Panasonic 96NKX HNL100 Users Manual
Installation Guide
Home Network System
Smart Motion Light
Model No. KX-HNL100
Thank you for purchasing a Panasonic product.
This document explains how to install the unit properly.
For details about how to use the system, refer to the User’s Guide (page 20).
Please read this document before using the unit and save it for future reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
In order to use this device:
R Download the latest version of the [Home Network] app.
R Update your hub to the latest firmware version (version 5.50 or later). For more information, refer to the User’s Guide (page 20).
Printed in China
Table of Contents |
|
Introduction |
|
Accessory information ......................... |
3 |
Important Information |
|
About this system ................................ |
4 |
For your safety .................................... |
4 |
Important safety instructions ............... |
6 |
For best performance .......................... |
6 |
Other information ................................ |
6 |
Installation Location |
|
Wireless communication range ........... |
8 |
Information about sensor features ...... |
8 |
Installation location examples ............. |
9 |
Do not install in these locations ........ |
10 |
Setup |
|
Part names and functions ................. |
12 |
Confirming the status ........................ |
12 |
Setup overview ................................. |
12 |
Inserting the batteries ....................... |
13 |
Registering the unit ........................... |
14 |
Confirming the installation area ........ |
14 |
Installation ......................................... |
15 |
Appendix |
|
Features available when using the |
|
[Home Network] app ......................... |
20 |
Accessing the User’s Guide .............. |
20 |
Specifications .................................... |
21 |
FCC and other information ................ |
22 |
Customer services ............................ |
23 |
Limited Warranty (ONLY FOR |
|
U.S.A.) ............................................... |
24 |
2
|
|
Introduction |
|
|
|
|
|
|
|
|
|
|
|
|
Accessory information |
|
|
|
|
|
|
|
|
|
Supplied accessories |
|
|
|
|
|
|
|
|
|
No. |
Accessory item/Part number |
|
Quantity |
|
A |
Wall mounting screws (25 mm (1 inch))/XTB4+25AVW |
|
4 |
|
B |
Suspension wire tools |
|
1 |
|
|
– Safety wire: 1 |
|
|
|
|
PQME10080Z |
|
|
|
|
– Washers: 2 |
|
|
|
|
Small washer for attaching the safety wire to the unit |
|
|
|
|
ø12 mm (15/32 inches)/XWG26D12VW |
|
|
|
|
Large washer for attaching the safety wire to the wall |
|
|
|
|
ø16 mm (5/8 inches)/XWG4F16VW |
|
|
|
|
– Screws: 2 |
|
|
|
|
Small screw for attaching the safety wire to the unit |
|
|
|
|
10 mm (3/8 inches)/XTB26+10GVW |
|
|
|
|
Large screw for attaching the safety wire to the wall |
|
|
|
|
25 mm (1 inch)/XTB4+25AVW |
|
|
|
AB
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Trademarks
R iPhone and iPad are registered trademarks of Apple Inc. R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
For assistance, please visit http://shop.panasonic.com/support |
3 |
Important Information
About this system
R This system is an auxiliary system; it is not designed to provide complete protection from property loss.
Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.
R The system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure.
For your safety
To prevent severe injury and loss of property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
R Do not connect non-specified devices.
Installation
R Install this product in accordance with the provided instructions.
R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms.
Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
R Do not mount the product in an unstable location, in a location subject to frequent vibration, on a ceiling, or on a weak wall. (Do not mount on gypsum board, concrete blocks,
wooden materials exposed to the outdoors, walls with very rough surfaces, or surfaces that are narrower than the width of the wall mount bracket.) There is a risk of injury if the product falls, or of fire or electric shock if water enters the product.
R Install the product only on a vertical surface. Do not install the product on a ceiling, as the product may fall, resulting in damage or injury.
R Keep small parts (screws, washers, etc.) out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.
R Panasonic will not be held responsible for damage or injury caused by improper connection, installation, or usage.
Operating safeguards
R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.
R Do not disassemble the product.
R Keep the sensor range caps out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.
R Never put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center.
Medical
R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and
4For assistance, please visit http://shop.panasonic.com/support
Important Information
1.93 GHz with a peak transmission power of 115 mW.
R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
CAUTION
Installation and location
R Although this product conforms to the IPX5* code, do not intentionally expose it to water.
