Palsonic TFTV325FL User Manual

OWNER'S MANUAL

80CM WIDE SCREEN LED-LCD TV / MONITOR

MODEL: TFTV325FL

N111

PALSONIC

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL:(02)9313 7111

FAX:(02)9313 7555

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA:1300 657 888

Contents

Important Information 3

Important Safety Precautions 4

Important Notice 6

Identification of Controls 7

Preparations 9

Making Connections 11

First Time Configuration / Basic Operations 15

Memorizing the Channels 19

Programme Edit 20

Adjusting the Picture

Adjusting the Sound

Adjusting Basic Settings/

Setting Clock & Timer 26

Setting Child and Rating Locks 28

Making Use of PVR recording Function 30

Teletext & Subtitle 34

Using USB Multi Media Player 35

Troubleshooting 38

Adjusting the Computer Image 25

Specifications 39

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

! Using cabinets or stands recommended by the manufacturer of the television.

! Only using furniture that can safely support the television.

! Ensuring the television is not overhanging the edge of the supporting

furniture.

! Not placing the television on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the television to a suitable support.

! Not standing the televisions on cloth or other materials placed between the

television and supporting furniture.

! Educating children about the dangers of climbing on furniture to reach

the television or its controls.

Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

Important Safety Precautions

Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your TV product, please read the following precautions carefully before using the product.

1. Read these instructions---All operating instructions must be read and understood before the product is operated.

2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.

3. Heed all warnings---

4. Follow all instructions---All operating instructions must be followed.

5.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not

recommended by the manufacturer. Use of improper attachments can result in accidents.

6. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.

7.Power cord protection--convenience receptacles, and the point where they exit from the apparatus.

NOTE: where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

8.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

9.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltages are present in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs.

a. When the power cord or plug is damaged.

b. When a liquid is spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.

e. If the product has been dropped or the cabinet has been damaged in any way.

f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing.

12. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

13. Safety checks---Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

14. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature.

All warnings on the product and in the instructions must be observed closely.

Protect the power cord from being walked on or pinched particularly at plugs,

Important Safety Precautions (Continued)

15. Stand---Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

16.Careful move---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.

Never attempt to move the TV unless the AC power cord has been disconnected.

17. Lightning---Unplug this apparatus during lightning storms or when unused for long periods of time.

For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

18. Do not use this apparatus near water---for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.

19. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

20. Ventilation---Do not block any ventilation openings. Install in accordance with the manufacturer instructions. The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for builtin installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

21.Heat sources---Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

The apparatus shall not be exposed to dripping or splashing

22.Panel protection---The display panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the display panel breaks.

23.Pixel defect---The display panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

WARNING: For continued safety, apparatus with class I construction shall be connected to a mains socket outlet with a protective earthing connection.

Important Notice

About Temperature

About After-Image

Do not use in hot and cold rooms (locations)

! When the unit is used in rooms (locations) with low temperature, the

picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

! Do not leave the unit in a hot or cold location. Also, do not leave the unit in

a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the to malfunction.

screen

! Storage temperature: 0°C to 50°C ! Working temperature: 5°C to 40°C

The extended use of fixed image programme material can cause a permanent on the screen.

This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible screen deterioration can be limited by observing the following steps:

A. Reduce the brightness/contrast setting to a minimum viewing level.

B. Do not display the fixed image for extended periods of time.

C. Turn the power off when not in actual use.

after-image

Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.

! Do not allow a still picture to be displayed for an extended period, as this

can cause a permanent after-image to remain on the screen.

Examples of still pictures include logos, video games, computer images,

teletext and images displayed in 4:3 mode.

Cleaning and Maintenance

CAUTIONS:

! The permanent after-image on the screen resulting from fixed image use

is not an operating defect and as such is not covered by the warranty.

! This product is not designed to display fixed images for extended periods

of time.

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

Use eyeglass cleaner to remove stubborn dirt from the screen.

Never use alcohol, paint thinner or benzine to clean this unit.

Before using a chemically treated cloth, read the instructions that came

with the cloth carefully.

Identification of Controls

Main Unit (Front View/Bottom View/Back View)

Front View/Bottom View

SOURCEMENU

CH VOL

1 2

SOURCE

3 4 5 6 7

uttons on the TV control panel (CH / ,

Note: B VOL+/-, MENU, SOURCE, POWER ) are touch buttons. First touch of the button will illuminate it. Second touch will fulfill its function. Be sure

button presses must be quickly done before the illumination disappears.

