Panasonic 9TGCF 503 User Manual

Please read these instructions carefully before using this product and save this manual for future use.

Contents

Getting Started

Operation

Troubleshooting

Getting StartedOperationTroubleshootingAppendix

Appendix

Personal Computer

OPERATING INSTRUCTIONS

Model No. CF-50 series

[Additional Manual]

Reference Manual

This manual can be accessed on your

computer.

Refer to Î page 19 on how to access

the Reference Manual.

Read Me First. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Names and Functions of Parts . . . . . . . . . . . . . . . 9

First-Time Operation . . . . . . . . . . . . . . . . . . . . . 11

Starting Up/Shutting Down . . . . . . . . . . . . . . . . . 15

Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Reference Manual . . . . . . . . . . . . . . . . . . . . . . . 19

Useful Information . . . . . . . . . . . . . . . . . . . . . . . 20

List of Error Codes . . . . . . . . . . . . . . . . . . . . . . . 24

Dealing with Problems (Summary). . . . . . . . . . . 25

Reinstalling Software . . . . . . . . . . . . . . . . . . . . . 31

LIMITED USE LICENSE AGREEMENT. . . . . . . 33

Hard Disk Data Erase Utility. . . . . . . . . . . . . . . . 35

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . 42

For the Model No., insert the 12 digit number (for example, CF-50J2KUEKM) located on the bottom of the computer.

Introduction

Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new

computer.

Illustrations and Terminology in this Manual

z Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to

understand.

z If the user has logged on without the administrator authority, some functions may not be executable, and some screens may be

not displayed as shown in this manual.

If this happens, log on with the administrator authority to enable these functions.

z Confirm the latest information on optional products in catalogs, etc.

z In this manual, “Microsoft

Windows

XP Professional” is indicated as “Windows” or “Windows XP”.

z In this manual, the following software packages are described as follows:

"WinDVD™ 4" as "WinDVD"

"B's Recorder GOLD7 BASIC" as "B's Recorder"

"B's CLiP 5" as "B's CLiP"

z The following drives may be described as "CD/DVD drive".

DVD-ROM & CD-R/RW drive, DVD MULTI drive

z Circular media such as DVD-ROM and CD-ROM are described as "discs".

duced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.

No patent liability is assumed with respect to the use of the information contained herein.

Disclaimer

Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no

liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.

Trademarks

Microsoft

, Windows

and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other

countries.

PS/2

is a registered trademark of International Business Machines Corporation.

Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation.

Adobe

and Acrobat

are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or

other countries.

WinDVD™ is a trademark of InterVideo, Inc.

Panasonic

is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own compa-

nies.

NOTE NOTE provides a useful fact or helpful information.

CAUTION CAUTION indicates a condition that may result in minor or moderate injury.

Enter

This illustration means to press the [Enter] key.

This illustration means to press and hold the [Fn] key, then press the [F5] key.

[start] - [Run] This illustration means to click [start], then to click [Run]. For some applications,

you may need to double-click.

Î or ⇒ These symbols indicated related pages.

Î : Refer to the page in this Operating Instructions

⇒ : Refer to the Reference Manual

Customer's Record

Model No.*

Serial No.

Code No.

Date of Purchase

Dealer's Name

Dealer's Address

Getting Started

Read Me First

Federal Communications Commission Radio Fre-

quency Interference Statement

Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions,

may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

z Reorient or relocate the receiving antenna.

z Increase the separation between the equipment and

receiver.

z Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

z Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral.

Also, any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

FCC RF Exposure Warning: This computer is provided

with PC Card slots that could be used with wireless trans-

mitter(s), which will be specifically recommended, when

they become available. Other third-party wireless trans-

mitter(s) have not been RF exposure evaluated for use

with this computer and may not comply with FCC RF

exposure requirements.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received,

including interference that may cause undesired opera-

tion.

Responsible Party:

Matsushita Electric Corporation of America

One Panasonic Way Secaucus, NJ 07094

Tel No:1-800-LAPTOP-5 (1-800-527-8675)

FCC RF Exposure Warning:

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accor-

dance with provided instructions and minimum 1.5 cm

spacing must be provided between antenna and all per-

son’s body (excluding extremities of hands, wrist and feet)

during wireless modes of operation.

