Outback Power Systems TROOPER 359 User Manual

Gas Barbecues

Assembly and Operating Instructions for

Outback® Trooper, Outback® Hunter, and Outback® Ranger Gas Barbecues

Photographs are not to scale.
Specifications subject to change
without prior notice.

•

WARNING

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open barbecue lid or hood.

4. If odour continues, discontinue use and
contact your local dealer.

FOR YOUR SAFETY

For outdoor use only.

•

Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.

•

Warning: accessible parts may be very hot. Keep young children away.

•

Do not move the appliance during use.

•

Turn off the gas supply at the gas bottle after use.

•

Any modification of the appliance, misuse, or failure to follow the instructions may be
dangerous and will invalidate your warranty. This does not affect your statutory rights.

•

Retain these instructions for future reference.

•

Leak test your barbecue annually. Check the hose connections are tight and leak test
each time you reconnect the gas bottle.

0359

FOR YOUR SAFETY

1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.

2. A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.

A. Parts List

Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram’.

CODE PART QTY

A1 Hood (Pre-Assembled to Body) 1
A2 Heat Shield 1
A3 Handle 1
A4 Hinge Plate 4
A5 Gasket 4

HOOD

BODY

TROLLEY

HARDWARE

A6 Hinge Assembly 2
A7 Hinge Bolt 12
A8 Hinge Nut 12

A9 Heat Gauge 1
A10 Heat Gauge Nut 2
A11 Warming Rack 1

B1 Cooking Grill

B2 Reversible Cooking Griddle

B3 Lava Rock Basket

B4 Lava Rock (Packed in Basket)

B5 Body (see Part A1: Hood) 1

B7 Knob

B8 Control Panel 1

B9 Drip Tray 1
B10 Drip Tray Handle 1 1 1 1
B11 Hose and Hose Clip 1
B12 Burner

C1 Side Shelf 2

C2 Short Leg Front 1

C3 Short Leg Rear 1

C4 Long Leg Front 1

C5 Long Leg Rear 1

C6 Screen 1

C7 Trolley Base 1

C8 Leg Endcap 2

C9 Axle 1
C10 Wheel 2
C11 Hubcap 2

D1 Handle Nut 2

D2 Handle Washer 2

D3 Handle Spacer 2

D4 Handle Bolt 2

D5

D6

D7 Trolley Bolt 24

D8 Body Support Bolt 8

D9 Spacer 8
D10 Wingnut 8
D11 Washer 2
D12 Locknut 2










Outback®

Trooper

  

  

  

  
  

 Pre-Assembled Component
 Quantity varies according to model purchased
 Appearance, size, and construction may differ according to model purchased

Outback®

Hunter

  

  

  

  

  

  

  

  

  

2 2 1

N/A 1 1

2 2 1
2 2 1

2 3 4

  

2 3 4

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

Outback®

Ranger

2

B. Parts Diagrams

Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see hardware pack page.

A11

B5

A1

A2
A3

B1 B2

B3
B4

A4
A5
A6

A8
A7

A9

A10

B11

C1

D11 D12

C9

C10 C11

C3

C2

B7
B8

C6

C7

B12

B9

B10

C5

C4

C8

3

C. Hardware Reference Diagram

Specifications subject to change w ithout prior noti ce.

4

D. Assemb ly

TOOLS NEEDED FOR ASSEMBLY:

Medium size flat blade or Phillips/crosspoint screwdriver, adjustable spanner or metric spanner set

1

C5

C4

C7

C3

(Photo depicts trolley
from the reverse side)

C8

Attach the short (C2,C3) and long legs (C4,C5) to the trolley base (C7) using the trolley
bolts (D7). Take care to fix the legs with Velcro attached as shown in the illustration.

C2

D7

2

D7

C1

C3

C5

C4

C2

Attach the side shelves (C1) to the short (C2,C3) and long (C4,C5) legs using the trolley bolts

5