|
|
® |
Personal Computer |
||
OPERATING INSTRUCTIONS |
||
Model No. CF-73 Series |
||
Contents |
|
|
Getting Started |
|
|
Read Me First.................................................. |
|
3 |
First-time Operation ...................................... |
|
11 |
2000 XP |
|
|
Reference Manual |
|
|
• Read Me First |
• LED Indicators |
|
• Key Combinations |
|
|
Operation |
|
|
Starting Up/Shutting Down ............................ |
16 |
|
Touch Pad ..................................................... |
|
19 |
Reference Manual ......................................... |
|
20 |
Reference Manual |
|
|
• Touch Pad |
• Port Replicator |
|
• Touchscreen* |
• Printer |
|
• Standby/Hibernation |
• External Display |
|
Functions |
• USB Devices |
|
• Security Measures |
• Modem |
|
• ComputingontheRoad |
• LAN |
|
• Battery Power |
• Wireless LAN |
|
• Multimedia Pocket |
• Hard Disk Drive |
|
• CD Drive |
• Setup Utility |
|
• PC Cards |
* Only for models with |
|
• RAM Module |
|
|
|
touchscreen |
|
Getting Started
Operation
[Additional Manual]
Reference Manual
This manual can be accessed on your computer. Refer to page 20 on how to access the Reference Manual.
Troubleshooting |
|
|
List of Error Codes ......................................... |
|
21 |
Dealing with Problems (Summary)....................... |
23 |
|
Reinstalling Software |
.................................... |
27 |
Reference Manual |
|
|
• Technical Information |
• List of Error Codes |
|
• DMI Viewer |
• Dealing with Problems |
|
|
(Advanced) |
|
Appendix |
|
|
LIMITED USE LICENSE AGREEMENT........ |
29 |
|
Hard Disk Data Erase Utility.......................... |
31 |
|
WinDVD™ ..................................................... |
|
32 |
Names and Functions of Parts ...................... |
34 |
|
Specifications ................................................ |
|
36 |
LIMITED WARRANTY ................................... |
38 |
Troubleshooting
Appendix
Please read these instructions carefully before using this product and save this manual for future use.
|
|
|
Customer’s Record |
|||
|
|
Model No. * |
|
|
Dealer’s Name |
|
|
|
|
|
|
|
|
|
Serial No. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or |
|
|
|
|
|
|
Code No. |
|
|
Dealer’s Address |
|
|
|
|
|
|
|
|
|
Date of Purchase |
|
|
|
|
|
|
|
|
|
|
|
|
StartedGetting
*For the Model No., insert the 12 digit number (for example, CF-73E3KVXDM) located on the bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer.
Illustrations and Terminology in this Manual
NOTE: |
|
NOTE provides a useful fact or helpful information. |
||||
CAUTION: |
CAUTION indicates a condition that may result in minor or moderate injury. |
|||||
WARNING: |
WARNING indicates a hazard that may result in moderate or serious injury. |
|||||
Windows 2000 |
: Information for Microsoft® Windows® 2000 Professional users. |
|||||
Windows XP |
: Information for Microsoft® Windows® XP Professional users. |
|||||
Enter |
: |
This illustration means to press the [Enter] key. |
||||
Fn + |
F5 : |
This illustration means to press and hold the [Fn] key, then press the [F5] key. |
||||
[Start] - [Run]: |
This illustration means to click [Start], then to click [Run]. |
|||||
|
|
|
|
|
|
(For some applications, you may need to double-click.) |
|
|
|
|
: |
|
Where to go for referred information. |
|
|
|
||||
|
|
|
|
|
: |
This illustration means to refer to the Reference Manual, which is available on your computer. |
|
|
|
|
|
||
|
|
|
|
|
|
Refer to page 20 on how to access this manual. |
Windows 2000 screens are used in this manual when no specific OS notes are required.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand.
Circular media such as DVD-ROM and CD-ROM are described as “discs”.
The following drives are described as “CD drive”. DVD-ROM drive, DVD-ROM & CD-R/RW drive
This manual covers two types of models, as distinguished by the type of display (models with touchscreen and models without touchscreen).
If the user has logged on without the administrator authority, some functions may not be executable, and some screens may not be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.
Confirm the latest information on optional products in catalogs, etc.
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein. ©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft, Windows, Windows NT and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries.
Intel, Pentium and SpeedStep are either registered trademarks or trademarks of Intel Corporation.
Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
WinDVD™ is a trademark of InterVideo, Inc.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.
2
Read Me First
For U.S.A.