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter. This

computer is provided with a PC Card slot that could be

used with wireless transmitter(s), which will be specifically

recommended, when they become available. Other third-

party wireless transmitter(s) have not been RF exposure

evaluated for use with this computer and may not comply

with FCC RF exposure requirements.

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

Manufacturer of modem: PC TEL Inc.

Model No. PCT2304WT

1. This equipment complies with CFR47 Part 68 rules.

On the computer is a label that contains, among other

information, the FCC registration number and ringer

equivalence number (REN) for this equipment. If

required, this information must be provided to the tele-

phone company.

2. An FCC compliant telephone cord and modular plug is

provided with this equipment. This equipment is

designed to be connected to the telephone network or

premises wiring using a compatible modular jack

which is Part 68 compliant. See Installation Instruc-

tions for details.

3. The REN is used to determine the quantity of devices

which may be connected to the telephone line. Exces-

sive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In

most, but not all area, the sum of RENs should not

exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as deter-

mined by the total RENs, contact the local telephone

company.

4. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you

in advice that temporary discontinuance of service

may be required. But if advice notice isn’t practical, the

telephone company will notify the customer as soon as

possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it is necessary.

5. The telephone company may take changes in it’s facili-

ties, equipment, operations or procedures that could

affect the operation of the equipment. If this happens

the telephone company will provide advance notice in

order for you to make necessary modifications to

maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair

or warranty information, please contact Matsushita

Electric Corporation of America at DIAL TOLL FREE

1-800-LAPTOP5 (1-800-527-8675). If the equipment is

causing harm to the telephone network, the telephone

company may request that you disconnect the equip-

ment until the problem is resolved.

7. There are no user serviceable parts contained in this

equipment.

For U.S.A.

Read Me First

Getting Started

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party

lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991

makes it unlawful for any person to use a computer or

other electronic device to send any message via a

telephone fax machine unless such message clearly

contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission,

the date and time it is sent and an identification of the

business or other entry, or other individual sending the

message and the telephone number of the sending

machine or such business, other entity, or individual. In

order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used.

10.According to the FCC’s electrical safety advisory, we

recommend that you may install an AC surge arrestor

in the AC outlet to which this equipment is connected.

Telephone companies report that electrical surges,

typically lightning transients, are very destructive to

customer terminal equipment connected to AC power

sources and that this is a major nationwide problem.

“Caution: To reduce the risk of fire, use only No.26 AWG or

larger telecommunication line cord.”

“ATTENTION: Pour réduire le risque d’incendie, utiliser

uniquement des conducteurs de télécommunications 26

AWG ou de section supérieure.”

Notice for the products using LCD

This product uses one or more fluorescent lamps contain-

ing a small amount of mercury. It also contains lead in

some components. Disposal of these materials may be

regulated in your community due to environmental consid-

erations. For disposal or recycling information please

contact your local authorities, or the Electronics Industries

Alliance: <http://www.eiae.org/>

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved

modem unit.

The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified

equipment. This certification means that the equipment

meets telecommunications network protective, opera-

tional and safety requirements as prescribed in the

appropriate Terminal Equipment Technical Require-

ments document(s). The Department does not guaran-

tee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure

that it is permissible to be connected to the facilities of

the local telecommunications company. The equipment

must also be installed using an acceptable method of

connection. The customer should be aware that compli-

ance with the above conditions may not prevent degra-

dation of service in some situations.

Repairs to certified equipment should be coordinated by

a representative designated by the supplier. Any repairs

or alterations made by the user to this equipment, or

equipment malfunctions, may give the telecommunica-

tions company cause to request the user to disconnect

the equipment.

