Outback Power Systems M-Series User Manual

M-Series
Rugged Mobile Power
VFX
Vented Construction
We believe that OutBack not only has a superior product, but as we’ve quickly learned, also has a tremendous customer and technical support team.
– Rick Thompson of Thompson Coach, Knoxville, TN
e OutBack M-Series inverter/charger is an all-in-one mobile power solution. It incorporates a true sinewave inverter, intelligent battery charger and an AC transfer switch which includes a 30 amp pass through and automatic neutral/ground switching.
All M-Series inverter/chargers produce virtually distortion free AC power for all your mobile electrical needs. Industry leading surge
power starts multiple heavy loads simultaneously without the need to run your generator. Innovative power factor corrected battery charging uses multiple stages to recharge your batteries quickly so your generator runs less. Ultra fast AC transfer switch with battery charger back off circuitry allows you to seamlessly take full advantage of your shore cord.
OutBack’s modular design makes expanding your power system as easy as adding an additional inverter/charger. Integrated network communications makes system setup and monitoring easy through a single MATE2M controller. Very quiet operation allows mounting in noise sensitive areas, even under a bunk. Repairs in the field are easy thanks to a simple three circuit board design.
True Sinewave AC Output
Fast Battery Charging
High Surge Power Capability
Extremely Rugged
Easy to Use
“Mount Anywhere” Design
High Efficiency
Neutral/Ground Switching
Networked Communications
Field Serviceable
e OutBack M-Series inverter is the superior choice when you need a reliable, powerful and modular true sinewave inverter/charger.
Standard 2 Year Warranty
e sealed OutBack M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis with gaskets and o-ring seals keep out water and resist corrosion. Simply put, the sealed M-series is designed to work where other inverter/chargers were never intended to go.
e vented OutBack M-Series has the same proven technology and conformal coated circuit boards as the sealed version but offered in a vented chassis for higher power output. e fully screened “bug-proof” openings keep the power conversion components cool in very hot environments even when operated at high power for extended periods in more protected environments.
M-Series Specifications
Sealed Models Vented Models
FX2012MT FX2524MT FX2532MT VFX2812M VFX3524M VFX3232M
Nominal DC Input Voltage 12 VDC 24 VDC 32 VDC 12 VDC 24 VDC 32 VDC Continuous Power Rating at 25° C 2000 VA 2500 VA 2500 VA 2800 VA 3500 VA 3200 VA AC Voltage/Frequency 120 VAC 60 Hz 120 VAC 60 Hz 120 VAC 60 Hz 120 VAC 60 Hz 120 VAC 60 Hz 120 VAC 60 Hz Continuous AC RMS Output at 25° C 17.0 amps AC 20.8 amps AC 20.8 amps AC 23.3 amps AC 29.2 amps AC 26.6 amps AC Idle Power Full ≈ 20 Watts ≈ 20 Watts ≈ 21 Watts ≈ 20 Watts ≈ 20 Watts ≈ 21 Watts Search 2.6 Watts 2.6 Watts 2.6 Watts 2.6 Watts 2.6 Watts 2.6 Watts Typical Efficiency 90% 92% 92% 90% 92% 92% Total Harmonic Distortion Typical 2% 2% 2% 2% 2% 2% Maximum 5% 5% 5% 5% 5% 5% Output Voltage Regulation ± 2% ± 2% ± 2% ± 2% ± 2% ± 2% Maximum Output Current Peak 56 amps AC 70 amps AC 56 amps AC 56 amps AC 70 amps AC 56 amps AC RMS 40 amps AC 50 amps AC 40 amps AC 40 amps AC 50 amps AC 40 amps AC AC Overload Capability Surge 4800 VA 6000 VA 4800 VA 4800 VA 6000 VA 4800 VA 5 Second 4000 VA 4800 VA 4000 VA 4000 VA 5000 VA 4000 VA 30 Minutes 2500 VA 3200 VA 2500 VA 3200 VA 4000 VA 4000 VA AC Input Current Maximum 30 amps AC 30 amps AC 30 amps AC 30 amps AC 30 amps AC 30 amps AC AC Input Voltage Range (MATE Adjustable) 80 to 150 VAC 80 to 150 VAC 80 to 150 VAC 80 to 150 VAC 80 to 150 VAC 80 to 150 VAC AC Input Frequency Range 54.0 to 66.0 Hz 54.0 to 66.0 Hz 54.0 to 66.0 Hz 54.0 to 66.0 Hz 54.0 to 66.0 Hz 54.0 to 66.0 Hz DC Input Range 10.5 to 17.0 VDC 21.0 to 34.0 VDC 28.0 to 45.3 VDC 10.5 to 17.0 VDC 21.0 to 34.0 VDC 28.0 to 45.3 VDC Continuous Battery Charge Output 80 amps DC 55 amps DC 35 amps DC 125 amps DC 85 amps DC 45 amps DC Minimum Recommended DC Breaker OBDC-250 OBDC-175 OBDC-125 OBDC-250 OBDC-250 OBDC-175 Recommended Battery Cable #4/0 AWG #2/0 AWG #2/0 AWG #4/0 AWG #4/0 AWG #2/0 AWG Recommended Battery Types Flooded lead acid, AGM, gel Flooded lead acid, AGM, gel Warranty Standard 2 year / Optional 5 year Standard 2 year / Optional 5 year Certifications ETL listed to UL458 ETL listed to UL458 Weight Unit 56 lbs (25 kg) 54 lbs (25 kg) Shipping 67 lbs (30 kg) 62.2 lbs (28 kg) Dimensions (H x W x L) Unit 13 x 8.25 x 16.25” (33 x 21 x 41 cm) 12 x 8.25 x 16.25” (30 x 21 x 41 cm) Shipping 21.75 x 13 x 22” (55 x 33 x 56 cm) 21.75 x 13 x 22" (55 x 33 x 56 cm)
e MATE2M is a complete management tool for your OutBack mobile power conversion system. e onboard CPU coordinates the operation of all your OutBack system components for maximum performance and smooth system integration.
A backlit LCD provides a display for system monitoring while four so keys allow navigation of the menu system and
adjustment of settings. Information for up to 10 inverter/chargers and other OutBack power conversion and control products is available at your fingertips through the communications HUB. Your programmed settings are stored in permanent memory to eliminate the need to reprogram the system in the event of a system shutdown or battery replacement.
e OutBack MATE2M includes a built in clock and calen­dar which allows timer based programming of power system operation. is enables the user to specify a generator’s run time to a specific time period of the day or week.
19009 62nd Avenue NE, Arlington, WA 98223
Phone: 360-435-6030 Fax: 360-435-6019 www.outbackpower.com
MATE2M Specifications
Operation 4 soft keys, dedicated inverter and AC input keys Input OutBack Cat5e RJ45 network cable Output (RS232 model only) RS232 serial to PC communication for data logging (optional software required) Display Back lit 4 line LCD System Monitoring AC/DC Voltage and Current Meters, Errors and Warnings Adjustable Parameters Shore Cord Amperage, Generator Start/Stop Settings Memory 32k nonvolatile flash RAM Dimensions HxWxD 4.5 x 6.25 x 1.5” (11 x 16 x 4 cm) Weight 1 lbs (454 g) Warranty 2 Year Standard / 5 Year Optional
Available From:
Loading...