Ozito PPW-801 Instruction Manual

0

1

2

3

4

5

6

Bar

POTABLE
PRESSURE
PUMP

800W

INSTRUCTION MANUAL
SPECIFICATIONS

Motor: 800W
Max. Flow Rate: 3,200 l/h
Max. Lift: 8m
Max. Head: 38m
Inlet & Outlet: 25.4mm (1”BSP) Female
Max. Delivery Pressure: 3.8 bar
Water Temp.: 1C to 35ºC
IP Rating: IPX4
Weight: 8.4kg

PPW-801

WHAT’S IN THE BOX

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: O-rings, bearing,
seals gaskets.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
thanthatspeciedonthetool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

OZITO Australia/NewZealand(HeadOfce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

Thebenetsprovidedunderthiswarrantyareinaddition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

ozito.com.au

0716

0

1

2

3

4

5

6

Bar

Potable Pressure Pump

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

0

1

2

3

4

5

6

Bar

This constant pressure pump is designed for pumping clean water in
the house and garden. It is ideal for providing domestic water supply to
laundries, toilets and outdoor taps, combined with a trigger nozzle and
hose for garden watering and washing cars. Tested to AS/NZS 4020
as suitable for use in contact with drinking water.

Your pump requires no assembly before use other than the connection
of suitable inlet/outlet hose or pipe adaptors (not included).

Positioning the pump

The device must be placed on a
horizontal, level surface that is

sufciently capable of supporting

the total weight of the device

when lled with water.

Four mounting recesses

allow for xing the base to the

mounting surface (bolts not
supplied).

Note: The installation site must be well ventilated and protected from

the effects of weather.

Note: When operating indoors you must ensure that there is a drain in

the oor or a mechanism to prevent leakage.

1. Suction inlet

2. Pressure gauge

3. Priming plug

4. Discharge outlet

5. Carry handle

6. On button

7. Indicator lights

8. Water drain plug

9. Mounting recesses

10. Base

POTABLE PRESSURE PUMP

KNOW YOUR PRODUCT

1. SETTING UP

SETUP & PREPARATION

WARNING!: ENSURE THE PUMP IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS.

1

8 9 10

4 5 6 732

Connecting to
the discharge outlet

1. Teon tape (not included) is required on

threads to ensure a water tight seal and

prevent any leakage. Wind Teon clockwise
on ttings

2. Remove the plastic protection cover
from the discharge outlet.

3. Insert a 1” male threaded hose
adaptor (not included).

4. Securely attach the output hose
or pipe (not included) to the
other end of the adaptor. Ensure
you have the correct diameter
hose or pipe that is compatible
with your water discharge
application.

Note: The discharge hose or pipe you are using must have a minimum

diameter of 19mm (3/4’’).

Note: Ensure the discharge hose or pipe is not restricted in any

way and nothing is obstructing the hose or pipe when the pump is in
operation.

Connecting to the suction inlet

1. Teon tape (not included) is required

on threads to ensure a water tight seal

and prevent any leakage. Wind Teon
clockwise on ttings.

2. Remove the plastic protection cover
from the suction inlet.

3. Insert a 1”

male threaded
hose adaptor
(not included).

Tighten rmly

with a spanner
(not included).

4. Securely attach
the input hose
(not included)
or pipe to the
other end of the
adaptor. Ensure
you have the
correct diameter
hose or pipe that
is compatible
with your water
drawing source.

Note: The suction pipe should have an internal diameter of at least

25.4mm (1”); it must be kink resistant and suitable for pump use.

Ensure the input hose or pipe is not restricted in any way.

2. SUCTION INLET 3. DISCHARGE OUTLET

0

1

2

3

4

5

6

Bar

0

1

2

3

4

5

6

Bar

0

1

2

3

4

5

6

Bar

0

1

2

3

4

5

6

Bar

WARNING!: RISK OF INJURY! IF THE COMPONENTS

ARE NOT COMPRESSION-PROOF OR IF THEY ARE
IMPROPERLY INSTALLED, THE PRESSURE LINE COULD
BURST DURING OPERATION.