Federal Communications Commission Radio
Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RF Exposure Warning: This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Matsushita Electric Corporation of America One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP-5 (1-800-527-8675)
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Regulation Notice for modem
This equipment contains a FCC approved modem.
Manufacturer of modem: PC TEL Inc.
Model No. PCT2304WT
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
1.This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the telephone company.
2.An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.
3.The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
4.If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
5.The telephone company may take changes in it’s facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
6.If trouble is experienced with this equipment, for repair or warranty information, please contact Matsushita Electric Corporation of America at DIAL TOLL FREE 1-800-LAP- TOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
7.There are no user serviceable parts contained in this equipment.
8.This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
9.The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used.
Started Getting
3
Read Me First
StartedGetting
10.According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem.
“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.”
“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure.”
Notice for the products using LCD
This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>
For Canada
Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit.
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.” “NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.”
REN: See bottom of the computer
Industry Canada
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL
“AVIS: L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être coordonnées par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de réparations ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales. Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un service d’inspection des installations électriques, ou à un électricien, selon le cas.”
“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La terminaison d’une interface téléphonique peut consister en une combinaison de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de touts les dispositifs n’excède pas 5.”
IES: Voir sous le fond de l’ordinateur
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1)this device may not cause interference, and
(2)this device must accept any interference, including interference that may cause undesired operation of the device.
4
Important Safety Instructions / Importantes Mesures De Sécurité
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3.Do not use the telephone to report a gas leak in the vicinity of the leak.
4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Certaines mesures de sécurité doivent être prises pendant l’utilisation de matérial téléphonique afin de réduire les risques d’incendie, de choc électrique et de blessures. En voici quelquesunes:
1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver, dans un sous-sol humide ou près d’une piscine.
2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans fil) pendant un orage électrique. Ceci peut présenter un risque de choc électrique causé par la foudre.
3.Ne pas utiliser l’appareil téléphonique pour signaler une fuite de gaz s’il est situé près de la fuite.
4.Utiliser seulement le cordon d’alimentation et le type de piles indiqués dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux règlements pertinents quant à l’élimination des piles.
CONSERVER CES INSTRUCTIONS
Started Getting
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.
5
Read Me First
StartedGetting
Informations destinées à l’utilisateur
Cet appareil et votre santé
Cet appareil, comme les autres dispositifs radio, émet une énergie électromagnétique de fréquence radio. Le niveau d’énergie émis par cet appareil est cependant bien inférieur à l’énergie électromagnétique émise par certains dispositifs sans fil comme, par exemple, les téléphones portables.
Cet appareil fonctionnant dans les limites des directives concernant les normes et recommandations de sécurité des fréquences radio, nous pensons que l’utilisation de cet appareil ne pose aucun risque pour les consommateurs. Ces normes et recommandations reflètent le consensus de la communauté scientifique et découlent des délibérations de commissions et comités de scientifiques qui examinent continuellement et interprètent les documents de travaux approfondis. Dans certaines situations ou certains lieux, l’utilisation de cet appareil peut être restreinte par le propriétaire du bâtiment ou les responsables de l’organisation. Par exemple, ces situations peuvent inclure :
L’utilisation de cet appareil à bord d’un avion, ou
Dans un autre milieu où le risque d’interférence avec d’autres dispositifs ou services est perçu ou identifié comme nuisible. Si vous n’êtes pas sûr de la politique qui s’applique à l’utilisation de dispositifs sans fil dans une organisation ou lieu spécifique (un aéroport, par exemple), il est conseillé de demander l’autorisation d’utiliser cet appareil avant de le mettre sous tension.
Informations sur la réglementation
Nous ne serons pas tenus responsables de parasites radioélectriques ou de télévision provoqués par une modification non autorisée de cet appareil. La rectification des parasites provoqués par une telle modification non autorisée sera la responsabilité de l’utilisateur. Nous, et les revendeurs ou distributeurs mandatés de l’appareil ne seront pas tenus responsables de dommages ou violations de règlements gouvernementaux qui peuvent se produire du fait du non respect de ces directives.
6
Lithium Battery
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel.
Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données comme la date et l’heure notamment. Elle ne devra être remplacée que par un technicien qualifié.
Avertissement! Risque d’explosion en cas de non respect de cette mise en garde!
CD Drive Caution
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL
AVERTISSEMENT!
CET APPAREIL UTILISE UN LASER.
L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIATIONS DANGEREUSES.
NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOI-MÊME.
CONFIER TOUT TRAVAIL D'ENTRETIEN À UN PERSONNEL QUALIFIÉ.