*IPX5 indicates that the product is protected against water jets: water projected at all angles through a 6.3 mm (1/4 inches) nozzle flow rate of 12.5 liters/minute at a pressure of 30 kN/m2 for 3 minutes from a distance of 3 meters (9 feet
10 inches).
R Do not mount the product on the following materials: gypsum board,
ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1 inch) thick, etc.
Preventing accidents and injuries
R The safety wire must be used when mounting the product. There is a risk of injury if the product falls.
R To avoid risk of damage to the eyes, do not look directly at the LED when it is lit.
R Consider the installation environment carefully when installing the product. Pay particular attention to infants, children, and the elderly, as they may be more sensitive to bright lights.
Optical radiation cautions
Possibly hazardous optical radiation emitted from this product
Do not stare at operating lamp. May be harmful to the eyes.
Battery
R Do not open or mutilate the batteries. Released electrolyte from batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
R Exercise care when handling batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
R The batteries should be used correctly, otherwise the product may be damaged due to battery leakage.
R Do not charge, short-circuit, disassemble, or heat the batteries.
R Do not dispose of batteries in a fire. R Remove all the batteries when
replacing.
R Do not mix old, new or different types of batteries.
R It is recommended that batteries are replaced annually.
R Keep out of the reach of small children. There is a risk of swallowing. If a battery is swallowed, seek medical attention immediately.
R Remove the batteries if they become unusable. There is a risk of leakage, overheating, and rupture. Do not attempt to use a battery if it is leaking.
R Do not intentionally pour water on the batteries or allow them to get wet. There is a risk of fire and smoke. If the batteries becomes wet, remove them immediately and contact an authorized service center.
For assistance, please visit http://shop.panasonic.com/support |
5 |
Important Information
Important safety instructions
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2.Use only the batteries indicated in this document. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Hub location/avoiding noise
The hub and other compatible Panasonic devices use radio waves to communicate with each other.
R For maximum coverage and noise-free communications, place your hub:
–at a convenient, high, and central location with no obstructions between the product and hub in an indoor environment.
–away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.
–facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.)
R If the reception for a hub location is not satisfactory, move the hub to another location for better reception.
Environment
R The product should be kept free from excessive smoke, dust, high temperature, and vibration.
R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors.
R The product should be kept free from excessive smoke, dust, high temperature, and vibration.
R Do not place heavy objects on top of the product.
R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than -20 °C (-4 °F) or greater than 50 °C (122 °F). Damp basements should also be avoided.
R Do not allow the infrared sensor to become scratched or dirty. (This may cause incorrect detections, malfunctions, or damage to the infrared sensor.)
R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances.
Other information
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Routine care
R Wipe the outer surface of the product with a soft moist cloth.
R Do not use any cleaning products that contain alcohol, polish powder,
6For assistance, please visit http://shop.panasonic.com/support
Important Information
powder soap, benzine, thinner, wax, petroleum, or boiling water. Also do not spray the product with insecticide, glass cleaner, or hair spray. This may cause a change in color or quality of the product.
R Do not apply running water to the product.
Notice
For assistance, please visit http://shop.panasonic.com/support |
7 |
Installation Location
Wireless communication range
The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices.
R Metal doors or screens
R Walls containing aluminum-sheet insulation
R Walls made of concrete or corrugated iron
R Double-pane glass windows R Multiple walls
R When using each device on separate floors or in different buildings
Information about sensor features
The unit utilizes an infrared sensor (i.e., heat sensor).
Please read the following information before deciding where to install the unit.
Note:
R The unit’s motion sensor features are not designed to be used in situations that require high reliability. We do not recommend use of the unit’s motion sensor features in these situations.
R Panasonic takes no responsibility for any injury or damage caused by the use of this unit.
Using heat to detect motion
The unit’s infrared sensor can detect motion by recognizing temperature differences that occur within the range of the sensor. It does this by detecting the infrared rays that are emitted naturally by people, animals, etc., which correlate to the object’s temperature. The detection range is indicated in the illustration by the gray area in front of the unit.
Detection range when looking from above
PLACE HOLDER
Horizontal detection range
Approx. 120°
Detection range when looking from the side
B
PLACE HOLDER
A
Vertical detection range
Approx. 58°
Distance of detectable motion
Approx. 3 m (9.8 feet)
8For assistance, please visit http://shop.panasonic.com/support
Loading...