Ozito PXCG-USBU Original Instructions Manual
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online
manual.
1
2
3
4
Important! The charging unit is only allowed to be used with the lithium-ion batteries
from the Power X Change range.
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
YOUR BATTERY CHARGER.
1. The charging unit is not allowed to be used for non-rechargeable, normal batteries.
2. Sufcient ventilation is required.
3. The current and voltage information on the battery pack must be the same as that on the charging
unit.
4. Do not expose the charging unit to splashwater or rain.
5. Do not throw old or damaged batteries into water or re. Follow the environmental protection
directives.
6. Place the charging unit away from all sources of heat.
7. Do not take the charging unit apart. Take it to an authorized repair center if servicing or repairs are
needed. Incorrect assembly can result in an electric shock and even death or re.
8. Children must always be supervised in order to ensure that they do not play with the equipment.
9. Use only USB cables which are in perfect condition.
USB CHARGER SAFETY WARNINGS
DISPOSAL AND RECYCLING
ELECTRICAL SAFETY
WARNING! When using tools, basic safety precautions including
the following should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,
before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
1 Charging Light
2 On/Off Button
3 Output 1.0A
4 Output 2.1A
DESCRIPTION OF SYMBOLS
The USB power station is designed for charging and operating mobile phones, tablet
computers, cameras and MP3 players that can be charged and operated via USB cables.
There are 2 USB ports that can be used to charge and operate 2 devices simultaneously.
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials
in this packaging can be reused or recycled. The equipment and its accessories are made of various
types of material, such as metal and plastic. Never place defective equipment in your household refuse.
The equipment should be taken to a suitable collection center for proper disposal. If you do not know
the whereabouts of such a collection point, you should ask in your local council ofces.
For EU countries only Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its
implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot. Recycling alternative
to the return request: As an alternative to returning the equipment to the manufacturer, the owner of
the electrical equipment must make sure that the equipment is properly disposed of if he no longer
wants to keep the equipment. The old equipment can be returned to a suitable collection point that will
dispose of the equipment in accordance with the national recycling and waste disposal regulations.
This does not apply to any accessories or aids without electrical components supplied with the old
equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Suggested Charging Capacity by Battery Power
Output Suitable power to charge
1.0Amp (Port 1) Mobile phone, camera, MP3 players, small devices.
2.1Amp (Port 2) Tablet computer, mobile phone, camera, MP3 players,
devices requiring more power.
CHARGING CAPACITY
SPECIFICATIONS
Input: 18V DC
Output: 5V DC 2.1A,
5V DC 1.0A
Compatible Batteries: PXBP-150U (18V 1.5Ah)
PXBP-200U (18V 2.0Ah)
PXBP-300U (18V 3.0Ah)
PXBP-400U (18V 4.0Ah)
PXBP-520U (18V 5.2Ah)
ozito-diy.co.uk
USB POWER
STATION
ORIGINAL INSTRUCTIONS
PXCG-USBU
Warning
Volts Hertz
Amps
A
Amp Hour
Ah
HzV
WARNING - Read the operating
instructions to reduce the risk of injury
Never place any electric power tools
in your house-hold refuse
For use in dry rooms only
1. CHARGING A DEVICE 2. MAINTENANCE
• Disconnect the charger from power source before cleaning.
• Keep the charger in a dry place out of reach of children.
• If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, soft
cloth only to wipe down the surface. Never let any liquid get inside the charger.
• There are no parts inside the charger which require maintenance. Do not take the
charger apart. If the charger is damaged, contact your supplier or the manufacturer.
Connecting USB Power Station to battery pack
Connecting USB device to USB Power Station
1 Connect the device to be charged via
USB cord to the USB Power Station
outlet.
4 To remove, push the on/off
switch into the off position, then
press the battery release tab and
slide the USB Power Station from
its position.
Note: For best results ensure the battery is fully charged.
Note: If no device is connected, the USB Power Station will turn off. The red
LED light will no longer be illuminated.
3 The LED will illuminate red
showing power is being supplied
to the USB Power Station.
2 Push the On/Off button to turn on
1 With the battery sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the battery
ensuring a rm connection.
PXCG-USBU
WARRANTY
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our
service department at the address shown on this guarantee card. You can also contact
us by telephone using the customer service number shown. Please note the following
terms under which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to
you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or
professional applications. A guarantee contract will not be created if the device has
been used by commercial, trade or industrial business or has been exposed to similar
stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due
to incorrect installation, a failure to follow the operating instructions (for example
connecting it to an incorrect mains voltage or current type) or a failure to follow
the maintenance and safety instructions or by exposing the device to abnormal
environmental conditions or by lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage
caused by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear
or by normal use of the device.
4. Your Product is guaranteed for a period of 12 months from the original date
of purchase and is intended for DIY (Do It Yourself) use only. Warranty excludes
consumable parts. Guarantee claims should be submitted before the end of the
guarantee period within two weeks of the defect being noticed. No guarantee claims
will be accepted after the end of the guarantee period. The original guarantee period
remains applicable to the device even if repairs are carried out or parts are replaced.
In such cases, the work performed or parts tted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work performed or
parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT
TO THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables
and missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE
HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
OZITO UK Unit 9 Stadium Court, Wirral International Business Park,
Plantation Road, Bromborough, Wirral, CH62 3QG
Loading...