Users should ensure for their own protection that the

electrical ground connections of the power utility, tele-

phone lines and internal metallic water pipe system, if

present, are connected together. This precaution may be

particularly important in rural areas. Caution: Users

should not attempt to make such connections them-

selves, but should contact the appropriate electric

inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN)

assigned to each terminal device provides an indication

of the maximum number of terminals allowed to be con-

nected to a telephone interface. The termination on an

interface may consist of any combination of devices sub-

ject only to the requirement that the sum of the Ringer

Equivalence Numbers of all the devices does not exceed

5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel

homologué. Cette étiquette certifie que le matériel est

conforme aux normes de protection, d’exploitation et de

sécurité des réseaux de télécommunications, comme le

prescrivent les documents concernant les exigences

techniques relatives au matériel terminal. Le Ministére

n’assure toutefois pas que le matériel fonctionnera à la

satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer

qu’il est permis de le raccorder aux installations de

l’entreprise locale de télécommunication. Le matériel

doit également être installé en suivant une méthode

acceptée de raccordement. L’abonné ne doit pas oublier

qu’il est possible que la conformité aux conditions

énoncées ci-dessus n’empêche pas la dégradation du

service dans certaines situations.

Les réparations de matériel homologué doivent être

coordonnées par un représentant désigné par le fournis-

seur. L’entreprise de télécommunications peut

demander à l’utilisateur de débrancher un appareil à la

suite de réparations ou de modifications effectuées par

l’utilisateur ou à cause de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que

tous les fils de mise à la terre de la source d’énergie

électrique, des lignes téléphoniques et des canalisations

d’eau métalliques, s’il y en a, sont raccordés ensemble.

Cette précaution est particulièrement importante dans

les régions rurales. Avertissement: L’utilisateur ne doit

pas tenter de faire ces raccordements lui-même; il doit

avoir recours à un service d’inspection des installations

électriques, ou à un électricien, selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES)

assigné à chaque dispositif terminal indique le nombre

maximal de terminaux qui peuvent être raccordés à une

For Canada

Getting Started

interface. La terminaison d’une interface téléphonique

peut consister en une combinaison de quelques disposi-

tifs, à la seule condition que la somme d’indices

d’équivalence de la sonnerie de touts les dispositifs

n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

Industry Canada

This product complies with RSS210 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of the

device.

When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk

of fire, electric shock and injury to persons, including the

following:

1. Do not use this product near water, for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk

of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the

vicinity of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special

disposal instructions.

SAVE THESE INSTRUCTIONS

Certaines mesures de sécurité doivent être prises

pendant l’utilisation de matérial téléphonique afin de

réduire les risques d’incendie, de choc électrique et de

blessures. En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une

baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à

laver, dans un sous-sol humide ou près d’une piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un

appareil sans fil) pendant un orage électrique. Ceci

peut présenter un risque de choc électrique causé par

la foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler

une fuite de gaz s’il est situé près de la fuite.

4. Utiliser seulement le cordon d’alimentation et le type de

piles indiqués dans ce manual. Ne pas jeter les piles

dans le feu: elles peuvent exploser. Se conformer aux

rélements pertinents quant à l’elimination des piles.

CONSERVER CES INSTRUCTIONS

Important Safety Instructions / Importantes Mesures De Sécurité

Information to the User

This product and your Health

This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emit-

ted by this product however is far much less than the

electromagnetic energy emitted by wireless devices like

for example mobile phones.

Because this product operates within the guidelines found

in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations reflect the

consensus of the scientific community and result from

deliberations of panels and committees of scientists who

continually review and interpret the extensive research lit-

erature.

In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or

responsible representatives of the organization. These sit-

uations may for example include:

z Using this product on board of airplanes, or

z In any other environment where the risk of interference

to other devices or services is perceived or identified

as harmful.

If you are uncertain of the policy that applies on the use of

wireless devices in a specific organization or environment

(e.g. airports), you are encouraged to ask for authoriza-

tion to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer-

ence caused by unauthorized modification of this product.

The correction of interference caused by such unautho-

rized modification will be the responsibility of the user. We

and its authorized resellers or distributors are not liable for

damage or violation of government regulations that may

arise from failing to comply with these guidelines.

Read Me First

Getting Started

Lithium Battery

Lithium Battery!

This computer contains a lithium battery to enable the

date, time, and other data to be stored. The battery should

only be exchanged by authorized service personnel.

