Outdoor Great Room Sonoma and San Juan Fireplace User Manual

Sonoma/San Juan Fireplace

SANJUANFP

Installation Instructions

SONFS42-M-K

1 | P a g e

42425 Rev A-8/18/2011

Congratulations on your purchase of a new

These instructions will help you get your new fireplace set
up in no time. Be sure to thoroughly read your gas burner
instruction manual for important safety information and
special considerations.

outdoor gas fireplace!

Required Tools:

 Razor Knife

 For cutting packaging

 Hammer or Pry Bar

 To remove staples from 1x2”

securing boards

 Power Drill or Philips Screw Driver

 To remove packaging screws

 9/16” Deep Socket or Standard

Socket with Extension

 To attach top shelf

 Leather work gloves

 To protect hands from rough

and sharp edges of inner steel

 IT IS RECOMMENDED THAT A MINIMUM

OF TWO PEOPLE ASSEMBLE AND INSTALL
THIS FIREPLACE

framing

2 | P a g e

Unwrapping your Fireplace

1

Using a razor knife, carefully cut plastic

cutting or scraping the unit inside.

Using a pry bar or hammer, pry up staples

removal from pallet.

With a minimum of two people, carefully

remove cast concrete top and hearth pad

from fireplace and set aside.

2

3

4

Remove mantel from inside of firebox and
set aside before proceeding to the next step.

covering fireplace , taking care to avoid

holding 1x2” boards to ease fireplace

3 | P a g e