Ozito Power Garden SSH-240 Operation Manual
0909
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 1
Black
Cyan
Magenta
Yellow
Code: SSH-240
Date: 11/09/09 Edition: 06 Op: Even
1. On/off switch
2. Reset button/overload protector
3. Direction control switch
4. Cutting adjustment bolt
5. Feeding hopper
6. Discharge chute
7. Transport handle
8. Stand
9. Wheels
SPECIFICATIONS - MODEL NO. SSH-240
2
1
9
3
2
6
Motor:
Input:
No load speed:
Max cutting diameter:
Blades:
Protection class:
Tool weight:
2400W (S1 2000W / S6 (40%) 2400W)
Duty type S1: continuous running duty
S6: continuous-operation / periodic duty
(4 min. Full load, 6 min. No load)
230-240V ~ 50Hz
40/min
40mm
Roller cutting system
I (earthed appliance)
25kg
Assembly components
10. Shredder housing
11. Support legs (x2)
12. Wheel axle
13. Wheels (x2)
14. Wheel caps (x2)
15. Wheel locking insert (x2)
16. Nut & washers (to attach legs) (x4)
17. 55mm screws, nut & washers (to attach axle) (x2)
18. Hex wrench
19. Hex key
20. Collection bag
5
8
10
11
13
14
20
7
4
17
19
18
16
15
12
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 2
3
TABLE OF CONTENTS
SPECIFICATIONS ………………………………………..
INTRODUCTION………………………………………...
GENERAL SAFETY RULES………………………………
ASSEMBLY ……………………………………………….
OPERATION ……………………………………………..
MAINTENANCE …………….…………………………..
TROUBLE SHOOTING……….…………………………
WARRANTY………………………………………………
Page 2
Page 4
Page 5
Page 8
Page 9
Page 12
Page 13
Page 16
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 3
INTRODUCTION
4
Warning! When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that
the power supply corresponds to the voltage on the rating plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
Using an extension lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective. When using an extension lead
on a reel, always unwind the lead completely. Use of an extension lead not
suitable for the power input of the tool or which is damaged or defective may
result in a risk of fire and electric shock.
Congratulations on purchasing an Ozito Silent Shredder. We aim to
provide quality tools at an affordable price. We hope you will enjoy
using this shredder for many years.
The SSH-240 Silent Shredder has been designed for shredding
garden material including dry plant residue, twigs, sticks and
branches up to 40mm thick.
The shredder quietly breaks your waste into small pieces which helps
accelerate the composting process. The shredded material can be
recycled, used for composting purposes or spread over garden beds
to provide nutritional value to your plants.
This product is intended for DIY use only.
ELECTRICAL SAFETY
GENERAL SAFETY INSTRUCTIONS
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 4
!
!
5
GENERAL SAFETY RULES
W
arning! Read all instructions.
Failur
e to follow all instructions listed below
may result in electric shock, fire and/or serious injury. The term "power tool"
in all of the warnings listed below refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
Save these instructions
1) Work area
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in the off-position before
plugging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
SSH-240 Manual.qxd 9/11/09 9:34 AM Page 5
Loading...