Warning! A risk of explosion from incorrect installation or

misapplication may possibly occur.

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui

permet de sauvegarder certaines données comme la date

et l’heure notamment. Elle ne devra être remplacée que

par un technicien qualifié.

Avertissement! Risque d’explosion en cas de non respect

de cette mise en garde!

CD/DVD Drive Caution

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFOR-

MANCE OF PROCEDURES OTHER THAN THOSE SPECI-

FIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOUR-

SELF.

REFER SERVICING TO QUALIFIED PERSONNEL

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES

OU L’EXÉCUTION DE PROCÉDURES AUTRES QUE

CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE

EXPOSITION À DES RADIATIONS DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE

RÉPARER SOI-MÊME.

CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSON-

NEL QUALIFIÉ.

Getting Started

Precautions

 Usage

Avoid Extreme Heat and Cold

Do not store or use the computer in locations

exposed to heat, direct sunlight, or extreme

cold.

Avoid moving the computer between

locations with large temperature difference.

Operation: 5

°C to 35 °C {41 °F to 95 °F}

Storage: -20

°C to 60 °C {-4 °F to 140 °F}

Avoid Direct Sunlight on the LCD Panel

The LCD panel should not be exposed to

direct sunlight or ultraviolet light.

Avoid Humidity, Liquids and Dust

Do not store or use the computer in locations

exposed to high humidity, liquids (including

rain) or dust.

Prevent Shock

Avoid subjecting the computer to severe

vibrations or impact. Do not place the com-

puter inside a car trunk.

Avoid Radio Frequency Interference

Do not place the computer near a television

or radio receiver.

Avoiding low-temperature burns

Avoid more than casual contact with any heat

producing area of the notebook computer, AC

adaptor, and any option or accessory you use

with it. Even low heat, if warmer than body

temperature, can cause a burn, if the skin is

exposed to the heat source for a long enough

period of time.

 Handling

Avoid Magnetic Fields

Keep the computer away from magnets.

Data stored on the hard disk may be lost.

Avoid Stacking

Do not place heavy objects on top of the com-

puter.

Keep Small Objects Away

Do not insert paper clips or other small objects

into the computer.

Do Not Disassemble the Computer

Do not attempt to disassemble your computer.

Avoid Excessive Force on the Display

Do not apply excessive downward force on the

display when it is completely opened, espe-

cially when plugs and/or cables are connected

to the rear of the computer.

z Care should be exercised with regard to the following

in order to avoid the possibility of overheating, fire or

damage.

Avoid Heat

Do not throw the battery pack into a fire or

expose it to excessive heat.

Keep Articles Away

Do not place the battery pack together with

articles such as necklaces or hairpins when

carrying or storing.

Do Not Disassemble

Do not insert sharp objects into the battery

pack, expose it to bumps or shocks, deform,

disassemble, or modify it.

Do Not Short

Do not short the positive (+) and negative (-)

contacts.

Avoid Extreme Heat, Cold and Direct Sun-

light

Do not charge, use or leave the battery pack for

extended periods where it will be exposed to

direct sunlight, in a hot place (in a car on a

sunny day, for example), or in a cold place.

Do Not Use With Any Other Computer

The battery pack is rechargeable and was

intended for the specified computer. Do not use

it with a computer other than the one for which it

was designed.

Do Not Put into a Microwave

Do not put the battery pack into a microwave

oven or a pressurized chamber.

Stop Using

Should the battery emit an abnormal odor,

become hot to the touch, become discolored,

change shape, or become in any way different

from normal, remove it from the computer and

stop using it.

Precautions (Battery Pack)

Read Me First

Getting Started

z Do not touch the terminals on the battery pack. The

battery pack may no longer function properly if the

contacts are dirty or damaged.

z Do not expose the battery pack to water, or allow it to

become wet.

z If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery pack until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

z This computer prevents overcharging of the battery by

recharging only when the remaining power is less than

approx. 95% of capacity.

z The battery pack is not charged when the computer is

first purchased. Be sure to charge it before using it for

the first time. When the AC adaptor is connected to

the computer, charging begins automatically.

z Should the battery leak and the fluid get into your eyes,

do not rub your eyes. Immediately flush your eyes with

clear water and see a doctor for medical treatment as

soon as possible.

