Ouellet OTL3001C User Manual

Setpoint range limit pins

Temperature setting knob

Faceplate cover on

Faceplate cover off

Setpoint range limit positions

Two-wire installation

Four-wire installation

Mounting screw openings

OTL3001

About your new thermostat

This thermostat is designed to control an electric heating system
such as a baseboard heater or a fan-forced heater.

The thermostat CANNOT be used with:

• a resistive load under 1.25 A

• a resistive load over 12.5 A (120/208/240V)

• a system driven by a contactor or a relay (inductive load)

• a central heating system

Supplied Parts

• One (1) thermostat

• Two (2) screws

• Two (2) solderless connectors for copper wires
CAUTION: FIRE HAZARD

Special CO/ALR solderless connectors must be used if the
thermostat will be connected to aluminum wires.

Installation

WARNING: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect
power before beginning installation. The installation must be
performed by a certified electrician and must comply with
electrical codes of your region.

1. Connect the thermostat as shown at the bottom of the page.

2. Remove the thermostat faceplate cover by prying it from the
top or bottom with your fingers.

3. Install the thermostat onto the electrical box using supplied
screws.

4. To limit the setpoint temperature range, insert the pins in the
orifices corresponding to the minimum and maximum tempera­ture limits.

WARNING: ELECTRICAL HAZARD
Use only the supplied plastic pins. Do not insert metal objects
in the holes.

5. Place the faceplate cover back.

6. Apply power to the heating system.

MERCURY NOTICE
If this product is replacing a control that contains mercury in a
sealed tube, do not place the old control in the trash. Contact
your local waste management authority for instructions
regarding recycling and proper disposal.

Technical Specifications

Supply Minimum Load Maximum Load

120 VAC, 50/60Hz
208 VAC, 50/60Hz
240 VAC, 50/60Hz

Temperature setting range: 5°C to 27°C (41°F to 80°F)
Operating temperature: 0°C to 50°C (32°F to 120°F) non-condensing
Storage temperature: -20°C to 50°C (-4°F to 120°F)

1.25 A (150 W)

1.25 A (260 W)

1.25 A (300 W)

12.5 A (1500 W)

12.5 A (2600 W)

12.5 A (3000 W)

Customer Assistance

If you have any questions on the product, call our technical support
team at:

Ouellet Canada inc
180, 3rd Avenue
L’ISLET, Quebec, Canada G0R 2C0

Quebec area: 418 247-3947
Canada / U.S.: 1 800 463-7043
Fax: [phone]
Sales: [e-mail]
Web: www.ouellet.com

Warranty

ONE (1) YEAR LIMITED WARRANTY
OUELLET CANADA INC. warrants the component parts of the
OTL3001 against defects in material and workmanship for a one (1)
year period from the date of purchase, under normal use and service,
when proof of purchase of such is provided to the manufacturer.
The obligation of Ouellet Canada Inc., under the terms of this
warranty, will be to supply a new unit and this releases the
manufacturer from paying the installation costs or other secondary
charges linked to replacing the unit or the component part(s).

OTL3001 Printed in China / 06-2012 69-2750EF-02