Ozito PXCPRS-018 Instruction Manual

PRS-012
WARRANTY
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
1016
SPECIFICATIONS
Input: 18V Stroke Length: 20mm No Load Speed: 1500-2700spm Max. Cutting Diameter: 60mm (with clamping jaw) 80mm (w/o clamping jaw) Weight: 1.2kg
WHAT’S IN THE BOX
Cordless Pruning Saw
Battery & Charger sold separately
CORDLESS PRUNING SAW
INSTRUCTION MANUAL
ozito.com.au
PXCPRS-018
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486 New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benets provided under this warranty are in addition to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specied on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month warranty Warranty excludes consumable parts, for example: guide bar, chain
and included accessories.
1 x Saw Blade
ONLINE MANUAL
Scan this QR Code with your mobile device to take you to the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGER (SOLD SEPARATELY)
1. Blade Holder
2. Locking Sleeve
3. Blade
4. Clamping Jaw
5. Clamp Lever
6. Protective Cover
7. Safety Switch
8. Variable Speed Trigger
9. Main Handle
10. Battery Seating
CORDLESS PRUNING SAW
1
2
3 4 9 105 6 7 8
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito Power X Change Range.
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30mA OR LESS).
The purchased battery will be shipped in a low charge condition, and requires charging prior to use. Allow several cycles of charging and discharging (through use of the tool) for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate red signifying that the battery is charging.
3. With the charger sitting on a at
surface, align the raised ribs on the battery with the recess in the charger and slide onto the charger ensuring a rm connection.
2. The charger LED will ash green showing power is being supplied to the charger.
5. The charger LED will illuminate green once the battery is fully charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack! Remove battery pack from charger.
3.
Loading...
+ 4 hidden pages