Panasonic 1549, 1548, 1550 User Manual

Fire alarm system

EBL512

1548, 1549 and 1550

• EBL512 -- an intelligent analog addressable fire alarm system

• Up to 512 addresses per control and indicating equipment (c.i.e.)

• TLON network for up to 30 c.i.e.:s

Analog addressable system

EBL512 is an intelligent analog addressable
fire alarm system, conforming to the EN54-2
and –4 standards.

Features / functions

The fire alarm system EBL512 meets the
most stringent requirements relating to fire
detection and alarm.

A user-friendly PC software Win512 is used
for site specific data editing, download,
backup and SW download.

Some features / functions:

• Adaptation of each analog detector's

alarm level in relation to its contamina­tion. Service signal when required.

• Algorithms for filtering and alarm, to

reduce nuisance alarms. Algorithm for
faster detection of smouldering fires.

• Functions, customer related: Test mode,

alert annunciation, disablements, etc.

• Functions: Fire door closing, inter-

locking combinations of outputs &
inputs, time channels, alarm delay, two­unit dependence, user definable text
message for each alarm point, etc.

• Programmable inputs and outputs and

a large number of trigger conditions.

• Expansion boards (options) with zone

line inputs or relay outputs.

• Interface (option) for ext. Fire brigade

panels, alert annunciation units, data
converters, etc.

Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: [phone] • Fax: [phone]
[e-mail] • www.panasonic-fire-security.com

Up to 512 addresses

EBL512 has the capacity of connecting 512
addresses. Basic configurations 128, 256 or
512 addresses. Can be upgraded on site.

Each c.i.e. has four COM loops for
connection of up to 512 loop units. Each
addressable loop unit uses one address.

Some loop units that can be connected:

• Analog detectors (sensors)

• Addressable manual call points

• Addressable short circuit isolators

• Addressable input and output units

• Addressable sirens & sounder bases

• Addressable external power supply units

• Conventional detectors and manual call

points

TLON Network

Up to 30 EBL512 c.i.e.:s can be connected
to a TLON network. A TLON connection
board 1590 is then required in each c.i.e.

Miscellaneous

EBL512 has space in the cabinet for two
sealed Lead Acid 24 (27) Ah batteries.

In each c.i.e. can be mounted up to six
expansion boards 1580-1587. The ext. FBPs
182x and the Alert Annunciation units 173x,
shall be connected via a 1587 board.

One Web-server II 1598 (option) connects
the EBL512 system to Internet / an Intranet
(LAN).

Type numbers

1548 EBL512 c.i.e., excl. printer, configured for 128, 256 or 512 addresses.
1549 EBL512 c.i.e., incl. printer, configured for 128, 256 or 512 addresses.
1550 EBL512 c.i.e., excl. front panel, excl. printer, configured for 128, 256 or 512

addresses.
1558 Printer board (option for 1548).
1572 Cabinet for drawings.
1580 8 zones expansion board (8 zone line inputs for conventional detectors).
1581 8 relays expansion board (8 programmable relay outputs).
1582 External FBP interface board (for connection of data converters and the "older"

types of ext. FBPs).
1583 German FBP interface board (for connection of a "Feuerwehr-Bedienfeld", incl.

a VdS Standardschnittstelle "Löschen").
1584 Autronica interface board (for connection of Autronica, BS100 units).
1585 Connection cable (male-male) for the 1580-1587 boards (no. 1->2 and no. 5->6).
1586 Connection cable (female-female) for the 1580-1587 boards (no. 3->4).
1587 External FBP / DU interface board (for connection of the newest types of display

units, e.g. ext. FBPs (1826 / 1828) and Alert Annunciation units (1735 /1736).
1590 TLON connection board (for TLON network). One board in each c.i.e.

Technical data

Voltage
primary (V AC)
secondary system (V DC)
Current consumption (mA) Depending on type (1548-1550), expansion board(s), etc. See EBL512

Ambient temperature (°C)
operating
storage
Ambient humidity (% RH) max. 90, non-condensing
Ingress Protection rating (estimated) IP32

Inputs 4 COM loops for 128, 256 or 512 addresses
4 programmable

Outputs 4 programmable supervised voltage outputs
2 programmable relay outputs
Relay outputs for routing equipment (Fire brigade tx and Fault tx)
Power supply (24 V DC) for routing equipment and external equipment

Size W x H x D (mm) 400 x 610 x 175
Weight (kg) 1548: 17.6 / 1549: 18 / 1550: 17.4
Colour (metal cabinet) Light grey (NCS S1500-N, PMS Cool Grey 2)
Approvals CE; Conforms with EN54-2 and -4. The front conforms with SS3654.

Note! All voltages are nominal.

230
24

Planning Instructions.

0 to +40

-40 to +70

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet Date of issue Revision / Date of revision

MEW00006 2000-05-12 6 / 2008-01-24