Ozito PXBP-40B User Manual
0%
4.0Ah BATTERY
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Battery Capacity: 4.0Ah Li-ion
Power Consumption: 72Wh
Weight: 0.65kg
ozito.com.au
BATTERY SAFETY WARNINGS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
YOUR BATTERY.
1. Before charging the Power X Change battery, read all instructions and cautionary markings on the
charger, battery pack and the product using the battery pack.
2. DO NOT store or use the tool and battery pack in locations where the temperature may reach or
exceed 50°C (such as inside sheds or metal buildings in summer).
3. The battery pack is not fully charged out of the carton. First read the safety instructions and then
follow the charging notes and procedures.
4. The longest life and best performance can be obtained if the battery pack is charged when the air
temperature is between 18-24°C. Do not charge the battery pack in air temperatures below 0°C
or above 50°C. This is important and will prevent damage to the battery pack.
5. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The
battery can explode in a re.
6. Never attempt to open or dismantle the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks immediately discontinue use and do not recharge.
7. During charging, the battery must be placed in a well-ventilated area.
8. Keep battery pack out of reach of children.
9. Do not expose battery pack to heat or re. Avoid storage in direct sunlight.
10. Do not short-circuit the battery pack. Do not store battery pack haphazardly in a box or drawer
where they may short circuit each other or be short-circuited by other metal objects.
11. Do not subject the battery pack to mechanical shock (sudden impacts).
12. In the event of a cell leaking, do not allow the liquid to contact the skin or eyes. If contact has
been made, wash the affected area with copious amounts of water and seek medical advice.
13. Do not use any charger other than that specically provided for use with the battery pack.
14. Do not use battery pack with equipment it is not designed for.
15. Always keep battery pack clean and dry.
16. Do not use or charge the battery in wet weather conditions. Do not submerge the battery in
water.
17. Wipe the battery terminals with a clean dry cloth if they become dirty.
18. Do not leave a battery on prolonged charge when not in use.
19. After an extended period of storage it may be necessary to charge and discharge the battery pack
several times to obtain maximum performance.
20. Retain the manuals for future reference.
21. When possible, remove the battery pack from the equipment when not in use.
22. Do not store battery near ammable substances.
1. Battery
2. Battery Release Button
3. Charge Indicator Button
2
31
PXBP-40B
DESCRIPTION OF SYMBOLS
Volts Hertz
Alternating Current
ac/~
dc
Direct Current
Milliamperes
mA
Lithium Ion Battery
Recycle Battery
Do not incinerate
Regulatory Compliance
Mark (RCM)
Read Instruction Manual
HzV
Watts
W
Amp Hour
Ah
Warning
Do not store or use battery in
temperatures exceeding 50°C
Do not put in the rubbish
Do not get battery wet
Do not store battery when the charge
40-60%
is low; store between 40-60%.
Do not expose to rain.
CARING FOR THE ENVIRONMENT
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of re, electric
shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an
emergency, before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and
New Zealand.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid hazard.
Note: Double insulation does not take the place of normal safety precautions when
operating this tool. The insulation system is for added protection against injury resulting
from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an
extension lead not suitable for the power input of the tool or which is damaged or defective
may result in a risk of re and electric shock.
To reduce the risk of electric shock, we recommend the use of a residual current device
(rated 30mA or less).
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Power tools that are no longer usable should not be disposed of with
household waste but in an environmentally friendly way. Please recycle
where facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landll and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your local
council authority for recycling advice.
1. OPERATION
WARRANTY
Only use the battery pack with Ozito Power X Change 18V cordless products.
CHARGING YOUR LITHIUM ION BATTERY
This battery has been shipped in a low charge condition, and requires charging prior to
use. Allow several cycles of charging and discharging (through use with a compatible
tool) for the battery to reach its optimum performance / runtime.
This battery is compatible with chargers from the 18V Ozito Power X Change range
available through your local Bunnings Warehouse. Product availability may differ.
1. Insert the power plug of the charger into the mains socket outlet. The green LED
will begin to ash when properly connected to power supply.
2. Insert the battery pack into the battery charger .
3. Remove battery from the charger once fully charged. Disconnect the charger from
the power supply.
Note: The battery pack can become a little warm during the charging. This is normal.
If the battery pack fails to charge, check:
if there is voltage at the socket outlet
that the battery and charger are properly connected.
If the battery pack still fails to charge, please contact our customer service center.
BATTERY CHARGE INDICATOR
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires immediate charging
Low state of charge, requires charging soon.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are
entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under
this warranty, however, where you have suffered any additional direct loss as
a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
36 MONTH REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date
of purchase and is intended for DIY (Do It Yourself) use only. If a product is
defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
BATTERY PROTECTION SYSTEM
The tool is equipped with a battery protection system, which helps to ensure longevity
of the battery.
The output power automatically cuts off during operation when the tool and/or battery
are placed under the following situations:
• When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of overload, then pull
the switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during use or
immediately after using the tool.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
0719
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
OZITO Australia/New Zealand (Head Ofce)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
PXBP-40B
Loading...