NOTE

z The battery pack may become warm during

recharging or normal use. This is completely nor-

mal.

z Recharging will not commence outside of the

allowable temperature range (0

°C to 50 °C {32°F

to 122

°F}) (⇒ Reference Manual “Battery Power”).

Once the allowable range requirement is satisfied,

charging begins automatically. Note that the

recharging time varies based on the usage condi-

tions. (Recharging takes longer than usual when

the temperature is 10

°C {50°F} or less.)

z If the temperature is low, the operating time is

shortened. Only use the computer within the

allowable temperature range.

z The battery pack is a consumable item. If the

amount of time the computer can be run off a par-

ticular battery pack becomes dramatically shorter

and repeated recharging does not restore its per-

formance, the battery pack should be replaced

with a new one.

z When transporting a spare battery inside a pack-

age, briefcase, etc., it is recommended that it be

placed in a plastic bag so that its contacts are pro-

tected.

z Always power off the computer when it is not in

use. Leaving the computer on when the AC adap-

tor is not connected will exhaust the remaining bat-

tery capacity.

Getting Started

Names and Functions of Parts

Getting Started

First-time Operation

Read the steps below to help you learn what parts are included, and to gain an under-

standing of some basic computer-related operations.

1 Confirm the inclusion of all parts.

Make sure the parts shown in the figure have been supplied. If any of these

items are missing or is not working properly, contact Panasonic Technical

Support.(Î page 38)

2 Read the LIMITED USE LICENSE AGREEMENT.(Î page 33)

Before removing the seal covering the power switch, read the LIMITED USE

LICENSE AGREEMENT.

3 Insert the battery pack.

A Turn your computer over and remove the cover (A).

Slide the latch (B), and then without releasing it, slide and remove the

cover.

B Insert the battery pack (C).

Firmly attach the pack to the connector.

C Match the mark (D) on the cover to the body of the computer and slide the

cover back into place.

Be sure the tab does not get caught when closing the cover.

CAUTION

z For an improperly attached cover, your battery pack may fall out while you are

carrying around your computer.

z Do not touch the terminals on the battery pack and the computer. The battery

pack may no longer function properly if the contacts are dirty or damaged. Also,

the computer may not operate properly.

4 Connect your computer to a power outlet.

The battery pack will be charged automatically.

Charging Time: Approx. 3.5 hours

(Varies depending on the usage conditions.)

CAUTION

z Be sure the AC adaptor is connected until completing the first-time use opera-

tion.

z When using the computer for the first time, do not connect any peripheral device

except the battery pack and AC adaptor to the computer.

Handling the AC adaptor

AC adaptor . . . . . . . 1 AC Cord . . . . . . . . . . .1 Battery Pack . . . . . . . 1

Model No :CF-AA1653A

Model No :

CF-VZSU18B

Product Recovery DVD-ROM

. . . . . . . . . . . . . . . . . . 1

Modem Telephone Cable

. . . . . . . . . . . . . . . . . . 1

Operating Instruc-

tions (This book) . . . 1

Windows

Book

. . . . . . . . . . . . . . . . . . 1

B’s Recorder/B’s CLiP

CD-ROM . . . . . . . . . . 1

Getting Started

z Do not twist or pull the AC power cord forcefully. Doing so may damage the con-

nections.

z Use only the specified AC adaptor with your computer. Using an AC adaptor

other than the one supplied might damage the battery and/or the computer.

z When the DC plug is not connected to the computer, disconnect the AC cord

from your AC wall outlet.

z Problems such as sudden voltage drops may arise during periods of thunder

and lightning. Since this could adversely affect your computer, an uninterrupt-

ible power source (UPS) is highly recommended unless running from the battery

pack alone.

5 Open the display.

A Slide the latch located at the front.

B Lift open the display.

