Palsonic PW237SFR Product Manual

PW237SFR

237 Litre Refrigerator

Contents

1. SAFETY WARNINGS ............................................................................................................ 1

2. INSTALLTION ...................................................................................................................... 2

2.1 Location ...................................................................................................................... 2

2.2 Reversing the Door Swing .......................................................................................... 2

2.3 Door Space Requirements .......................................................................................... 6

2.4 Levelling the Unit ....................................................................................................... 6

2.5 Cleaning Before Use ................................................................................................... 6

2.6 Before Using Your Unit ............................................................................................... 6

2.7 Interior Accessories .................................................................................................... 7

3. PRODUCT OVERVIEW ........................................................................................................ 7

4. OPERATION ........................................................................................................................ 8

4.1 Switching On Your Unit .............................................................................................. 8

4.2 Noise Inside the Unit! ................................................................................................. 8

4.3 Tips for Keeping Food in the Unit ............................................................................... 8

5. CLEANING .......................................................................................................................... 8

5.1 Cleaning the Interior and the Exterior of the Unit ..................................................... 8

5.2 Cleaning Tips .............................................................................................................. 9

6. MAINTENANCE .................................................................................................................. 9

6.1 Care When Handling / Moving Your Unit ................................................................... 9

6.2 Servicing ..................................................................................................................... 9

6.3 Switching Of for Long Periods of Time ....................................................................... 9

7. Trouble shooting ............................................................................................................... 9

7.1 Warm tips ................................................................................................................. 10

8. TIPS FOR ENERGY SAVING ............................................................................................... 10

9. DISPOSAL ......................................................................................................................... 10

2. INSTALLTION

2.1 Location

When selecting a position for your unit you should make sure the floor is flat and firm, and the

room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator.

Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold ambient

temperatures may also cause the unit not to perform properly. This unit is not designed for use in

a garage or outdoor installation. Do not drape the unit with any covering.

When installing the unit, ensure that 10cm of free space is left at both sides, 10cm at the rear

and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and

improve the efficiency of the cooling process.

2.2 Reversing the Door Swing

Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner

1) Remove the right top hinge cover.

2) Remove the screws fixed the top-hinge with cross-slot screwdriver.

2

3) Remove the hinge shaft sleeve and the door block to the other side.

A. Remove the nut with sleeve. Take off the washer then remove the axes to the other

side and fixed.

3