Panasonic 9TGCF-721 Users Manual
Personal Computer
Supplementary Instructions
CF-72 Series with Wireless LAN
This Supplementary Instructions manual explains how to get started with a wireless LAN and point out cases where the operation
of the computer will differ from that in the Operating Instructions and/or Reference Manual.
This model has a wireless LAN.
Wireless LAN Antenna
NOTE
Wireless LAN communications are done via an antenna.
When making a connection via a wireless LAN, raise the antenna as shown in the right
figure. Otherwise, you should keep the antenna retracted.
When setting Antenna Mode (Receive/Transit) in [Aironet Client Utility (ACU)] - [Profile Manager], select [Diversity (Both)] or [Left Antenna Only].
®
Illustrations in this Manual
Windows 2000 : Information for Microsoft® Windows® 2000 Professional users.
Windows XP : Information for Microsoft® Windows® XP Professional users.
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product
however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this
product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible
representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g.
airports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
W e are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of
interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.
1
For U.S.A.
Federal Communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or
modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP-5
(1-800-527-8675)
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body (excluding
extremities: hands, wrists, and feet) and must not be co-located or operated with any antenna or transmitter.
First-time Operation “OPERATING INSTRUCTIONS (page 9)”
Replace the step 6 for the following. “OPERATING INSTRUCTIONS (page 10)”
6 Turn your computer on
1 Slide the power switch and hold it for approximately
one second until the power indicator turns on before releasing it.
2 When [Press F2 to enter SETUP] is displayed, press
F2 , then run the Setup Utility.
Replace the step 8 for the following. “OPERATING INSTRUCTIONS (page 11)”
8 Setup Windows
Moving the cursor ( ) or clicking buttons can be performed with the touch pad.
Windows 2000
CAUTION
Do not press any key or move the touch pad until
[Windows 2000 Professional Setup] is displayed.
3 Select [Advanced] menu, then set [Wireless LAN] to
[Disable].
4 Press F10 .
At the confirmation message, select [Yes], then press
Enter .
1 At the [Welcome to the Windows 2000 Setup Wiz-
ard], select [Next].
2 After reading the agreement, select [I accept this
agreement] or [I don’t accept this agreement], then
select [Next].
NOTE
If [I don’t accept this agreement] is selected, the
Windows setup will be aborted.
2
Loading...