6 Turn your computer on.

Press the power switch (A) and hold it for approximately one second until

the power indicator turns on before releasing it.

z Do not press the power switch repeatedly.

z Once the computer is powered off, you must wait at least ten seconds

before powering it on again.

7 Setup Windows.

Moving the cursor or clicking buttons can be performed with the touch

pad.(Î page 18)

z Do not press any key or move the touch pad until [Windows XP Profes-

sional Setup] is displayed.

A At [Welcome to the Windows XP Setup Wizard], select [Next].

B After reading the agreement, select [I accept this agreement] or [I don’t

accept this agreement], then select [Next].

z If [I don’t accept this agreement] is selected, the Windows setup will be

aborted.

C Select settings for your region, then select [Next].

D Enter your name and organization and then select [Next].

E Enter your computer name and administrator password and then select

[Next].

z Remember this password! If the password is forgotten, Windows can-

not be operated.

F Enter the correct date, time and the time zone, then select [Next].

z It may take two to three minutes until the next screen is displayed.

Wait, and do not press any keys, or touch the touch pad, etc.

G Enter your administrator password and select .

8 Create a new account.

A Select [start] - [Control Panel] - [User Accounts] - [Create a new

account].

B Enter a new name for the new account, then select [Next].

C Select [Computer administrator], then select [Create Account].

D <When you want to create a password for the new account>

Select the new account you have created and select [Create a password].

Follow the instructions on the screen to create a password.

E Select [start] - [Turn Off Computer] - [Restart] to restart the computer.

First-time Operation

Getting Started

CAUTION

z Remember this password! If the password is forgotten, Windows cannot be

operated.

NOTE

z When creating a new user account:

• If you make mail settings, create password reset disks (Î page 14), or con-

duct other related operations before creating the user account, you will be

unable to use any previous mail history or settings.

• When you create the first new account, you can only select [Computer admin-

istrator].

Once a “Computer Administrator” account has been created, you can create

additional limited user accounts.

Note also that only the added user account will be displayed in the Welcome

screen. The account for the administrator created during Windows setup will

not be displayed.

z About the Icon Enlarger:

• If the characters or icons on the screen are too small and difficult to see, after

completing Step

8, select on the desktop, or select [start] - [All Pro-

grams] - [Panasonic] - [Icon Enlarger]. This will allow you to magnify the dis-

play of characters and icons on the screen.

• The [Icon Enlarger] can be set separately for each account.

9 Start up Windows

Media Player.

Log on with the administrator authority, and select on the screen.

After this, start up the application following the instructions on the screen.

z During this process, you will be required to agree to the license agree-

ment.For Windows

Media Player, it is necessary to agree to the license

agreement for each account created.

z If [I Decline] is selected or a window is closed without any decision being

made in the license agreement, no icons on the desktop may be selected.

In this case, restart the computer.

z To have DVD video and MPEG files played back automatically on

WinDVD, start up Windows

Media Player, select [Tools] - [Options], and

then remove the check mark from [DVD Video] and [Movie file (mpeg)] in

[File Types] on the screen shown at left.

z After completing the settings, select on the screen, and close the

Windows

Media Player.

NOTE

z If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wire-

less LAN”.

This concludes the first-time use operation guidelines.

Getting Started

z Depending on the Windows settings, installed applications, and drivers, menus and

other displays may differ, or some functions (such as use of the password reset

disk) may be inoperable. Check with your system administrator for details.

z You can select Classic view for the Control Panel or select the Classic Start menu.

You can also change the way a user logs on or off.

The procedure in this manual uses the method or view of the Windows XP default

setting (not Classic view or Classic Start menu etc.).

 Resetting the password

Windows XP has a function to reset a forgotten password.

To use this function, you need to create a password reset disk beforehand following the

steps below.

A Select [start] - [Control Panel] - [User Accounts].

B Select [Prevent a forgotten password] from [Related Tasks] menu of the

account you used to logon and create a password reset disk following the

on-screen instructions.

Store the password reset disk in a safe place.

z Only the logon password for each account can be reset.

The password set in the Setup Utility (⇒ Reference Manual “Setup Util-

ity”) cannot be reset.

Information for Windows XP

+ 32 hidden pages