Sierra , Rivers Edge, Grandstone & San Juan Table
Installation Instructions
1 | P a g e
Contents
Contents……………………………………………………..2
Required Tools…………………………………………..3
Placing the Table………………………………………4
Gas Connection………………………….…………….5
Igniter Installation…………….………………………...6
Placing the Top…………………………………………..7
Burner Installation……………………………………….8
Locating Propane tank……………………………..9
Door Installation…………………………………………...10
2 | P a g e
Required Tools
Utility Knife
To cut and remove packaging
2 Open Ended Wrenches
To make gas connections
Leather Gloves
To protect hands from rough edges found
on the coffee table.
One (1) AAA Battery (not included)
Required for igniter installation for Crystal
Fire burners.
It is recommended that a
minimum of two people
assemble and install the Sierra
and San Juan Coffee Tables.
3 | P a g e
Placing the Sierra/San Juan table
Shown with door removed
1. Remove access door
2. Remove the base from the box
3. Move the base without door to desired location
and set into place.
4. When locating your coffee table, refer to the
Crystal Fire manual and maintain clearance to
combustibles.
4 | P a g e