Bottom
CLASS 1 LASER PRODUCT
LASER KLASSE1
Laser safety information is appropriate only when drive with laser is installed.
Les mesures de sécurité relatives au laser ne s’appliquent que lors de l’installation d’une unité avec laser.
Precautions
This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling.
Before putting the computer away, be sure to wipe off any moisture.
Usage |
|
||
Getting |
|||
|
Avoid Extreme Heat and Cold |
||
|
|
||
|
Do not store or use the computer in locations |
|
|
|
exposed to heat, direct sunlight, or extreme cold. |
|
|
|
Avoid moving the computer between locations with |
Started |
|
|
Storage: -20 oC to 60 oC {-4 oF to 140 oF} |
||
|
large temperature difference. |
|
|
|
Operation: 5 oC to 35 oC {41 oF to 95 oF} |
|
|
|
|
|
|
|
Avoid Direct Sunlight on the LCD Panel |
|
|
|
The LCD panel should not be exposed to direct |
|
|
|
sunlight or ultraviolet light. |
|
|
|
Avoid Humidity, Liquids and Dust |
|
|
|
Do not store or use the computer in locations exposed |
|
|
|
to high humidity, liquids (including rain) or dust. |
|
|
|
Prevent Shock |
|
|
|
Avoid subjecting the computer to severe vibrations or |
|
|
|
impact. Do not place the computer inside a car trunk. |
|
|
|
Avoid Radio Frequency Interference |
|
|
|
Do not place the computer near a television or ra- |
|
|
|
dio receiver. |
|
|
|
Avoiding low-temperature burns |
|
|
|
|
||
|
Avoid more than casual contact with any heat pro- |
|
|
|
ducing area of the notebook computer, AC adap- |
|
|
|
tor, and any option or accessory you use with it. |
|
|
|
Even low heat, if warmer than body temperature, |
|
|
|
can cause a burn, if the skin is exposed to the heat |
|
|
|
source for a long enough period of time. |
|
Handling
Avoid Magnetic Fields
Keep the computer away from magnets.
Data stored on the hard disk may be lost.
Avoid Stacking
Do not place heavy objects on top of the computer.
Keep Small Objects Away
Do not insert paper clips or other small objects into the computer.
Do Not Disassemble the Computer
Do not attempt to disassemble your computer.
Avoid Excessive Force on the Display
Do not apply excessive downward force on the display when it is completely opened, especially when plugs and/or cables are connected to the rear
of the computer.
7
Read Me First
Peripherals
Incorrectly using peripheral devices may lead to a decrease in performance, an increase in temperature and/or damage your computer. For more information on peripheral devices, refer to the Reference Manual.
Precautions (Battery Pack)
Cables
Use of an interface cable longer than 3 m (9.84 feet) is not recommended.
Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage.
Started |
Avoid Heat |
|
Do not throw the battery pack into a fire or ex- |
||
|
||
|
pose it to excessive heat. |
Getting |
Keep Articles Away |
ing. |
|
|
Do not place the battery pack together with articles |
|
such as necklaces or hairpins when carrying or stor- |
Do Not Disassemble
Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it.
Do Not Short
Do not short the positive (+) and negative (-) contacts.
Avoid Extreme Heat, Cold and Direct Sunlight
Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct sunlight, in a hot place (in a car on a sunny day, for example), or in a cold place.
Do Not Use With Any Other Computer
The battery pack is rechargeable and was intended for the specified computer. Do not use it with a computer other than the one for which it was designed.
Do Not Put into a Microwave
Do not put the battery pack into a microwave oven or a pressurized chamber.
Stop Using
Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, remove it from the computer and stop using it.
Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.
Do not expose the battery pack to water, or allow it to become wet.
If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.
This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity.
The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible.
NOTE
The battery pack may become warm during recharging or normal use. This is completely normal.
Recharging will not commence outside of the allowable temperature range (0 °C to 50 °C {32 °F to 131 °F}). (
“Battery Power”) Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or less.)
If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range.
This computer has a high temperature mode function that prevents the degradation of the main battery in high temperature environments. If the high temperature mode is enabled in the Setup Utility (
“Setup Utility”), a level of 100% in the [High Temperature] mode is about a level of 80% in the [Normal Temperature] mode.
The battery pack is a consumable item. If the amount of time the computer can be run off a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.
When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.
8
Saving Data on the Hard Disk
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable.
Do not power off your computer while software applications are running or hard disk drive indicator (
) is on.
Properly shut Windows* down to avoid problems.
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or should you inadvertently change or erase data.
