Panasonic 2318 User Manual

• Rate-of-rise and fixed temperature alarm levels

• Addressable or conventional

Fire alarm systems

Combination heat

detector 2318

General

Heat detector 2318 is a conventional com­bination heat detector, i.e. it "gives an
alarm" at a certain fixed temperature (58°C)
and/or at a certain temperature increase
within a certain time, ("rate-of-rise").

The sensing element is a thermistor.

Addressable or conventional

The detector can be plugged in a
conventional base 2324 connected to a
conventional zone line (or plugged in an
addressable base 2330 connected to a COM
loop).

Product applications

This conventional heat detector can be used
in the systems EBL500 / 512 / 128 / 1000 /

2000.
The detector is intended for indoor use and

in dry premises.
Product applications are small rooms where

the temperature can be expected to rise
rapidly in case of a fire or places where
smoke detectors can not be used.

For more details, see Planning Instructions
and Connection diagrams.

Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: [phone] • Fax: [phone]
[e-mail] • www.panasonic-fire-security.com

Type number

2318 Combination heat detector

Technical data

Voltage (V DC)
rated

allowed
normal

Current consumption at nom. volt.
(mA)

quiescent (detector only)
active (detector only)

Ambient temperature (°C)
operating

storage
Ambient humidity (% RH) max. 95, non condensing
Ingress Protection rating (estimated) IP51

Alarm temp. (fixed temp. part)
Weight (g) 85

Colour grey (N8, Muncell colour code)
Approvals CE; EN54/5, response grade 1.

24
15-30
24

Depending on the type of base it is plugged into. For more details see
EBL512 Planning Instructions.

0.03
min. 3

-10 to +50

-25 to +70

58°C

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet Date of issue Revision / Date of revision

MEW00449 2003-09-17 2 / 2006-08-31