Important Safety Instructions -------------------------------------------------------Characteristic Features ---------------------------------------------------------------Disc Information --------------------------------------------------------------------------View of Unit -------------------------------------------------------------------------------Remote Control---------------------------------------------------------------------------System Connections -------------------------------------------------------------------
Connecting to Power Supply -----------------------------------------------------------Connecting to TV Antenna --------------------------------------------------------------Connecting to External AV Signal Source -------------------------------------------Connecting to Earphone -----------------------------------------------------------------Connecting to PC ---------------------------------------------------------------------------
TV Function ---------------------------------------------------------------------------------
NICAM Function --------------------------------------------------------------------------DVD Playback Operation --------------------------------------------------------------DVD System Setup ----------------------------------------------------------------------Troubleshooting --------------------------------------------------------------------------Specifications ------------------------------------------------------------------------------
18
18
22
23
28
34
35
Important Safety Instructions
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION: Laser radiation when open. Do note stare into
beam.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION
1.
The product contains a low-power laser device. In order to ensure the safety of the laser device,
do not remove any cover and attempt to repair the unit. If any service is needed, please contact
the distributor or its authorised service centre.
2.
To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall
outlet before servicing or when it is unused for a long period of time.
3.
The manufacturer should not hold responsibility for the damage caused by any substitutions
and modifications of the product without authorisation from the manufacturer or authorised unit.
WARNING
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Copyright Protection
The product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorised
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorised by Macrovision, Reverse engineering or disassembly is prohibited.
1
Important Safety Instructions
Note:
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus
near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Maintain well ventilated conditions around the product.
Do not put product on bed, sofa or anything that blocks ventilation. Install in according to the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.
Read, heed and follow all instructions to ensure correct and safe installation and
inter-connection of the apparatus.
10.
The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
11.
The mains socket outlet shall be installed near the apparatus and the mains plug shall remain
readily operable.
12.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
13.
Only use attachments/accessories specified by the manufacturer.
14.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
15.
Unplug this apparatus during lightning storms or when unused for long periods of time.
16.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
17.
The apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit. Leave all servicing to
qualified service personnel.
Note: Do not touch the colour TFT LCD screen by hand directly.
2
Characteristic Features
This product incorporates DVD player, LCD display and TV receiver in one system.
Multiple Mode
TV mode
COMPOSITE mode
S-VIDEO mode
VGA mode
DVD mode
High Quality Property
High Resolution
Adopt an MPEG2 decoding format to achieve
horizontal resolution more than 500 lines.
LCD (Liquid Crystal Display)
Designed with colour TFT liquid crystal display
clearly shows the data.
NICAM Function
Supports the NICAM function. According to the
broadcasting programs, you can choose the
corresponding soundtrack
Advanced Playing Features
Compatibility
DVD, CD, and JPEG discs compatible.
All Playback Functions
Fast forward and reverse, slow playback and
repeat playback
Special Playback
Support multi-angle, multi-language and
multi-subtitle playback.
Stereo Amplifier
Built-in two speakers provide high quality
sound.
AV and VGA Input
Can be connected to external audio and video
signal source and PC.
Special Function
Support sleep time setting function and favourite
channel setting function, etc.
Multi Audio and Multi-video modes
Support multi-audio and multi-video modes,
provides more selecting.
Auto TV Searching Function
NOTE: It is normal for a TFT screen to
experience some light or dark spots appearing
on the LCD screen.
Can be connected to the TV antenna, supports
Auto and manual TV programs searching
function.
The operating method of some DVD discs is specified by the software maker. Please refer to
the instruction manual of the disc.
Audio12cm74min
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of
one or more chapters and each of them is numbered for easy searching. But some discs may not
have a recording chapter.
Track
A segment of picture or music on a CD. Each track is numbered for searching.
4
Front Panel
Front and Side Panel
1. 15" colour TFT screen
15" colour TFT screen clearly shows the data.
2. Power Indicator
In normal playback status, it turns green; in standby mode, it turns red.
3. Remote sensor
Remote sensor window for the remote control.
4. Speakers
Two speakers output high quality stereo sound.
5. Disc Tray Slot
Used to load disc.
5
Top Panel
Top
Panel Drawing
k
j
1. Input button
Press to modes modes among TV, COMPOSITE, S-VIDEO, VGA and DVD.
In setup menu, the same function as OK button.
2. MENU button
Press to enter or return to the previous setup menu.
3. CH / button
While in TV mode, press to select channels
In setup menu, the same function as , direction button.
4. VOL / button
In TV mode, press to decrease or increase the volume in DVD mode.
In setup mode, the same function as , direction button.
5. PLAY button
Press to play the disc in DVD mode.
6. Stop
Press to stop playback in DVD mode.
7. EJECT button
Press to eject the disc out.
8. POWER button
Press to enter or exit standby mode.
l
m
n
o
pq
6
Rear Panel
Rear Panel Drawing
1
2
3
4
5
78
6
1. DC 12V Power Supply Cord
Connect the power supply adaptor or the car adaptor
2. VGA Input Jack
Connected to the VGA output jack on a personal computer.
