Ozito PXCG-USB Instruction Manual
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online
manual.
1
2
3
4
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
YOUR BATTERY CHARGER.
1. Before using the charger read all instructions and cautionary markings on the charger, battery
pack and the product using the battery pack.
2. Do not place any object on top of the charger or place the charger on a soft surface that may
result in excessive internal heat. Place the charger in a position away from any heat source.
3. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged
in any way.
4. Do not disassemble charger.
5. Never attempt to connect 2 chargers together.
6. DO NOT store or use the tool and battery pack in locations where the temperature ma y reach or exce ed
40ºC (such as inside sheds or metal buildings in summer).
7.
8. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The
battery can explode in a re.
9. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks
or cracks, immediately discontinue use and do not recharge.
10. Only use USB charging cables in good working condition
11. Never attempt to modify the charger in any way
12. Refer to the charging instructions and rating of your electronic appliance before using with this
device.
USB CHARGER SAFETY WARNINGS
ELECTRICAL SAFETY
WARNING! When using tools, basic safety precautions including
the following should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,
before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
1 Charging Light
2 On/Off Button
3 Output 1.0A
4 Output 2.1A
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of with
household waste but in an environmentally friendly way. Please recycle
where facilities exist. Check with your local council authority for recycling
advice.
Recycling packaging reduces the need for landll and raw materials. Reuse
of recycled material decreases pollution in the environment. Please recycle
packaging where facilities exist. Check with your local council authority for
recycling advice.
DESCRIPTION OF SYMBOLS
Warning
Volts Hertz
Amps
A
Amp Hour
Ah
HzV
Read the manual
Do not dispose of in rubbish
Indoor use only
Note: PXCG-USB is suitable to charge USB compatible devices such as a
mobile phone, tablet, camera or MP3 player via the USB ports. Two devices can
be charged simultaneously.
Note: The above charging capacity is based on the following devices -
iPhone 6 (2014) and iPad 4th Gen (2012).
Charging capacity will vary based on your device.
Suggested Charging Capacity by Battery Power
Output Suitable power to charge
1.0Amp Mobile phone, camera, MP3 players, small devices.
2.1Amp Tablet computer, mobile phone, camera, MP3 players,
devices requiring more power.
Battery Type Charging Capacity
PXBP-150 1.5Ah 18V
Lithium Ion Battery
2 x Mobile phone
PXBP-300 3.0Ah 18V
Lithium Ion Battery
4 x Mobile phone
or 1 x Tablet computer
PXBP-520 5.2Ah 18V
Lithium Ion Battery
6 x Mobile phone
or 1 x Tablet computer
or 2 x Mobile phone and 1 x Tablet computer
CHARGING CAPACITY
SPECIFICATIONS
Input: 18V DC
Output: 5V DC 2.1A,
5V DC 1.0A
Compatible Batteries: PXBP-150 (18V 1.5Ah)
PXBP-200 (18V 2.0Ah)
PXBP-300 (18V 3.0Ah)
PXBP-400 (18V 4.0Ah)
PXBP-520 (18V 5.2Ah)
ozito.com.au
USB POWER
STATION
INSTRUCTION MANUAL
PXCG-USB
1. CHARGING A DEVICE 2. MAINTENANCE
• Disconnect the charger from power source before cleaning.
• Keep the charger in a dry place out of reach of children.
• If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, soft
cloth only to wipe down the surface. Never let any liquid get inside the charger.
• There are no parts inside the charger which require maintenance. Do not take the
charger apart. If the charger is damaged, contact your supplier or the manufacturer.
Connecting USB Power Station to battery pack
Connecting USB device to USB Power Station
1 Connect the device to be charged via
USB cord to the USB Power Station
outlet.
4 To remove, push the on/off
switch into the off position, then
press the battery release tab and
slide the USB Power Station from
its position.
Note: For best results ensure the battery is fully charged.
Note: If no device is connected, the USB Power Station will turn off. The red
LED light will no longer be illuminated.
3 The LED will illuminate red
showing power is being supplied
to the USB Power Station.
2 Push the On/Off button to turn on
1 With the battery sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the battery
ensuring a rm connection.
OZITO Australia/New Zealand (Head Ofce)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are
entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under
this warranty, however, where you have suffered any additional direct loss as
a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
36 MONTH REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date
of purchase and is intended for DIY (Do It Yourself) use only. If a product is
defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
PXCG-USB
Loading...