Page 1
accuracy in sound
Page 2
2M 78 2M Mono 2M Red 2M Blue 2M Bronze 2M Black
2M 78 Verso 2M Mono Verso 2M Red Verso 2M Blue Verso 2M Bronze Verso 2M Black Verso
2M 78 PnP MkII 2M Mono PnP MkII 2M Red PnP MkII 2M Blue PnP MkII 2M Bronze PnP MkII 2M Black PnP MkII
Output vo ltage at 1 kHz, 5 cm/s ec. 4 mV 4 mV 5.5 mV 5.5 mV 5 mV 5 mV
Frequency range at -3 dB 20–20,000 Hz 20–22,000 Hz 20–22,000 Hz 20–25,000 Hz 20–29,000 Hz 20–31,000 Hz
Tracking ability at 315 Hz
at recommended tracking force
Compliance, dynamic, lateral 18 µm/mN 18 µm/mN 20 µm/mN 20 µm/mN 22 µm /mN 22 µm/m N
Stylus type Spheri cal N ude Sphe rical Elliptical Nude Elliptical Nude Fine Line Nu de Shibata
Tracking force recommended* 1.8 g (18 mN) 1.8 g (18 mN) 1.8 g (18 mN) 1.8 g (18 mN) 1.5 g (15 mN) 1.5 g (15 mN)
Load resistance* 47 kOhm 47 kOhm 47 kOhm 47 kOh m 47 kOhm 47 kOhm
Load capacitance* 150–300 p F 150–300 pF 150–300 pF 150–30 0 pF 150–300 p F 150–300 pF
2 3
*Recommended
70 µm 70 µm 70 µm 80 µm 80 µm 80 µm
Page 3
About the Ortofon 2M Series cartridges
Thank you for choosing the Ortofon 2M magnetic cartridge system for high performance
sound reproduction of your favourite analogue records.
Our company has been working with sound reproduction since 1918. Ortofon developed
its first phono cartridge in 1948, since then more than 300 different phono cartridges
have been developed and manufactured. Reflecting our extensive experience in
industrial design and technological know-how we have become the global leader in the
manufacture and supply of phono cartridges.
The 2M Series has been engineered in accordance with the highest standards and is
congruent with Ortofon’s unrelenting commitment to providing the most precise and
accurate reproduction possible without coloration.
The 2M Series comprises of two configurations: 2M for top mounting and 2M Verso
for bottom mounting. Each configuration consists of 2M 78, Mono, Red, Blue, Bronze
and Black models, which weight and size have been optimized to fit the most common
turntables on the market to-day.
As a result of reviewer listening tests we feel confident that you will appreciate and enjoy
the unique qualities of these cartridges.
4 5
Warning
This phono cartridge is only for
mounting on tonearms and must
not be used for other purposes.
Page 4
Mounting the 2M cartridge
1. Remove stylus unit with stylus guard before working with leads and screws. Handle all
parts carefully. (fig. 1-2)
2. Note colours and channel indications on rear side of the body for correct connection of
the tone arm leads. (fig. 3)
Fig. 1
Fig. 2
White L+
Red R+
3. The Ortofon packing contains a pair of screws with a thread length of 5 mm. The
screws are to be used with headshell thicknesses of max. 3.5 mm. The 2M threaded
mounting plate has a thickness of 3 mm.
Green RG
Blue LG
Fig. 3
6 7
Page 5
Do not tighten screws completely before the stylus unit has been remounted (fig. 1) – to
2M Verso bottom mount2M top mount
Fig. 4
To check that you are using the right length of screws – please observe that screws must
not touch the body under the mounting plate – look into the small openings on each side
of the body. (fig. 4)
adjust stylus overhang refer to the record player or tone arm manual and cartridge
dimensions. (fig. 5)
Never overtighten screws and never use aluminium screws, as they can get stuck in the
threaded holes of the mounting plate.
Note: If excessively long screws are used and are pressing against the body material, this
may influence channel separation and could damage the cartridge body. In case
of such damage the Ortofon warranty will be void.
4. Adjust tone arm parallel to record surface, adjusting anti-skating and stylus pressure
according to cartridge recommended data and record player manual.
8 9
Page 6
Fig. 5
18.0 mm12.7 mm
24.0 mm 18.5 mm3.5 mm
M2.5 mm
20˚
6.0 mm
18.5 mm
Stylus care and maintenance
To obtain optimal sound reproduction, remove dust from stylus regularly by using the
enclosed small brush.
If the headshell can be easily
removed from the tone arm, we
recommend that you turn the
diamond upwards and brush
gently forward in the direction
of the diamond tip along the
cantilever.
We do not recommend the use of
propyl alcohol (or other cleaning
fluids) for cleaning the cartridge,
as the diamond cement as well as
the suspension system could be
seriously damaged and thereby
ruin the cartridge.
Fig. 6
10 11
Page 7
Stylus guard
Remove the stylus guard before use by holding at the front and rear of the guard and
gently pressing the rear while tilting it downwards. (fig. 7-8)
Fig. 7 Fig. 8
12 13
How to replace M2.0 mm screws on 2M Verso
• Remove the stylus with the stylus protection guard from the cartridge body to avoid any
damage to the diamond
• Using Torx 8 key, unscrew the black screw from the Verso top plate
• Remove the top plate from the cartridge body by pulling the screws off
• Remove the two countersunk screws from the top plate
• Insert the two M2.0 mm screws in the top plate
• Mount the top plate on the cartridge body. Hold the top plate with screw-threads
hanging down and turn the cartridge body 180 degrees. Mount from above
• Mount the black screw in the top plate and tighten with appropriate force
• Mount the cartridge on the tonearm using the enclosed tool
• Mount the stylus with the stylus protection guard on the cartridge body
Page 8
2M Headshell features
• Universal mount fitting a wide range of tonearms.
• The headshell body is manufactured from a special compound used for Medical
industry, ensures high rigidity while reducing unwanted vibration
• Distance to connector 52 mm. Headshell with a 2M cartridge pre-mounted provides
correct Baerwald alignment with the major part of tonearms with universal mount.
• Headshell weight 12.8 g
• Headshell weight with a 2M cartridge pre-mounted 20 g
14 15
Page 9
Get more information
about 2M cartridges.
Ortofon A /S | Stavangervej 9 | DK-4900 Nakskov
Tel. +45 54 91 19 15 | www.ortofon.com
08-2017/5-8 00152-12
Loading...