Use the security function for all important data. (
“Security Measures”)
*Windows 2000 : This computer uses Microsoft® Windows® 2000 Professional. Windows XP : This computer uses Microsoft® Windows® XP Professional.
Hard Disk Lock
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read/write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee the complete protection of data. “Security Measures”)
When Using Peripheral Devices
Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc. Also, in addition to following this manual and the Reference Manual, carefully read the instruction manuals for the peripheral devices being used.
Use only peripheral devices that conform to the computer’s specifications.
Connect the devices properly, paying close attention to the condition and position of the connectors.
If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc.) .
If the connector has holding screws, fasten the screws firmly.
Do not carry the computer with cables attached, and do not pull on the cables forcefully.
When Disposing of or Transferring Ownership of This Device
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility (included) ( page 31). (Note that this hard disk data erase utility does not guarantee that data will be completely erased.)
Also, note that if you transfer ownership of this device without deleting commercial software that you have installed to the hard disk, you may be in violation of the licensing agreement for that software.
Computer Viruses
Users are advised to purchase the latest versions of virus protection software and use them regularly.
We recommend you run the software:
•After booting your computer.
•After receiving data.
We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
Wireless LAN
To prevent theft of data or unauthorized access to the hard disk via a wireless LAN
If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption.
Started Getting
9
Read Me First
StartedGetting
Usage Environment
Environment
Place the computer on a flat stable surface. Do not place the computer upright or allow it to tip over. When the computer receives extremely strong shock after falling, the hard disk may become inoperable.
In use: |
Temperature: 5 °C to 35 °C {41 °F to 95 °F} |
|
Humidity : 30% to 80% RH (No condensation) |
Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F} Humidity : 30% to 90% RH (No condensation)
Places not to use your computer
Such areas may result in damage to the computer.
Areas with electronic equipment
These areas may interfere with your display or cause your computer to produce strange sounds.
Areas with extremely high/low temperatures
Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm.
Handling
Do not drop or hit your computer against solid objects.
Do not carry your computer when it is on.
Remove all external devices, cables, and PC Cards sticking out of the computer (see the figure on the left) before transporting the computer.
We recommend preparing a fully charged battery.
When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
Do not carry the computer while the display is open, or carry it by gripping the display.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
Always carry your computer with you. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue.
It is a good idea to make backup copies on disks and carry them with you.
Do not leave a disk in the drive while transporting your computer.
Maintenance
Touch Pad
page 19
CAUTION
Display
<Models with touchscreen>
Use the soft cloth included with the computer. (For more information, refer to “Suggestions About Cleaning the LCD Surface” that comes with the soft cloth.)
<Models without touchscreen>
Avoid using water when cleaning the panel. Ingredients included in water may leave scratches and reduce readability of the screen.
<When cleaning dust/dirt>
Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.
Sweep dust/dirt with fine brush, then wipe it with a dry soft cloth used for cleaning glasses. <When cleaning oily surface>
Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with a dry soft cloth used for cleaning glasses.
Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water.
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it to work improperly or be damaged.
10
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations.
1 Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, contact Panasonic Technical Support.
AC Adaptor ........... |
1 AC Cord ................ |
1 Battery Pack ........ |
1 |
Model No: CF-AA1653A |
|
Model No: CF-VZSU26 |
|
|
|
||
Modem Telephone |
Product Recovery CD-ROM |
||
Cable |
|||
1 |
|
||
|
Windows 2000 |
Windows XP |
Started Getting
Operating Instructions (This book) 1 Windows Book... ........................ |
1 |
||
<Model with a DVD-ROM Drive> |
|
||
WinDVD™ CD-ROM ( |
|
page 32) |
1 |
|
|||
|
|||
<Model with a DVD-ROM & CD-R/RW Drive> |
|
||
WinDVD™ CD-ROM ( |
|
page 32) |
1 |
|
|||
|
|||
B’s Recorder/B’s CLiP CD-ROM ......................................................... |
1 |
||
B’s Recorder/B’s CLiP Booklet ........................................................... |
1 |
<Only for models with touchscreen> |
|
|
Soft Cloth ................................... |
1 Stylus ......................................... |
1 |
|
( |
“Touchscreen”) |
|
|
2 Read the LIMITED USE LICENSE AGREEMENT ( |
page 29) |
||
|
|
Before removing the seal covering the power switch, read the LIMITED USE LI- |
|||
|
|
CENSE AGREEMENT. |
|
|
|
Latch |
1 |
3 Turn the computer over and insert the battery pack |
|
||
|
|
||||
|
|
1 |
Slide the right latch to the unlock position ( |
). |
|
|
|
2 |
Make sure the battery pack is facing the correct direction, slide it in the direction |
||
|
|
|
of the arrow. |
|
|
2 |
3 |
3 |
Slide the right latch to the lock position ( |
), and then check to ensure that the |
|
|
battery pack is held firmly. |
|
|
||
|
|
|
|
|
|
|
|
|
(Left latch is locked automatically.) |
|
|
|
CAUTION |
|
Battery Pack |
Be sure the battery pack is properly connected to the connector. |
|
|
Do not touch the terminals on the battery pack and the computer. The battery |
|
|
pack may no longer function properly if the contacts are dirty or damaged. Also, |
|
|
the computer may not operate properly. |
|
|
Before using the battery pack, carefully read “Precautions (Battery Pack)” |
|
|
( |
page 8). |
11
StartedGetting
First-time Operation
4 Connect your computer to a power outlet
DC-IN Jack
DC IN 15.1-16.0 V
Latch
The battery pack will be charged automatically. Charging Time: Approx. 3 hours
(Varies depending on the usage conditions.)