CH VOL

1. Remote sensor

Receives signals from the remote control.

Do not block.

2. Power indicator

Lights blue when in operating mode.

Lights red when in standby mode.

3. POWER

Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

4. SOURCE

To access SOURCE menu

5. MENU Press this button to access the main menu screen.

6. CH

Press these two buttons to directly change the TV channel;

In menu operations, also serve as up/down buttons.

7. VOL+

/–

Press the VOL+ or VOL– button to directly increase or

decrease the sound volume level;

In menu operations, also serve as right/left buttons.

8. Power Switch

Back View

RS- 232

HDM I 1 HDM I 2

7 8 9 11

AUDI O

D-S ub

PC IN RF

Y L R

COM PONEN T IN

AUDI O

1. Headphone & S/PDIF:

S/PD IF

USB

HDMI 3

Connect headphones to this jack.

Connect a digital sound system to this jack.

2. USB port: Connect a USB device to this port.

3. HDMI3: Connect an HDMI device to this jack.

AUDI OL R

AV OUT

VIDE O

AUDI OL R

AV IN

VIDE O

4. AV OUTPUT: Connect a VCR to these jacks to record

programs.

5. AV INPUT: Connect an AV device to these jacks.

6. RS-232: For service only. Do not use.

7. HDMI1: Connect an HDMI device to this jack.

8. HDMI2: Connect an HDMI device to this jack.

9. PC IN D-SUB/AUDIO: Connect a computer to these

jacks.

10. COMPONENT IN: Connect a component video device to these jacks.

11. RF: Connect an antenna to this jack.

Remote Control

3 4

11 12 13

Identification of Controls (Continued)

1. POWER : Switches the TV power on or Standby.

2. FREEZE: To freeze current picture.

3. FAV.LIST: Displays the favourite channel list.

4. S.MODE: Selects sound mode.

5. 0 – 9 number buttons: Press to enter channel numbers or input

password.

6. ASPECT: Selects the screen aspect ratio.

7. MENU: Displays the main menu screen.

8.5/6/3/4/OK: Press the arrows to navigate through the menus or adjust an item. Press OK to confirm a selection or enter a sub-menu.

9. EPG: Displays the Electronic programme Guide (DTV only).

10. VOL+/–: Increases or decreases the volume.

11. INFO: Displays the information banner.

12. : INSTANT RECORD/STOP button (PVR recording)

13. : Fast reverse

14. : Previous

15. SOURCE: Displays input source menu.

16. TV/RADIO: Switches between TV and Radio mode. (DTV only)

17. STEREO: Selects bilingual, stereo or mono (ATV only), or audio

track(DTV only).

18. P.MODE: Selects picture mode.

19. : Returns to the previous channel.

20. EXIT: Exits the menu screen.

21. LIST: Displays the channel list.

22. MUTE: Press to mute the sound. Press again to restore the sound.

23. CH5/6: Changes channel up and down.

24. T.SHIFT( ): time shift button;

Play/Pause button (when in time shifting or USB Media Play)

25.REC.LIST( ) button: Shows Recorded List; BACK button (USB

27 28

Media Play)

26. : Fast forward

27. : Repeat mode select (USB Media Play)

28. : Next

29. Coloured buttons (RED/GREEN/YELLOW/BLUE): Direct access

to the coloured items or corresponding pages. (Teletext)

30. Teletext control buttons

. TTX: Used to enter or exit teletext mode. (Teletext)

. Subtitle: Displays the subtitle; or the teletext subpage (Teletext)

. Hold: To stop or resume sub-page acquisition. (Teletext)

. Reveal: To reveal or hide the concealed information. (Teletext)

. Size: Press this button several times to display the upper, then the lower part of the screen and then return to the

normal size teletext page. (Teletext)

. Index: Press this button to view the main index page.(Teletext)

Press the button to display the Teletext on the screen with transparent background while viewing the TV

. Mix:

programme simultaneously

. Update: (Teletext)

Press the button to view the updated teletext page.

. (Teletext)

Preparations

Installing and removing the stand

If the stand is provided, please read these instructions thoroughly before attempting this installation.

You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column.

Cautions:

Make sure that you handle your TV very carefully when attempting assembly or removal of the stand. If you are not sure of your ability to do this, or of your ability to use the tools necessary to complete this job, refer to a professional installer or service personnel. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or improper assembly.

When using a table or bench as an aid to assembly, make sure that you put down a soft cushion or covering to prevent accidental scratching or damage to your TV's finish.

