OZTI OBM 1080 D, OBM 1080 D PLUS, OBM 1080 DS User Manual

PRODUCTION YEAR: SERIAL NO :

1/19

DISHWASHERS

USER’S MANUAL

MANUFACTURER : ÖZTİRYAKİLER MADENİ EŞYA SAN. VE TİC A.Ş.
PRODUCTION SITE : Beylikdüzü Eski Hadımköy Yolu No:8 Büyükçekmece İstanbul/TÜRKİYE

Phone : [phone] (8 Hat-Lines) Fax : [phone]

Our website: www.oztiryakiler.com.tr e-mail: [e-mail]

ozti

Models:
1-)OBM 1080 D
2-)OBM 1080 DS
3-)OBM 1080 D PLUS

TABLE OF CONTENTS

PAGE

TOPICS

1 COVER PAGE
2 TABLE OF CONTENTS

3 INTRODUCTION
4 TECHNICAL DATA

5 WARNING SIGNS

6 - 7 SAFETY Detaıls

8 TRANSPORTING AND MOVING

9-10-11 INSTALLATION AND ELECTRICAL CIRCUIT DIAGRAM

12-13-14 OPERATION OF THE MACHINE

15-16 CLEAN-UP AND MAINTENANCE

17 USER’S RESPONSIBILITIES
18 TROUBLESHOOTING

19 TERMS OF GUARANTEE

2/19

CAUTION

This device should only be used in facilities where relevant standards,

laws and safety requirements are complied with

INTRODUCTION

☞ Please read and ensure that your operation personnel also reads this

user’s manual carefully before installing and using the device. If the
device is operated without reading the user’s manual, the device will not

be covered by the guarantee.

☞ The manual containing information about installation, usage and

maintenance of our product you purchased should be read carefully.
Please ensure that power supply connections to the device are already
installed by qualified personnel according to local legislation, before our
authorized service personnel arrives for the installation of the device.

☞ If you are confused or you don’t have enough information

please get in touch with authorized service by phone.

☞ Please keep in mind that, if the service personnel is delayed

at your site, related expenses and delay costs will be charged to
you on hourly basis.

☞ We hope that you will get the best performance from our product…

Dear User,

Thank you for purchasing our device and for your reliance upon our company.
Our devices have been used within our customers kitchen, your kitchen in 75
countries. Our devices are produced in compliance with international

standards. Important notice: Please read or ensure that the users read this user’s

manual in order to achieve the desired performance in line with your
expectations and to use your device for long years. Please take the warnings
mentioned above into consideration before calling for service...

3/19

TECHNICAL DATA

4/19

Technical Data OBM 1080 D OBM 1080 DS OBM 1080 D PLUS

TOTAL ELECTRICAL INPUT (KW) 9,66 9,66 9,66

SUPPLY VOLTAGE (VAC) 400 400 400

WORKING FREQUENCY (Hz.) 50 50 50

POWER SUPPLY CABLE (Number of cores x mm²) 5 x 4 5 x 4 5 x 4

WASHING CAPACITY (DISH/HOUR) 1080(max) 1080(max) 1080(max)

WASHING CAPACITY (TRAY/HOUR) 67(max) 67(max) 67(max)

WASHING TANK CAPACITY (LT) 42 42 42

BOILER TANK CAPACITY (LT) 7 7 7

WASHING WATER TEMPERATURE (°C)

55 - 60 55 - 60 55 - 60

RINSING WATER TEMPERATURE (°C)

80 – 85 80 – 85 80 – 85

WATER INLET PRESSURE (Bar) 2 – 6 2 – 6 2 – 6

WATER INLET TEMPERATURE (°C)

50 50 50

WASHING PUMP POWER (KW) 0,66 0,66 0,66

RINSING PUMP POWER (KW) 0,37 0,37 0,37

HEATING POWER (WASHING TANK) (KW) 3 3 3

HEATING POWER(BOILER TANK) (KW) 9 9 9

MAXIMUM NOISE (dBA) 85 85 85

GROSS WEIGHT (KG)

115 (±5) 115 (±5) 115 (±5)

DIMENSIONS (Width-Length-Height) (mm) 670 x 785 x 1440 670 x 785 x 1440 670 x 785 x 1440

BASKET DIMENSIONS (mm) 500 x 500 x 105 500 x 500 x 105 500 x 500 x 105

CLASS 1 1 1

PROTECTION CLASS IP X5 IP X5 IP X5

PROGRAM 5 5 5

DETERGENT PUMP NO YES YES

POLISH PUMP NO YES YES

DRAIN PUMP NO NO YES

WARNING SIGNS

POWER NETWORK GROUNDING

PE

GROUNDING

OVERHEAT

POWER SUPPLY CONNECTIONS

400 V 3NPE / 50 Hz

VOLTAGE : 400 V

NETWORK CONNECTION: TRIPHASE

GROUNDED

FREQUENCY : 50 Hz

POWER

5/19

SAFETY DETAILS

The machine should never be exposed to direct sunlight.

This machine must be installed according to effective

regulations. It should only and only be operated in places that
are ventilated well or under a chimney hood. Otherwise, hot water
steam and excess moisture produced by your machine or other
devices within the kitchen may damage the mechanical and
electrical parts of your machine. Ambient humidity should not
exceed 65%.

The machine should never be left in water and its outer

surface should never be cleaned with high pressure water.

This machine is designed for industrial use and should only be

operated by personnel trained according to this manual.

The machine should not be handled by unauthorized personnel
except for the manufacturer or authorized service.

6/19

Ambient temperature where the machine is operated

should be between (+5 °C / +40 °C).

+5 °C / +40 °C

If the machine is fed with hot supply water,
water inlet temperature should not exceed
maximum + 45 °C.