Ozito PXCPRSK-218U Instructions Manual
WHAT’S IN THE BOX
Warning
Danger! - Read the operating
instructions to reduce the risk
of inquiry
Diameter
mA Milliamperes
Double insulated
/min Revolutions or reciprocation
per minute
Ah Amp hour
Nm Newton Meters
no No load speed
V Volts Hz Hertz
ac/~ Alternating current W Watts
Direct current
dc/
Caution! Wear ear-mus.
The impact of noise can cause
damage to hearing.
Caution! Wear safety goggles.
Sparks generated during working or splinters, chips and dust emitted by the
device can cause loss of sight.
Ø
Caution! Wear a breathing mask. Dust which is injurious to health can be
generated when working on wood and other materials. Never use the device
to work on any materials containing asbestos!
Store the battery only in dry rooms with an ambient temperature
of +10¼c to +40¼c. Place only charged batteriers in storage (charged
at least 40%)
.
Cordless Pruning Saw
CORDLESS
PRUNING SAW KIT
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Input: 18V DC
Stroke Length: 20mm
Stroke Speed: 1500-2800/min
Max. Cutting Diameter: 70mm (with clamping jaw)
90mm (w/o clamping jaw)
Max Saw Blade Width: 1.6mm
Weight: 1.2kg
ozito-diy.co.uk
1 x Saw Blade
1 x 2.0Ah Battery
1 x Eco Charger
PRS-012
PXCPRSK-218U
WARRANTY
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our service
department at the address shown on this guarantee card. You can also contact us by
telephone using the customer service number shown. Please note the following terms under
which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by
commercial, trade or industrial business or has been exposed to similar stresses during the
guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to
incorrect installation, a failure to follow the operating instructions (for example connecting
it to an incorrect mains voltage or current type) or a failure to follow the maintenance and
safety instructions or by exposing the device to abnormal environmental conditions or by
lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage caused
by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by
normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are
covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts tted will not result
in an extension of the guarantee period, and no new guarantee will become active for the
work performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and
missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
1017
KNOW YOUR PRODUCT
3.
CORDLESS PRUNING SAW
1. Blade Holder
2. Locking Sleeve
3. Blade
4. Clamping Jaw
5. Clamp Lever
1
2
6. Protective Cover
7. Safety Switch
8. Variable Speed Trigger
9. Main Handle
10. Battery Seating
1. BEFORE USE
Items Supplied
Please check that the article is complete as specied in the scope of delivery.
If parts are missing, please contact our service centre or the sales outlet
where you made your purchase at the latest within 5 working days after
purchasing the product and upon presentation of a valid bill of purchase.
Also, refer to the warranty table in the service information at the end of the
operating instructions.
¥ Open the packaging and take out the equipment with care.
¥ Remove the packaging material and any packaging and/or transportation braces (if
available).
¥ Check to see if all items are supplied.
¥ Inspect the equipment and accessories for transport damage.
¥ If possible, please keep the packaging until the end of the guarantee period.
DANGER! THE EQUIPMENT AND PACKAGING
MATERIAL ARE NOT TOYS. DO NOT LET CHILDREN
PLAY WITH PLASTIC BAGS, FOILS OR SMALL
PARTS. THERE IS A DANGER OF SWALLOWING OR
SUFFOCATION!
Proper Use
The pruning saw is designed for sawing wood, iron, non-ferrous metals and
plastics using the appropriate saw blades.
3 4 9 105 6 7 8
ACCESSORIES
11. Battery Release Tab
12. Battery Charge LED’s
13. Battery Charge Indicator Button
11 12 13 14
14. Charger LED
15. Charger
15
The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
ONLINE
MANUAL
Scan this QR Code with your mobile
device to take you to the online
manual.
SETUP & PREPARATION
3.
2. CUTTING BLADE
WARNING! ENSURE THE BATTERY IS DISCONNECTED
FROM THE TOOL BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
CAUTION! DO NOT HANDLE BLADES WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER
USE, POTENTIALLY CAUSING PERSONAL INJURY.
Fitting a Cutting Blade
The pruning saw can be tted with standard reciprocating saw blades, therefore can be
used to cut various timbers and plastics.
1. Press both sides of the
protective cover and open
it.
2. Rotate and hold the blade
holder as shown.
3. BATTERY AND CHARGING
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
Charging your lithium ion battery - Eco Charger
The tools battery has been shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
2. The charger LED will ash green
showing power is being supplied
to the charger.
3. With the battery sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the battery
ensuring a rm connection.
4. The charger LED will illuminate red signifying that the battery is charging.
3. Insert the cutting blade into the blade holder then release the blade holder
4. Ensure the blade is
secure by pulling on the
blade.
5. Close the protective cover
Removing the Cutting Blade
1. Open the protective cover.
2. Rotate and hold the blade
holder as shown.
3. Remove the cutting blade from
the blade holder.
5. When removing the charger from
the battery, rst press the battery
release tab, then slide the charger
from its position.
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires immediate charging
4. Close the protective cover
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
Loading...