3. PC Audio Input Jack
Connected to the PC audio output jack.
4. S-Video Input Jack
Connected to the S-VIDEO input in S-VIDEO.
5. L/R Audio Input Jacks
Connected to L/R audio input in both S-VIDEO or COMPOSITE mode.
6. Video Input Jack
Connected to the VIDEO input in the COMPOSITE mode.
7. Earphone Jack
When connected to earphone, the internal speakers will automatically turn off.
8. TV Signal Input Jack
Connected for the external TV signal input.
7
Remote Control
Preparation of Remote ControlUsing of Remote Control
Refer to the drawing and remove the empty
battery receptacle.
Insert the battery into the receptacle. Make
sure the polarity matches the marks inside the
component.
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
Insert the receptacle into the remote control.
••Under normal use the battery will last for
six months.
Take out battery when the remote is not in
use for a long time.
• The operating distance may vary
depending to the brightness around.
Notes:
•
Do not point bright lights directly at the
remote control sensor.
•
Do not place objects between the remote
control unit and the remote control sensor.
•
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.
8
Remote Control
Remote Control Drawing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1. POWER button
Press to enter to or exit the standby mode.
2. Input button
Press to select mode among TV, COMPOSITE,
S-VIDEO, VGA, and DVD.
3. CH+/- button
When in TV mode press to select
channel.
4. VOL + /-
Press to increase or decrease the speaker
volume level.
5. button
When in TV mode, press to return to the
channel previously viewed.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
6. +10 button
Select track number greater than 9, in DVD
mode.
7. Direction buttons ( )
In the setup menu, press the button
to select a desired item and press
buttons to adjust or set.
8. OK button
Press to confirm the selection.
9. P.M. button
Press to shift the screen picture modes
among User, Standard, Soft, Bright and
Shine.
10. Play button
Press to play a disc when in the DVD
mode.
11. Stop
Press to stop disc playback when in DVD
mode.
12. Skip
Press to skip to the previous chapter/track
when in DVD mode.
Under Teletext mode, it's the teletext colour
button.
13. Next Skip
Press to skip to the next chapter/track when in
DVD mode.
Under Teletext mode, it's the teletext colour
button.
14. TITLE button
When a DVD disc is playing, press the TITLE
button to go the title menu and display
disc contents.
Under TV, COMPOSITE or S-VIDEO
mode, press display/close the teletext.
15. MENU button
Press to enter disc menu when in DVD
mode.
Under Teletext mode, press to disable
teletext display and press again to
resume.
16. REPEAT button
Press to repeat a chapter, track, title, or all
program content when in DVD mode.
Under Teletext mode, press to display
index page.
9
Remote Control
17. ZOOM button
Press to activate zoom function.
Under Teletext mode, press once to
display the concealed information, such
as solution of riddles or puzzles; press
again to resume riddles information
from display.
18. INFO. button
Press to display reference information
of the current program.
19. MUTE button
Press to turn on or off speaker output.
20. 0~9 number buttons
Press to select numbers such as TV
Channel.
21. -/--/+10 buttons
When in TV mode, press to select 1-digit
or 2-digit channel number and then use the
number button to select channel.
When in DVD mode, press to select
numbers greater then 10.
22. button
This feature allows you to set up sleep
time when in TV mode. Press the button
and then the "Sleep Time" window will
appear on the left top of the screen. Then
press the OK button to enter setup
and the button to select the
sleep time "Off" to close this function.
23. STEREO button
Press to shift sound track when in TV
mode.
24. EXIT button
Press to exit from menu setup.
25. Eject button
Press to eject the disc from the unit.
26. DVD SETUP button
Press to open DVD setup menu when in
DVD mode.
27. GOTO button
Press to select the desired disc starting
time, title or chapter when in DVD mode.
28. button
Press pause playback or start step frame
by frame playback.
29. button
Press to search forward when in DVD
mode.
30. button
Press to search backward when in DVD
mode.
Under Teletext mode, it's the teletext colour
button.
31. AUDIO button
Press to select audio language or audio
track when in DVD mode.
Under Teletext mode, press to freeze the
current page and press again to resume.
32. SUBTITLE button
Press to select alternate subtitle
languages during playback of a multiple
language DVD disc when in DVD mode.
Under Teletext mode, press button first
time to double the size of teletext letters in the
upper half of the screen, second to
double the size of the teletext letters in the
lower half of the screen and third to
resume normal status.
32. ANGLE button
Press to access various camera angles (if the
DVD disc contains multiple camera angles)
when in DVD mode.
Under Teletext mode, press to select four
groups 3-digit numbers that displayed in
different colours at the bottom of the screen.
Press the colour buttons on the remote
control to to select, then use the number
buttons to input the corresponding number
to display the page.
Repeat the above procedures for each
page to be stored, using a different colour
button accordingly each time.
34. SLOW button
Press to activate slow playback function
when in DVD mode.
Under TV mode, press to display the
real clock and press the EXIT button to
exit.
10
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.