Oster 137299, SPR-121409, FPSTFP4600 User Manual
10 CUP PROFESSIONAL FOOD PROCESSOR
PROCESADORA DE ALIMENTOS CON CAPACIDAD PARA 10 TAZAS
User Guide/ Guía del Usuario:
FPSTFP4600
Safety
Seguridad
How to use
Cómo usar
www.oster.com
Cleaning
Cuidado y Limpieza
Recipes
Recetas
Warranty
Garantía
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions before use.
2. To protect against risk of electrical shock, do not put food processor in water or any other liquid. This
may cause personal injury or damage to the product.
3. Close supervision is necessary when using this appliance near children.
4. Unplug from outlet when not in use, before putting on or taking o parts and before cleaning.
5. Do not contact moving parts.
6. Do not operate food processor with a damaged cord or plug or after the appliance malfunctions, or
is dropped or damaged in any manner. Return appliance to the nearest authorized service center for
examination, repair or mechanical adjustment.
7. The use of attachments not recommended or sold by the manufacturer may cause re,
electrical shock or injury.
8. Do not let cord touch hot surfaces or hang over table edges or counters.
9. Do not use your food processor if any part is broken.
10. Do not use outdoors or for commercial purposes.
11. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of
severe injury to persons or damage to the food processor. A scraper may be used but must be used only
when the food processor is not running.
12. Blade and processing disc are sharp. Handle carefully.
13. To reduce the risk of injury to persons, never place cutting blade on motor base without rst putting
container properly in place.
14. Be certain container cover is securely locked in place while operating appliance.
15. Never feed food into food chute by hand, always use the food pusher.
16. Be sure to turn o the food processor after each use.
17. Do not use this appliance for other than its intended use.
18. Do not attempt to defeat the cover interlock mechanism.
19. The small pusher should only be used in combination with the large pusher.
Do not use this piece by itself.
SAVE THESE INSTRUCTIONS
2
www.oster.com
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
This appliance has a polarized alternating current plug (one blade is
wider than the other). To reduce the risk of electric shock, as a safety
feature, this plug will t in a polarized outlet only one way. If the plug
does not insert fully in the outlet, reverse the plug. If it still fails to t,
contact a quali ed electrician. Do not modify the plug in any way.
DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.
EXTENSION CORD USE
A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord. An extension cord
may be used if care is exercised in its use. If an extension cord is used, the
electrical rating of the cord must be at least as great as the electrical rating
of the appliance. The extension cord should be arranged so that it will
not drape over the countertop or tabletop where it can be pulled on by
children or tripped over unintentionally.
Thank you for purchasing the OSTER® 10 Cup Professional Food
Processor. Before you use this product for the rst time, please take a few
moments to read these instructions and keep it for reference. Pay particular
attention to the Safety Instructions provided. Please review the product
service and warranty statements. Please do not return to the place of
purchase. To learn more about Oster® products, please visit us
at www.oster.com or call us at 1-800-334-0759.
www.oster.com
3
LEARNING ABOUT YOUR
10 CUP FOOD PROCESSOR
a
b
c
d
e
f
g
h
Small Food Pusher
a
Large Food Pusher
b
c
Food Chute Lid
d
Slice Disc
e
Shred Disc
Disc Stem
f
g
Dough Blade
h
Accessory Storage Bowl
Multi-purpose Blade
i
j
Bowl
k
Spatula
Base
l
m
m
i
j
k
l
Control panel
4
www.oster.com
BEFORE USING YOUR OSTER®
FOOD PROCESSOR
• When unpacking the product and removing packing material, handle
the chopping blade and slice/shred discs carefully: they are very sharp.
• Wash all parts except the Base in hot, soapy water. Rinse them dry.
These parts can also be placed in the dishwasher. Be sure to read the
Care & Cleaning Section of this manual to learn the correct methods
for taking the unit apart and cleaning.
HOW TO:
Using Your Food Processor
NOTE: Do not attempt to chop ice in this food processor; it will damage the
bowl and dull the Chopping Blade. This unit will not whip cream, beat egg
whites, grind co ee beans, spices or other items with high oil content, or slice
or shred hard-cooked eggs, marshmallows, or soft cheeses.
Important: For your protection, this unit has an interlock system. The
processor will not operate unless the bowl is properly locked onto the
base and cover is properly locked onto the bowl. Do not attempt to operate
the unit without the bowl lid, bowl and food chute lid correctly in place. Be
sure base is on a at, dry and clean surface before you begin processing.
NOTE: Before you begin, PLEASE BE SURE THAT THE ELECTRIC CORD IS
UNPLUGGED.
1 Using the PULSE control: You can control the texture of processed foods
better by using the PULSE button on your food processor. Simply press
and release to quickly turn the food processor on and o . This allows you
to check processed results and control the
consistency. For longer processing, continue
pressing the PULSE button.
2 Using the ON (Continuous) control: Add
ingredients through the feed tube; remove
the pusher and ll the feed tube as directed
(see How to Slice or Shred). Engage the pusher and press the ON button.
The LED will turn on and the motor will start. Press the Pusher rmly down
until all ingredients have passed into the work bowl. Remove the Pusher
and re ll ingredients as needed. Press the OFF button when nished.
Figure 1
3 O Setting- Processor should always be in the OFF position when not in use.
www.oster.com
5
How To Assemble The Bowl
Be sure the unit is unplugged. Put the bowl on top of
the food processor base, with the work bowl handle
just to the right of center. Turn the bowl clockwise until
the bowl clicks into place. The handle should now be
aligned with the center of the control panel. (Figure 2)
Select the appropriate attachment and assemble onto
food processor as directed in the chopping, kneading or
slicing/shredding sections. Place food or dough in bowl
if using multipurpose blade or dough blade.
