Palsonic TFTV2035BK User Manual

LCD TV/DVD COMBO
TFTV2035BK
USER'S MANUAL

Table Of Contents

Important Safety Instructions -------------------------------------------------------­Disc Information --------------------------------------------------------------------------­Front Panel --------------------------------------------------------------------------------­Rear Panel ----------------------------------------------------------------------------------­Remote Control --------------------------------------------------------------------------­System Connections -------------------------------------------------------------------

Connecting Power Supply -----------------------------------------------------------­Connecting to Earphone -----------------------------------------------------------------­Connecting to External AV Signal Source -------------------------------------------­Connecting to External AV Signal Source (YPbPr) ------------------------------­Connecting to External AV Device (AV Output) -----------------------------------­Connecting to PC --------------------------------------------------------------------------­Connecting to TV Antenna ---------------------------------------------------------------

TV Function ---------------------------------------------------------------------------------

Preparations ---------------------------------------------------------------------------------

2
4
5
6
7

10

10
10
11
11
12
13
14

15

15
Image Setting -------------------------------------------------------------------------------­Audio Setting -------------------------------------------------------------------------------­Timer Setting -------------------------------------------------------------------------------­Setup Setting --------------------------------------------------------------------------------

NICAM Function --------------------------------------------------------------------------­DVD Playback Operation --------------------------------------------------------------­USB and SD/MS/MMC Card Function ---------------------------------------------­DVD System Setup ----------------------------------------------------------------------­Troubleshooting --------------------------------------------------------------------------­Specifications ------------------------------------------------------------------------------

15

18

19

20

23

24

29

30

37

38

1

Important Safety Instructions

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

CAUTION: Laser radiation when open. Do note stare into
beam.

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION

1.

The product contains a low-power laser device. In order to ensure the safety of the laser device,
do not remove any cover and attempt to repair the unit. If any service is needed, please contact
the distributor or its authorised service centre.

2.

To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall
outlet before servicing or when it is unused for a long period of time.

3.

The manufacturer should not hold responsibility for the damage caused by any substitutions
and modifications of the product without authorisation from the manufacturer or authorised unit.

4.

Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.

WARNING

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.

The images in this manual are only for referencr and they may be different
from the actual ones.

2

Important Safety Instructions

NOTES

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus
near water.

6.

Clean only with a dry cloth.

7.

Do not block any ventilation openings. Maintain well ventilated conditions around the product.
Do not put product on bed, sofa or anything that blocks ventilation. Install in according to the
manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9.

Read, heed and follow all instructions to ensure correct and safe installation and
inter-connection of the apparatus.

10.

The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.

11.

The mains socket outlet shall be installed near the apparatus and the mains plug shall remain
readily operable.

12.

Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

13.

Only use attachments/accessories specified by the manufacturer.

14.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

15.

Unplug this apparatus during lightning storms or when unused for long periods of time.

16.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

17.

The apparatus shall be connected to a mains socket outlet with a protective earthing
connection.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and interlock

failed or defeated. Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit. Leave all servicing to
qualified service personnel.

Note: Do not touch the colour TFT LCD screen by hand directly.

Copyright Protection

This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorised
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorised by Macrovision. Reverse engineering or disassembly is prohibited.

3

Disc Information

Discs Supported

DISC LOGO CONTENTS SIZE MAXIMUM TIME

DVD

Audio+Video

(active picture)

12cm

133min(SS-SL)
242min(SS-DL)
266min(DS-SL)
484min(DS-DL)

CD

JPEG Still high resolution 12cm

DIVX

Operating systems and features of individual DVD discs is specified by the software maker.
Please refer to the instructions accompanying the disc.

Audio 12cm 74min

12cm

Disc Terms

Titles

A DVD disc is often divided into TITLES. A title can be a separate item or a segment of a film. on
many disc the ROOT menu and the TITLE menu are the same.

Chapters

Each TITLE is subdivided into CHAPTERS and each chapter is numbered for easy searching.
So by knowing the right command, you can play the whole disc, or any part of the disc.

Tracks

Picture and music CDs are divided into TRACKS. Each track is numbered for searching.

4

View of Unit

Front and Right Side Panel

8

2

1.

Colour TFT screen

2.

Speakers

3.

Power Indicator

During work, it is blue; in standby mode, it
is red.

