OZTI OFGI 4090, OFGI 8090, OFGI 4070, OFGI 8070 User Manual

PRODUCTION YEAR:

SERIAL NO:

PRODUCTION SITE : Beylikdüzü Eski Hadımköy Yolu 1.Km Büyükçekmece İstanbul/TÜRKİYE

Phone : [phone] (8 Hat-Lines) Fax : [phone]

Published on : 01.01.2013

VER:V13.01 1/16

FRYER (GAS)

USER’S MANUAL

Our website: www.oztiryakiler.com e-mail: [e-mail]

MANUFACTURER : ÖZTİRYAKİLER MADENİ EŞYA SAN. VE TİC A.Ş.

- 1783

TABLE OF CONTENTS

2/16

PAGE NR. TOPICS

1 COVER PAGE

2 TABLE OF CONTENTS

3 INTRODUCTION
4 TECHNICAL DATA

5 MAIN DIMENSIONS AND WARNING SIGNS

6-7 SAFETY DETAILS

8 TRANSPORTING AND MOVING

9-10 INSTALLATION OF THE APPLIANCES

11 CONTROL BOARD

12-13 OPERATION OF THE APPLIANCES

14 CLEAN-UP AND MAINTENANCE
15 CHANGING THE GAS SYSTEM

16 TERMS OF WARRANTY

INTRODUCTION

☞ Please read and ensure that your operation personnel also reads this user’s

manual care fully before installing and using the appliance. If the appliance is

operated without reading the user’s manual, the appliance will not be covered

by the warranty.

☞ The manual containing information about installation, usage and maintenance

of our product you purchased should be read carefully. Please ensure that
power supply connections to the appliance are already installed by qualified
personnel according to local legislation, before our authorized service
personnel arrives for the installation of the appliance.

☞ If you are confused or you don’t have enough information
please get in touch with authorized service by phone.

☞ Please keep in mind that, if the service personnel is delayed
at your site, related expenses and delay costs will be charged to
you on hourly basis.

☞ We hope that you will get the best performance from our product…

Dear User,

Thank you for purchasing our appliance and for your reliance upon our
company. Our appliances are used in professional kitchens in 75 countries.
Our appliances are produced in compliance with international standards.

Important notice: Please read and ensure that the users read this user’s

manual in order to achieve the desired performance in line with your
expectations and to use your appliance for long years. Please take the
warnings mentioned above into consideration before calling for service...

3/16

TECHNICAL DATA

4/16

YOUR

PRODUCT'S TYPE

☞

OFGI 4090

OFGI 8090

OFGI 4070

OFGI 8070

MAIN

DIMENSIONS

(mm)

400X900X 850 800х900х 850 400x700x850 800x700x850

HEAT POWER

(KW) (H

İ

) ΣQ

N

22 2x22=44 10 2x10=20

TYPE

А

1

А1 А1 А1

GAS INLET (inch)

½” R ½” R ½” R ½” R

THERMOSTAT

(ºС)

110-190 110-190 110-190 110-190

SAFETY

THERMOSTAT

(ºС)

230

230

230

230

CAPACITY

22 22+22=44 12 12+12=24

FRYING
CAPACITY

Maximum
(kg/batch)

3 6 2 4

MAIN DIMENSIONS AND WARNING SIGNS

Figure 1: Main Dimensions and Warning Signs

5/16

HOT SURFACE

SAMPLE LABEL

☞ MODEL OFGI 4090