Ozito MCS-5000 Instruction Manual

METAL
CUTTING
SHEARS

500W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor: 500W
No load speed: 0 – 1,600 rpm
Max. Thickness: 1.2mm
Tool weight: 2.2kg

MCS-5000

WHAT’S IN THE BOX

Metal Cutting Shears

ozito.com.au

Hex Key

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

1 Shears

2 Shear Collar

3 Belt Clip

4 Trigger Switch

5 Sure Grip

6 Lock On Button

METAL CUTTING SHEARS

KNOW YOUR PRODUCT

1. ON/OFF

1. Squeeze trigger switch
to turn on.

4. Release the trigger switch,
then the lock on button.

3. To lock the tool on,
squeeze the trigger switch
then the lock on button.

2. Release switch to
turn off.

OPERATION

The tool is recommended for use with a residual current device
with a rated residual current of 30mA or less.

A A

5. To unlock the tool, squeeze and release the trigger switch.

A

B

B B

7 Hex Key

2. VARIABLE SPEED 3. PREPARATION

1. Mark your cutting line

2. Start the tool and adjust the speed.

1. Vary the pressure on the trigger switch to change
the speed of cutting to suit the job.

Slower Faster

Note: When using the lock on button, the variable

speed trigger can only be set to maximum speed.