Ozito PXCBLK-018 User Manual
CORDLESS
BLOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
No Load Speed: 12,000/min
Max. Air Speed: 210km/hr
Weight: 1.35kg
ozito.com.au
STANDARD EQUIPMENT
Cordless Blower
Blower Tube
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
PXCBLK-018
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: blower tube.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
0318
KNOW YOUR PRODUCT
SETUP & PREPARATION
CORDLESS BLOWER
1 Blow Tube
2 Blow Tube Release Tab
1 2 3
3 ON/OFF Switch
4 Handle
4
1. ASSEMBLY
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Fitting the Blower Tube
1. Align the blower tube with the
outlet of the blower.
2. Push the blower tube
onto the blower until it
clicks into place.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
3. To remove the blower tube, press
the blower tube release tab
while pulling the tube away from
the housing.
OPERATION
2. INSERTING & REMOVING THE BATTERY
Inserting the Battery Pack
1. Align the ribs of the battery with
the recess in below the handle.
2. Slide the battery in so
that it clicks into place.
Removing a Battery from the Blower
3. CONTROLS
WARNING!: DO NOT USE THE BLOWER WITH ANY
TYPE OF ACCESSORY OR ATTACHMENT. SUCH
USAGE MIGHT BE HAZARDOUS.
Switching On and Off
1. To start the blower
squeeze the on/off
switch.
2. To stop the blower
release the on/off
switch.
WARNING!: DO NOT PUT PART OF YOUR BODY
SUCH AS HANDS AND FINGERS IN THE VACUUM
OPENING OR EXHAUST OPENING.
1. Press and hold the battery
release tab to release the
battery.
2. Slide the battery out.
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
Loading...