

Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or below.)

zIn high-temperature environments, the battery takes longer to fully recharge. In low-temperature environments, the battery takes longer to fully recharge and the operating time is shorter. Only use the computer within the allowable temperature range.

zThe battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.

zWhen transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.

zAlways power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.

A lithium ion battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY for information on how to recycle this battery.

L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion.

Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.

48-M-1

Description of Parts

	A	H
		H
	B
	C
	D
	E	I
	F	I
	F	J
	G	K
		L
		M
		N
		O

A:Speakers

B:Function Key

ÎReference Manual “Key Combinations”

C:Keyboard

D:LED Indicator

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk and CD/DVD drive status

: SD/SDHC/SDXC Memory Card status ECO : Economy Mode (ECO) status

Î Reference Manual “Battery Power” : Battery status

Î Reference Manual “Battery Power”

E :Power Switch

Î page 14

Power Indicator

•Off: Power off/Hibernation

•Green: Power on

•Blinking green: Sleep/Standby

F : Wireless Switch

Switch the wireless devices to on (right side) or to off (left side).

Î Reference Manual “Disabling/Enabling Wireless Communication”

G :Fingerprint Reader

Î Reference Manual “Fingerprint Reader”

H:LCD

I: Security Lock

You can connect a Kensington cable. Refer to the instruction manual of the cable. The security lock and cable is a theft prevention device. Panasonic Corporation will bear no responsibility in the event of theft.

J : External Display Port

Connect the cable of external display.

K :USB Ports

Î Reference Manual “USB Devices”

L : PC Card Slot

ÎReference Manual “PC Card”

M :SD Memory Card Slot

Î Reference Manual “SD/SDHC Memory Card”*1

N :CD/DVD Drive Power/Open Switch

•Slide the switch to the right to open the disc cover.

•Slide the switch to the left to turn on/off the drive power.

CD/DVD Drive Indicator

•Off: Drive power is off or the disc cover is opened.

•Green: Drive power is on.

O :CD/DVD Drive

Î Reference Manual “CD/DVD Drive”

*1 SD/SDHC/SDXC Memory Cards are supported.

Appendix Troubleshooting Useful Information Getting Started

+ 25 hidden pages