CAUTION
Be sure the AC adaptor is connected until completing Step 7.
When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone.
3 |
5 Open the display |
|
|
1 |
Pull the carrying handle forward. |
2 |
2 |
Lift up the latch. |
|
3 |
Lift open the display. |
|
1 |
|
Power |
6 Turn your computer on |
|
Press the power switch and hold it for approximately one second until the power indi- |
||
Indicator |
||
cator turns on before releasing it. |
CAUTION
|
Do not press the power switch and hold it for more than four seconds; this will |
|
cause the power to be turned off forcibly. |
|
Do not press the power switch repeatedly. |
|
Once the computer is powered off, you must wait at least ten seconds before |
Power |
powering it on again. |
Switch |
7 Setup Windows |
|
|
|
Moving the cursor ( ) or clicking buttons can be performed with the touch pad |
( page 19).
Windows 2000
CAUTION
Do not press any key or move the touch pad until [Windows 2000 Professional
Setup] is displayed.
1 At the [Welcome to the Windows 2000 Setup Wizard], select [Next].
2After reading the agreement, select [I accept this agreement] or [I don’t accept this agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
12
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date, time and the time zone, then select [Next].
7 At [Networking Settings], select [Typical settings], then select [Next].
8At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next].
The computer will restart.
9 At [Welcome to the Network Identification Wizard], select [Next].
10At [Users of This Computer], select [Users must enter a user name and password to use this computer], then select [Next].
11Select [Finish].
12Enter your administrator password and select [OK].
<Only for models with touchscreen>
If the cursor can not be pointed correctly with the stylus, perform [Calibration] in [Start] - [Settings] - [Control Panel] - [Touch Panel].
Windows XP
CAUTION
Do not press any key or move the touch pad until [Windows XP Professional Setup] is displayed.
1 At [Welcome to the Windows XP Setup Wizard], select [Next].
2After reading the agreement, select [I accept this agreement] or [I don’t accept this agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated. You can create a password reset disk beforehand ( page 15).
6 Enter the correct date, time and the time zone, then select [Next].
NOTE
It may take about 2 - 3 minutes until the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
7 At [Networking Settings], select [Typical settings], then select [Next].
Started Getting
13
First-time Operation
StartedGetting
Label on the top surface, and insert the shutterside headfirst.
USB Floppy
Disk Drive
8At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next].
The computer will restart.
9 Enter your administrator password and select .
<Only for models with touchscreen>
If the cursor can not be pointed correctly with the stylus, perform [Calibration] in [Start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel].
NOTE
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes].
This concludes the first-time use operation guidelines.
Create Backup Disks for Reinstallation
1Windows 2000
Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk].
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [Create Backup Disk].
When [You do not need to make “BACKUP DISK”] is displayed, there is no need to create a backup disk. If this message is not displayed, create backup disks for reinstallation.
To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and formatted 2HD floppy disks are needed.
2 Connect the USB floppy disk drive to your computer.
NOTE
The floppy disk drive must be the A drive.
3Prepare 2HD floppy disks and make sure they are not in the write-protected state, and then set it.
Follow the on-screen instructions.
4 Place a label identifying the contents on each disk.
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the disk by following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your computer to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is displayed, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, power off your computer or use the standby or hibernation function (
“Standby/ Hibernation Functions”).
<When [You do not need to make “BACKUP DISK”] is not displayed (procedure 1 above)>
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its original state. In this case, contact Panasonic Technical Support.
14