Ozito MFR-2200U Original Instructions Manual
WHAT’S IN THE BOX
MULTI
FUNCTION
TOOL
300W
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Motor: 300W
Input: 230-240V ~ 50Hz
No Load Speed: 15,000-21,000 opm
Orbit Angle: 3.2°
Sanding Pad Size: 92 x 92 x 92mm
Weight: 1.43kg
MFR-2200U
ozito-diy.co.uk
Multi Function Tool
Sanding Pad & Paper x 15
Dust Collection
Accessory
Scraper & Triangular
Rasp
Straight Blade x 2
Semi Circular Blade
Grout Removal Disc
WARRANTY
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
0616
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectication of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts, for example: carbon brushes, blades, sanding
paper, etc. Guarantee claims should be submitted before the end of
the guarantee period within two weeks of the defect being noticed. No
guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if
repairs are carried out or parts are replaced. In such cases, the work
performed or parts tted will not result in an extension of the guarantee
period, and no new guarantee will become active for the work performed or
parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. Accessory Drive Spindle
2. Side Handle
3. On/Off Switch
4. Rear Handle
5. Variable Speed Dial
MULTI FUNCTION TOOL
6. Semi Circular Blade
(Wood, Plastic & Metal)
7. Straight Blade x 2
(Wood & Plastic)
8. Scraper
9. Triangular Rasp
10. Grout Removal Disc
11. Sanding Pad
12. Sanding Paper
P60 Grit x 5
P120 Grit x 5
P240 Grit x 5
13. Hex Key
14. Locking Bolt
15. Washer
16. Dust Collection Accessory
ACCESSORIES
1. ASSEMBLY
Accessory Fitment
1. Place accessory
over the drive
spindle and
position to suit
angle needed
for application.
Note: Ensure the accessory is sitting at on spindle and locking
pins.
2. Place at side of
accessory tting
washer on the
accessory then insert
locking bolt.
3. Tighten locking
bolt with hex key.
1. Loosen locking bolt with
hex key.
2. Remove bolt and
accessory.
Accessory Removal
Side Handle
The side handle can be tted on either side of the tool. The
correct position will be determined by your preferred hand and the
operation being performed.
Removing
2. Remove the side handle.
Attaching
1. Firmly attach the side
handle in the desired
position.
1
6 7 8 9 10
11 12 13 14 15 16
2 3 4 5
OPERATION
2. CONTROLS
2. To turn off, slide the
switch backwards.
2. Place the circular end of the dust collection adaptor over the
accessory spindle so that the adaptor rests against the bottom
of the tool handle. Push the securing clip over the power cord
to secure in place.
3. Connect a vacuum or dust extractor hose to the hose
connector.
1. To turn on, slide the
on/ off switch forward.
1. Push the parts of the dust collection accessory together.
The dust collection adaptor can be tted to your multi function
tool to reduce the build up of dust and debris while operating.
Accessories must be removed prior to tting the dust collection
accessory.
On / Off Switch
Fitting the Dust Collection Accessory
Variable Speed
For various applications, you will need to select the appropriate
speed for the task.
1. Turn multi function tool on.
2. Scroll through variable
speed dial to desired speed
setting.
Note: The higher the number on the variable speed dial the
faster the oscillation frequency of the multi function tool.
CAUTION: THE POWER SUPPLY FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
Loading...