Ozito ACK-0015, ACK-190U Instruction Manual
INFLATE-IT
COMPRESSOR KIT
1100 W
INSTRUCTION MANUAL
SPECIFICATIONS
Power supply: 230 – 240V ~ 50Hz
Motor: 1100W (S3:15%)
No Load Speed: 3,550/min
Max. Pressure: 8bar (116psi)
Max. Flow Rate: 140 l/min
IP Rating: IP20
Product weight: 5.7 kg
ACK-0015
WHAT’S IN THE BOX
ozito.com.au
Air Compressor
Air Gun
Ination Adaptors x 3
Air Nozzle
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
7. Air Gun
8. Air Hose
9. Valve Connector
10. Pressure Gauge
11. Air Gun Trigger
12. Integrated Release Valve
13. Blower Nozzle
14. Ination Adaptors
1. Supporting Foot
2. Housing
3. ON/OFF Switch
4. Transport Handle
5. Quick-release Nitto Coupling
6. Compressed Air Hose
AIR COMPRESSOR
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY AND STARTING
Pre Setup Checks
• Examine the machine for signs of transit damage. If damaged, do not
use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms.
• The compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with sprayed
water. Before you use the machine, make sure that the mains voltage
complies with the specications on the rating plate.
SETUP & PREPARATION
21 3 5 64
7
8
13
9 10
14
11 12
Connecting to the Compressed Air Hose
1. Insert the nipple of the air tool into the
quick-lock coupling of the air hose.
2. The quick-lock sleeve will spring forward
automatically, connecting the accessory.
Disconnecting
1. To disconnect the air tool, pull back the
sleeve on the quick-lock coupling and
remove the tool.
Switching On and Off
Note: It is recommended to use in conjunction with this appliance a
Residual Current Device (RCD) of rating not exceeding 30mA.
1. Attach the desired tool to the quick
release coupling of the air hose.
2. Connect the compressors’ power
cord to the mains power supply.
3. To switch ON the equipment, set the
On/Off switch to position “I” (On).
4. To switch OFF the equipment, move
the On/Off switch to position “0” (Off).
Disconnect the power cord from the
mains.
5. Run the attached air tool until no
compressed air remains in the hose.
2. OPERATION
OPERATION
IMPORTANT!: WHEN RELEASING THE QUICK-RELEASE
COUPLING, BE SURE TO HOLD THE COUPLING PIECE
TO PROTECT YOURSELF AGAINST INJURY FROM THE
REBOUNDING HOSE.
IMPORTANT!: BEFORE CONNECTING OR DISCONNECTING
ACCESSORIES, ALWAYS MAKE SURE THAT THE
COMPRESSOR IS OFF.
WARNING!: COMPRESSED AIR CAN BE A
DANGEROUS FORM OF ENERGY. GREAT CARE IS
REQUIRED WHEN USING THE COMPRESSOR AND ITS
ACCESSORIES.
Loading...