Ozito PLR-5000U Original Instructions Manual

WARRANTY

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

0616

All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.

CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

PLANER

750W

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Voltage: 230-240V ~ 50Hz
Input Power: 750W
No Load Speed: 14,000/min
Planing Width: 82mm
Blade Type: HSS Blades
Planing Depth: 3mm
Rebate Depth: 0-20mm
Weight: 3.2kg

PLR-5000U

WHAT’S IN THE BOX

Planer

Spanner & Hex Key

Dust Extraction
Adaptor

Parallel Guide

ozito-diy.co.uk

Rebate Guide

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

1 Depth Adjustment Knob

2 Guide Bracket Knob

3 Dust Extraction Chute

4 Planing Blade

5 Lock Off Button

6 On/Off Trigger

7 Rear Shoe

8 Base Park Shoe

PLANER

KNOW YOUR PRODUCT

1. ASSEMBLY

9 Parallel Guide

10 Dust Adaptor

11 Rebate Guide

12 Blade Spanner

13 Hex Key (2.5mm)

ACCESSORIES

SETUP & PREPARATION

WARNING! ENSURE THE TOOL IS TURNED OFF AND

DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.

The park shoe allows you to
rest the planer on the workpiece
without the blades causing dents
or damage.

The park shoe will rotate out of
the way while planing.

1 Loosen the rebate guide

knob by rotating it anti­clockwise.

The rebate guide allows a specic rebate depth to be achieved.

131211109

1 2 3 4 5 6 7 8

Base Park Shoe

Rebate Guide

2 Adjust the rebate guide to

the desired depth and secure
in place.

1 Fasten the guide mounting

bracket to the parallel guide
using the screw, washer and
depth knob.

Parallel Guide

2 Align the mounting bracket

with the ribs and hole on tool
housing.

3 Secure the bracket and

guide in place by tightening
the guide bracket knob.

2. DUST EXTRACTION 3. CONTROLS

1 Increase cutting depth.

1 Press and hold the lock off

switch.

2 Press the on/off switch to

start the planer.

3 Release on/off switch to

turn off.

2

1

3

2 Decrease cutting depth.

OPERATION

4 Wait until the blade stops completely before sitting the planer

down.

The planing depth can be adjusted between 0 and 3mm. The
numbers on the depth adjustment correspond to the planing depth

(mm). Always test the setting on a scrap workpiece rst.

CAUTION! THE DUST EXTRACTION CHUTE MUST

ALWAYS BE IN THE LOCKED POSITION WHIST
OPERATING AS THIS WILL ALLOW DUST TO BE
REMOVED FROM THE PLANER AND WORKPIECE.

WARNING! THE POWER SUPPLY FOR THIS PRODUCT

SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS). A RESIDUAL
CURRENT DEVICE REDUCES THE RISK OF ELECTRIC
SHOCK.

2

1

3

Depth Adjustment Knob

Lock-off Trigger

1 To remove the dust extraction

chute, rotate the chute
clockwise & then slide out.

Dust Extraction Chute

2 To t the dust extraction

chute, slide the chute into the
opening on your preferred
side.

The dust extraction chute can be installed on either side of the planer,
allowing you to determine on which side dust extraction occurs.

For optimum dust extraction, a extraction vacuum hose can be tted to

the extraction chute by using the dust adaptor. The dust extraction chute

can be tted either side of the housing to allow the hose to be connect

from the desired side.

Dust Adaptor

1 Push the dust adaptor

into the dust extraction
chute.

2 Connect a vacuum hose to the dust adaptor.

3 Lock in place by rotating

anti-clockwise.