Panasonic 22B002A Users Manual

PRELIMINARY
Safety First
Your new phone is a convenient and effective communications tool, but it can be hazardous when used improperly. To avoid harming yourself or anyone else, please review the following information before using your phone.
Batteries
Batteries can cause property damage, injury, or burns if the terminals are touched with a conductive material (for example, metal jewelry, keys, and so on). Therefore, use caution when handling a charged battery. Additional precautions and notes are listed below:
Never throw a battery into a fire; it may explode.
Fully recharge the battery if the battery is low or as soon as the
low-battery alert beeps. Do not drop the battery.
Do not bridge battery contacts together with metallic objects.
Do not remove the battery from the phone while the phone is
powered on. Settings you have changed may revert to their previous settings.
A recyclable lithium ion/polymer battery powers your phone. Please call 1-800-8-BATTERY for information on how to recycle the battery.
Charging Devices
Use only Genuine Panasonic charging accessories. Use of attachments not recommended by Panasonic or your wireless service provider may result in fire, electrical shock, or injury. Panasonic is not responsible for damage caused by using non-Panasonic accessories.
Do not expose charging adapters to moisture, water, or the weather.
Do not use an adapter with a damaged cord.
When using a DC adapter in an automobile, a small amount of electricity flows through the adapter, even if the phone is turned off. Remove the plug from the cigarette lighter whenever the phone will be left in the vehicle for long periods of time.
Caution: The cigarette lighter must have a 12V negative ground socket. Do not use the adapter in a vehicle that has a positive ground system.
Safety First 1
PRELIMINARY
General
Do not use the phone in extreme temperature or humidity. The
specified operating temperature range is -22°F to +140°F (-30°C to +60°C). Do not expose the phone (particularly the display) to direct sunlight
for extended periods of time. Do not attempt to disassemble the phone. There are no
user-serviceable parts inside. Do not expose the phone to rain or spill liquids on it.
Do not carry the phone by holding the antenna.
Do not use any accessories other than those designed for use with
your phone. Use of attachments not recommended or sold by your wireless
service provider may result in fire, electrical shock, or injury. Panasonic cannot be held responsible for damages caused by using
non-Panasonic accessories.
Availability of Service
This phone, like any wireless phone, operates using radio signals, wireless and landline networks, and user-programmed functions. Because of this, connection in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential communications (for example, medical emergencies). When operating in analog mode, the service area where you can place and receive calls will be smaller than with other phones.
Emergency (911) Service
If you need to make an emergency (911) call, power the phone on, dial 911, and press SEND. Emergency calls can be made regardless of lock setting.
Note: When you purchase your phone, the 9 key is programmed as a Super Dial key to call the emergency number 911. However, you have to enable this key assignment before you can use it.
Remember, to make or receive any call, the phone must be switched on and in a service area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network service and/or phone features are in use.
2 Safety First
PRELIMINARY
Safety Tips
Following the suggestions in this section will help ensure safe and efficient operation of your Panasonic phone.
This Model Phone Meets The Government’s Requirements For Exposure To Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.682 W/kg and when worn on the body, as described in this user guide, is 0.757 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.
Safety First 3
Loading...
+ 4 hidden pages