4.

Remote Sensor

5.

SOURCE button

Press repeatedly to select TV,
COMPOSITE, S-VIDEO, COMPONENT,
VGA or DVD mode.

6.

MENU button

Press to enter or exit system setup menu.

7.

CH button

Press to select channels in TV mode. On
system setup menu, the same function as
direction buttons.

8.

VOL button

Press to decrease or increase the volume.

2

On system setup menu, the same function
as / direction buttons.

9.

PLAY button
Press to start disc playback in DVD mode.

10.

STOP button
Press to stop disc playback in DVD mode.

11.

Eject button
Press to eject disc out the unit.

12.

Power button

Press to enter or exit standby mode.

13.

SD/MS/MMC Card Port

Insert SD/MS/MMC card into this slot.

14.

Disc Tray Slot

Insert disc into this slot.

15.

Earphone Jack

Connect earphone.

16.

USB Port

Connect USB device.

5

View of Unit (Continued)

Back Panel

Open the back cover on the right side of the unit's rear panel, and you will see all jacks, as shown
below:

TV

1.

Y/Pb/Pr Input Jacks

Connect Y/Pb/Pr signal source in
COMPONENT mode.

2.

L/R Audio Input Jacks (for Y/Pb/Pr)

Connect L/R audio signal source in
COMPONENT mode.

3.

AV Output Jack

Output TV or COMPOSITE signals to
external AV input device.

4.

L/R Audio Output Jacks

Output L/R audio signal to external AV
input device.

5.

L/R Audio Input Jacks (for composite
and S-video)

Connect L/R audio signal source in
COMPOSITE or S-VIDEO mode.

PC IN

AUDIO

6.

S-Video Input Jack

Connect S-Video signal source in
S-VIDEO mode.

7.

Composite Video Input Jack

Connect composite video signal source in
COMPOSITE mode.

8.

TV Signal Input Jack

Connect TV aerial.

9.

DC 12V Input Jack

Connect supplied adaptor.

10.

PC Input Jack

Connect VGA signal source.

11.

PC Audio Input Jack

Connect VGA audio signal source.

6

Remote Control

View of Remote Control

1

2

3
4

5

6

7
8

9

10

11

12
13

14

15
16
17

18
19

20
21

1.

POWER button

Press to enter or exit standby mode.

2.

TV button

Press to shift to TV mode.

3.

DVD button

Press to shift to DVD mode.

4.

P.M. button

Press to shift the screen picture modes to
different brightness settings: User,
Standard, Soft, Bright and Shine.

5.

S.M. button

Press to shift the sound modes to different
sound settings : User, Standard, Music,
Movie and Speech.

6.

0-9 Number buttons

22
23

24
25

Press to select numbers.

7.

FAV button

Press to shift to the favourite channel

8.

STEREO/AUDIO button

In TV mode, press to select sound track
when receiving NICAM or A2 TV broadcast
signal; in DVD mode, press to select audio
language or audio track.

9.

26

VOL+/- button

Press to increase or decrease the volume.

27
28
29

10.

MUTE button

Press to turn on or off speaker output

11.

EXIT button

Press to exit from the setup menu.

30

12.

Direction buttons ( )

In the setup menu, press the button to
select items and press the button to

31

32
33

34
35

36
37

38

adjust or set.

13.

ENTER button

Press to confirm selection.

14.

SOURCE button

Press repeatedly to select TV,
COMPOSITE, S-VIDEO, COMPONENT,
VGA and DVD.

15.

PLAY button
Press to play the disc in DVD mode.

16.

PAUSE button

Press to pause playback and press the
PLAY button to resume normal playback
during disc playback.

17.

/ button

Press to activate fast backward or forward
playback function in DVD mode.

18.

TITLE button

When a DVD disc is playing, press the TITLE
button to go to the title menu and display
disc contains.
Under TV, Composite or S-VIDEO mode,
press to display/close the teletext.

7

Remote Control

MENU button (under DVD mode)

19.

Press to enter disc menu in DVD mode;
press to exit teletext mode in teletext
mode

SETUP button

20.

Press to enter or exit setup menu in DVD
mode; press to display the index page in
teletext mode.

SLOW button

21.

Press to activate slow playback function in
DVD mode. In teletext mode, press to
display the concealed information, such as
solution to puzzles; press again to
conceal the information.