NOTE: There is only one position for the bowl to lock
onto the base. The unit will not operate if the bowl does not lock
onto the base.
How to Lock the Cover
Place the lid on the bowl. Turn clockwise until the lid
clicks into place; the arrow on the lid will line up with
the arrow on the handle (the food pusher should be
positioned in the front). Your food processor features a
safety interlock system. The unit will not operate unless
the bowl and bowl cover are properly aligned and
locked into place. (Figure 3)
Figure 2
NOTE: When the cover is locked into position, the
safety mechanism on the cover and bowl will align. The
unit will not operate if the cover is not locked onto the
Figure 3
bowl.
NOTE: BOWL MUST BE LOCKED INTO BASE BEFORE COVER CAN BE LOCKED
INTO POSITION.
Plug unit into outlet. Turn the unit on by pressing the on button or pulse
button. Use the food pusher when using
the slicing or shredding discs. Press the food down slowly
and steadily with the pusher.
To stop your food processor, press the o button. Wait until the blade or disc
comes to a complete stop before removing the lid or bowl.
6
www.oster.com
How to Chop
NOTE: Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for
more than 3 minutes at a time.
Multipurpose Blade: Use multi purpose
blade for chopping, mixing, blending,
pureeing and preparing pu pastry,
crumbs and short crust pastry.
1 Lock the bowl onto base.
(See “How to assemble the bowl”)
2 Take the disc stem and slide it onto
the center post. Then grasp the
multi purpose blade by its stem and
slide over the disc stem. (Figure 4)
3 Place food into bowl.
4 Lock cover onto bowl.
(See “How to Lock the cover”)
Figure 4
5 Place the food pusher into the feed tube.
6 Plug the cord into an electric outlet. Use the Food Guide to prepare food
for chopping.
7 Press the ON button for continuous
processing or the PULSE button for short
processing tasks. When using the PULSE
setting, hold down the PULSE button for
about 2–3 seconds at a time, check results
and repeat if desired.
8 When nished processing, press the OFF button and allow the chopping
blade to stop rotating.
9 Twist the cover counter-clockwise to remove lid.
10 Hold the disc stem with multi purpose blade attached by its stem and
remove. Unlock the bowl by turning it counter- clockwise towards the
UNLOCK
mark, and lift o . Empty the processed food.
NOTE: The 10 Cup Food Processor comes with a spatula to easily empty
contents inside the bowl.
NOTE: Chopping Blade is very sharp, use caution when handling.
www.oster.com
7
How to Knead Dough
NOTE: NEVER TRY TO PROCESS DOUGH THAT IS TOO STIFF TO KNEAD
COMFORTABLY BY HAND.
NOTE: Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for
more than 3 minutes at a time.
Dough Blade: Use the dough blade for kneading bread dough and for mixing
batters and cake mixtures.
1 Lock the bowl onto base.
(See “How to assemble the bowl”)
2 Take the disc stem and slide it onto the
center post. Then grasp the dough blade
by its stem and slide over the disc stem
(Figure 5).
3 Place all the dry ingredients into
the bowl.
4 Lock cover onto bowl.
(See “How to Lock the cover”)
5 Place the food pusher into the feed tube.
6 Plug the cord into an electric outlet.
Figure 5
7 Press the ON button for continuous processing or the PULSE button for short
processing tasks. When using the PULSE setting, hold down the PULSE button
for about 2-3 seconds at a time, check results and repeat if desired.
NOTE: All liquid ingredients should be added through the food chute while
unit is processing. Add liquid in a slow, steady stream for even distribution. It
is important to add enough liquid to make the dough soft enough to knead.
Kneading dough that is too sti ca n strain the machine.
8 When nished processing, press the OFF button and allow the dough blade
to stop rotating.
9 Twist the cover counter-clockwise to remove lid.
10 Hold the disc stem with dough blade attached by its stem and remove.
Unlock the bowl by turning it counter- clockwise towards the UNLOCK
mark, and lift o . Empty the processed food.
NOTE: The 10 Cup Food Processor comes with a spatula to easily empty
contents inside the bowl.
8
www.oster.com
How to Slice or Shred
NOTE: Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for
more than 3 minutes at a time.
Slicing and Shredding Discs: Use these discs for slicing and shredding meats,
fruits, vegetables, cheeses and more.
1 Lock the bowl onto base.
(See “How to assemble the bowl”)
2 Slide the Disc Stem onto the center post
of the base. With the desired side facing
up (slicing or shredding), push the slice/
shred disc onto the disc stem (Figure 6). Use
caution when handling disc, blades
are extremely sharp.
3 Lock cover onto bowl.
(See “How to Lock the cover”)
4 Plug the cord into an electric outlet. Turn
machine on by pressing the ON button.
5 Put ingredients in the feed tube and press
the food pusher lightly onto the ingredients
(Figure 7). The small pusher should only be
used in combination with the large pusher.
Do not use this piece by itself.
7 When nished processing, press the
OFF button and allow the disc to stop
rotating. Twist the cover counter-clockwise
to remove lid.
8 Carefully remove the Shredding Disc. Unlock
the bowl by turning it
counter- clockwise towards the
UNLOCK
NOTE: Shredding Disc is very sharp, use caution when handling.
IMPORTANT: Use GENTLE force to press down on the food pusher. Excessive
force could cause damage to the disc.
mark and lift o . Empty the processed food.
Figure 6
Push
Figure 7
• Press the ingredients down slowly and steadily with the pusher.
• Precut large chunks of food to t the size of the feed tube.
• For best results, ll the feed tube evenly.
• When processing large quantities, process small batches at a time and empty
the bowl between batches.
www.oster.com
9
Loading...