Ozito PXCJBLS-018U Original Instructions Manual
BRUSHLESS
JET BLOWER
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 18V x 2
No Load Speed: 11,000 - 21,000/min
Max. Air Speed: 150km/h
Max. Air Volume: 810m/h
Protection Class: III
Weight: 2.5kg
PXCJBLS-018U
WHAT’S IN THE BOX
Brushless Jet Blower
Blower Nozzle
WARRANTY
ozito-diy.co.uk
1017
Shoulder Strap
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our service
department at the address shown on this guarantee card. You can also contact us by
telephone using the customer service number shown. Please note the following terms under
which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by
commercial, trade or industrial business or has been exposed to similar stresses during the
guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to
incorrect installation, a failure to follow the operating instructions (for example connecting
it to an incorrect mains voltage or current type) or a failure to follow the maintenance and
safety instructions or by exposing the device to abnormal environmental conditions or by
lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage caused
by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by
normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are
covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts tted will not result
in an extension of the guarantee period, and no new guarantee will become active for the
work performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and
missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
Read the directions for use before operating the tool.
Store the battery only in dry rooms with an ambient temperature
of +10¼c to +40¼c. Place only charged batteriers in storage (charged
at least 40%).
Keep all other persons away from the danger zone.
Wear goggles and ear muffs.
Safety class III / Safety extra-low voltage.
Safety class II
Do not use the tool in rain
or snow. Do not expose the
tool to wet conditions.
For use in dry rooms only.
Battery & Charger
sold separately
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. BEFORE USE
BRUSHLESS JET BLOWER
1 2 3
4
1. Blow Nozzle
2. Variable Speed Dial
3. Turbo Boost Button
4. ON/OFF Trigger
5. Handle
6. Battery Seating
ACCESSORIES
7. Shoulder Strap
5 6
7
Proper Use
The cordless jet blower is designed to handle only foliage and garden refuse
such as grass and small branches. Any other use is prohibited.
The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
Items Supplied
Please check that the article is complete as specied in the scope of delivery.
If parts are missing, please contact our service centre or the sales outlet
where you made your purchase at the latest within 5 working days after
purchasing the product and upon presentation of a valid bill of purchase.
Also, refer to the warranty table in the service information at the end of the
operating instructions.
¥ Open the packaging and take out the equipment with care.
¥ Remove the packaging material and any packaging and/or transportation braces (if
available).
¥ Check to see if all items are supplied.
¥ Inspect the equipment and accessories for transport damage.
¥ If possible, please keep the packaging until the end of the guarantee period.
DANGER! THE EQUIPMENT AND PACKAGING
MATERIAL ARE NOT TOYS. DO NOT LET CHILDREN
PLAY WITH PLASTIC BAGS, FOILS OR SMALL
PARTS. THERE IS A DANGER OF SWALLOWING OR
SUFFOCATION!
CAUTION!
Residual Risks
Even if you use this electric power tool in accordance with instructions,
certain residual risks cannot be rules out. The following hazards may arise in
connection with the equipment’s construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used
over a prolonged period or is not properly guided and maintained.
3. BATTERY & CHARGING (SOLD SEPARATELY)
2. ASSEMBLY
SETUP & PREPARATION
1. Slide the nozzle over the
blower outlet, aligning the
blower nozzle slot with the
tab on the outlet of the jet
blower.
2. Rotate the blower nozzle to lock
in place.
Fitting the Jet Blower Nozzle
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERIES DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
Fitting the Shoulder Strap
1. Ensure the shoulder strap is
clipped onto the top of the jet
blower.
2. To unclip the jet blower, press
either side of the buckle.
Note: To use the shoulder strap simply slide the strap over your shoulder so
that some of the weight of the jet blower can be taken by your shoulder.
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. The charger LED will illuminate
green once the battery is charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is 85% - 100% charged and ready for use.
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
Loading...