Paladin Tools NEG-301A User Instructions
MODEL NO.: NEG-301A
ELECTRONIC
HEAT GUN
USER INSTRUCTIONS
FEATURES OF HEAT GUN
1 2 3
1. Nozzle
2.
Heat guard
3.
Cool air intake
4. Temperature
5. Switch
6.
Handle
7.
Hanger
8.
Power cord
control
4
5
6
7
8
VARIABLE TEMPERATURE CONTROL
1
IMPORTANT SAFETY INSTRUCTIONS
Before starting work, please take a few minutes to carefully read all Instructions. Pay close
attention to safety guidelines and warnings included for your protection. Save these instructions for
future use.
WARNING
!
To reduce risk of fire or electric shock , do not expose to rain or moisture. Store indoors.
Read instruction manual before using.
!
Nozzle gets extremely hot. Wear gloves and eye protection.
!
For safe operation, read manual thoroughly.
!
When servicing, use only identical replacement parts.
!
NEVER USE THE HEAT GUN AS A HAIR DRYER!
!
Never direct the hot airflow toward people or animals.
!
Never use the heat gun near flammable materials or gases.
!
Never obstruct the hot airflow by blocking or covering the air outlet. Never Touch the hot air
nozzle.Itbecomes extremely hot.
!
Wear protective work gloves at all times.
!
Never touch the nozzle to any surface when running the gun or shortly after running.
!
Always wear eye protection when removing paint from overhead position.
!
Do not wear loose-fitting clothing or jewelry. Wear nonskid footwear and a protective hair
coveringtocontain long hair.
!
Maintain proper balance and footing at all times.
!
Keep the gun handle dry, clean and free from oil and grease.
!
Do not force the tool or accessories and use only for the purpose intended.
!
Always stand gun in an upright position or hang it up by its convenient hanger.
!
Never use the tool in wet environments or areas of high humidity (for example: bathroom,
steamrooms,etc.).
!
Never use the gun in the rain or on extremely damp days.
!
Never poke anything down inside the hot air nozzle.
!
Always allow the heat gun to cool down completely before storing it.
!
Always store the gun in a safe place, out of the reach of children. IT IS NOT A TOY.
!
Know the work environment. Areas behind ceilings, floors and soffits may contain highly
flammablematerials.Always check these areasbeforeapplying heat.
!
Keep work area clean and uncluttered.
!
Keep work area well lighted.
!
Keepchildrenand visitors away from workarea,the tool, and extension cords.
!
Guard against electric shock by preventing contact, with grounded surfaces (for example: pipes,
radiators, ranges and refrigerator enclosures.)
!
Never carry the gun by its power cord or yank the cord from an electrical outlet.
!
Useonlyproper rated extension cords. (Seefollowingsections.)
!
Inspectextensioncords periodically and replace ifdamaged.
2
Loading...