Thank you for your purchase of Orion's XTR Coaxial Speakers. These speakers offer
renowned Orion excellence in every high performance speaker system. Designed for
OEM applications, the XTR coaxial speakers will fit standard 4", 5.25",6", 6.5" round
and 4"x6", 5" x 7", 6" x 9"oval mounting locations.
We at Orion strive to give you all the latest up to date information about this product.
What we can't give you in this manual is personal installation or technical experience.
If you have questions concerning the use or application of this product, please refer to
the nearest Authorized Orion Dealer for assistance or call the Orion technical support
hot-line at -800-876-0800 as we are always finding new ways to improve our product,
the features and specifications are subject to change without notice.
PRACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over 100dB may cause permanent
hearing loss. High powered automotive sound systems can generate sound pressure
levels in excess of 130dB. When playing your system at high levels, please use hearing
protection and prevent long term exposure.
Model Number: ____________________________
Serial Number: ____________________________
Date of Purchase: ____________________________
WHAT’S IN THE BOX
Included in this box are all the necessary mounting hardware and cables for your basic
installation. Listed below is a detailed list of the components included in this system
package.
Listed are the majority of the tools required to perform the installation. Having
the proper tools will make the installation much easier. Some of these tools are
required.
The performance of the XTR coaxial speakers is directly proportional to the quality of
installation. Care taken during the installation process will be rewarded with years of
satisfying performance. If you are unsure about your installation capabilities, please
refer to your local Authorized Orion Dealer for technical assistance. Orion dealers are
trained professionals dedicated to obtaining the maximum performance out of your
Orion system. If you decide to install this speaker system yourself, please read the
entire installation section before starting your installation.
Choosing the correct speaker locations will have the greatest effect on the sound
quality of the system. Different considerations are needed when choosing the
locations that best suit your needs. The locations must be large enough for the
speakers to fit. Care is needed to ensure that the location you have chosen will not
affect any of the mechanical or electrical operations of the vehicle.
Determining the best location for the speakers will depend on your cosmetic needs
and your vehicle's interior. If minimal intrusion in your vehicle is desired, factory
speaker locations may be the ticket for you. Placing the speaker in the factory location
can often give very desirable results.
DOOR MOUNTING
When checking for possible speaker locations in the doors, check the operation of the
window and all of the doors assemblies. There is also a stabilizer stop bar in between
the door and the door jamb. This bar prevents the door from opening too far. Pay
particular attention to this so you do not damage the speaker when you close the
door.
Figure 1
Figura 1
Abbildung 1
Inside
of Door
Speaker installed
with no gaps
or air leaks
Dampening on
top of outer
door skin
Speaker
cut out
Door
Panel
Dampening Mat
Coaxial
Driver
Grille
Screws
REAR DECK MOUNTING
In rear deck installations, check the operation of the trunk suspension springs or
tension bars. These tension bars move in the opening and closing of the trunk. You
cannot be too cautious during this part of the installation, In addition, do not locate
the speakers too close to the back of the rear deck. Mounting the far screws will only
MODEL XTR402XTR462XTR522 XTR572 XTR602XTR652XTR693
Nominal
Impedance (ohms)
Power Continuous/
Maximum (watts)
Frequency
Response (Hz)
Sensitivity (dB)86868689868689
Mounting
Depth (inches)
Mounting
Diameter (inches)
4444444
50/8050/8050/10050/10050/10060/120100/180
120 to
22k
1.891.892.282.171.752.013.23
4.063.66 x
90 to
22k
6.11
85 to
22k
4.724.96 x
80 to
22k
7.17
85 to
22k
5.205.045.79 x
85 to
22k
55 to
22k
8.43
FEATURES
Conemoisture and UV resistant paper cone
SurroundButyl Rubber
Voice Coil2 layer copper wire on a Kapton former
Tweetersilk dome - Ferrofluid
SpiderNomex
Stamped steel baskets with Euro mounting configurations
Two way systems have custom crossover with 6 dB high pass, 6 dB low
pass and tweeter protection (6dB high pass only on XTR402)
Swivel tweeter (on select models only)
NOTE: All specifications are subject to change without notice.