D-SUB button

22.

Press to shift to VGA mode.

YPBPR button

23.

Press to shift to COMPONENT mode.

DISPLAY button

24.

Press to display the reference information
about the current program.

SET FAV button

25.

Press to set current channel as the
favourite channel.

/+10 button

26.

Press to return to the previously viewed
channel in TV mode; press to select
numbers greater than 10.

SCAN button

27.

Press to scan programs in TV mode and
press again to stop scanning.

CH+/- button

28.

Press to select channel in TV mode.

SUBTITLE button

29.

Press to select subtitle language if the disc
contains multi-subtitle languages during
disc playback.

MENU button

30.

Press to enter or exit the system setup
menu.

SLEEP button

31.

Press the button and then the ENTER
button to activate Sleep function. The use
the button to select sleep time after
which the unit will be turned off automatically.

32.

Eject button

Press to eject the disc from the unit.

33.

STOP button
Press to stop disc playback in DVD mode.

34.

/ button
Press to go to the previous or next
list/chapter/track in DVD mode.

35.

REPEAT button

Press to repeat chapter, title, or all content
when in DVD mode; press to stop all automatic
changing of the page consists of two or
more sub pages in teletext mode.

36.

ANGLE button

Press to select camera angles if the disc
contains multiple camera angles during
disc playback; in teletext mode, press the
button first time to double the size of
teletext letters in the upper half of the
screen, second to double the size of
teletext letters in the lower half of the
screen and third to resume normal status.

37.

CARD button

Press to shift among disc playback, USB
playback and SD/MS/MMC playback mode
when USB device or card is connected to
the unit in DVD mode; in teletext mode,
press to select four groups 3-digit numbers
that displayed in different colours at the
bottom of the screen. Press the coloured
buttons on the remote control to select,
then use the number buttons to input the
corresponding number to display the page.
Repeat the above procedures for each
page to be stored, using a different colour
button accordingly each time.

38.

GOTO button

Press to select title or chapter, playback time,
etc. in DVD mode.
Press to display the real clock and press
the EXIT button to exit under TV mode.

8

Remote Control

Preparation of Remote Control

Softly push the back cover to open the battery
compartment.

Insert two batteries 1.5V, size AAA), please
make sure the polarity matches the marks
inside the compartment.

Using of Remote control

Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.

7M

Softly press the back cover to close it.

Under normal use the battery will last for
six months.
Take out battery when the remote is not in
use for a long time.

The operating distance may vary
depending to the brightness around.

Notes:

Do not point bright lights directly at the
remote control sensor.
Do not place objects between the remote
control unit and the remote control sensor.
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.

9

System Connections

Do not connect the power cord until all other connections have been made.
Ensure that you observe the colour cables when connecting audio and video cables.
Before connecting, open the cover on the right side of the unit's rear panel.

Connecting Power Supply

Power is supplied through the provided power adapter. Connect one end of the adaptor to the unit's
power jack on the jack panel of the unit and the other end to the wall AC outlet.

TV

To wall AC outlet

PC IN

AUDIO

Connecting Earphone

Connect earphone (headphone) to earphone jack on the rear panel of the unit for listening.

After connecting earphone, the internal speaker output will turn off automatically.
Note: Excessively loud volume could damage your hearing. So turn down the volume before
connecting earphone, and then raise the volume to comfortable level.

10

System Connections (Continued)

Connecting External AV Signal Source

Use the AV cables to connect external AV signal source to AV input jacks on the jack panel of the
unit. And use the S-Video cable to connect external S-Video signal source to the S-VIDEO input
jack on the rear panel of the unit.

AV SIGNAL SOURCE

TV

PC IN

AUDIO

After connection, turn on the unit and the external AV signal source and press the SOURCE button
to shift to COMPOSITE or S-VIDEO mode.

Note: Normal composite Video and S-VIDEO share audio input jacks.

Connecting External AV Signal Source (YPbPr)

Use the AV cables to connect external AV signal source to the Y/Pb (Cb) /Pr (Cr) input jacks on the
jack panel of the unit.

AV SIGNAL SOURCE

TV

PC IN

AUDIO

After connection, turn on the unit and external AV signal source and press the SOURCE button to
shift to COMPONENT mode.

11