The speaker is not intended to support the weight of your TV. Do not move or handle your TV by the speaker. This can cause damage to your TV that is not covered by the manufacturer's warranty.

Before attempting assembly or removal of the stand, unplug the AC power cord.

To install the stand

1. Remove the stand from the box and place it on a table or bench.

You must pay attention to the direction of the stand. The wide

portion of the stand should go towards the front of the TV.

Table edge

Stand column

Stand

2. Lay your TV flat (screen down) on the edge of a table or

bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched.

3. Put the stand close to the TV back, align the stand with the stand column by moving the stand steadily, and align the screw holes on the stand column with the holes in the stand, then

Table edge

Secure with

four screws

secure the stand to the TV with provided screws .

To remove the stand from the TV, perform these steps in reverse order.

NOTE:

The appearance of this product in these illustrations may differ from your actual product, and is for comparative purposes only.

Preparations (Continued)

Using the Remote Control

Selecting a location

You should select a location for the TV:

·Where direct light does not reflect on the screen.

·That has indirect and soft lighting.

·Where the TV has access to an antenna or cable TV connection.

·Where the TV has access to a power outlet.

Note: Watching TV in total darkness or with a reflection on the screen may cause eyestrain.

Installing remote control Batteries

Battery precautions:

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

·Place batteries with their terminals corresponding to the (+) and (–)

·Different types of batteries have different characteristics. Do not mix

·Do not mix old and new batteries. Mixing old and new batteries can

·Remove batteries as soon as they are non-operable. Chemicals that leak

·Dispose of batteries in a proper manner.

·If the remote control is not used for an extended period of time, remove

·The batteries shall not be exposed to excessive heat such as sunshine, fire

Open the battery cover.

Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.

Replace the cover.

indications.

batteries of different types.

shorten the life of new batteries and/or cause old batteries to leak chemicals.

from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

the batteries.

or the like.

Aiming the remote control

Use the remote control by pointing it towards the remote sensor on the front of your TV. Objects between the remote control and the remote sensor may prevent proper operation.

Cautions regarding use of remote control

·Do not expose the remote control to shock. In addition, do not expose the

remote control to liquids, and do not place in an area with high humidity.

·Do not install or place the remote control under direct sunlight. The heat

may cause deformation of the unit.

·The remote control may not work properly if the remote sensor window

of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or the TV set, or operate the remote control closer to the remote sensor window.

Making Connections

Before you make any connections

Cautions Before Connecting

=When connecting an external device to the TV, make sure that the TV and the device are turned off. =Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on

the TV.

=Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. =The illustration of the external device may be different depending on your model. =Refer to the operating manual of the external device as well.

Antenna connections

·Connect one end of your antenna cable to the RF jack on the back of

the TV, then connect the other end of the cable to the antenna wall jack.

75-ohm coaxial cable

(round cable)

Power connection

Household power outlet

AC cord

Note:

=It is recommended that the 75-ohm coaxial cable be used to eliminate

interference and noise which may occur due to radio wave conditions.

=The antenna cable should not be bundled with the power cord and the like.

=If the antenna is not installed properly, contact your dealer for assistance.

Connect the power cord to a power outlet.

Note:

=This product should be operated only from the type of power source indicated

on the marking label.

=Always unplug the AC cord from power outlet when not using for a long period

of time.

=This illustration is for reference only. The AC plug may be different on different

models.

Making Connections (Continued)

Headphone connection

TV Side

Headphones

To connect headphones:

Insert the plug of the headphone into the TV’s Headphone jack. When using headphones, adjust the headphone volume so as to avoid excessive levels, as hearing damage may result.

USB connection

To USB port

TV Side

Insert your USB device into the USB port.

To play from the USB device:

1. Turn on your TV, then press SOURCE button. The Input Source

2. Press 5or6to select USB, then press OK to confirm.

Never remove the USB device or turn off the TV while using the USB device.

Digital sound system connection

TV Side

Optical

cable

menu opens.

For a full Home Theater sound experience, you must connect your digital sound system to the S/PDIF OUT( ) jack on the TV.

Mini-TOSLINK

S/PDIF IN

(optical)

Digital sound system

Note:

! To connect to the S/PDIF OUT (Mini-TOSLINK) jack, a

Mini-TOSLINK adapter is required to connect an Optical Cable to this jack.

! The headphone output and S/PDIF OUT share the same jack.

So when you want to use S/PDIF, please disconnect your headphone, and vice versa.

+ 28 hidden pages