Orion TMIP35 Specsheet

ON-SITE INSTALLATION & MAINTANCE OF CAMERA
SPECIALIZING IN MONITOR & VIDEO PROCESSING
OVERVIEW
ORION Images new CCTV tester TMIP35 is developed for the on-site installation and maintenance of IP, analog camera. Also this CCTV tester dveloped for video system installer with video display, PTZ control, DC12V output power, audio, color pattern generator, RS-485 data searching and cable testing. This unit has functions include POE power supply testing, PING testing, IP address scan, video screen shot, video record, image magnification, port flicker, cable search, LED lamp etc. The TMIP35 CCTV tester is designed for easy operation and portable to carry for the technician or installer, which helps improve work efficiency by reducing time in the field.
FEATURES
3.5” TFT-LCD, 480 (RGB) x 320 LED Lamp, easy to operate at night 4GB Micro SD card included video record & playback, snapshot & save the current image at JPG file User defined shortcut keys (F1 and F2) LCD screen brightness / contrast / color saturation adjustable Automatically adapts and displays the video format of NTSC / PAL, 10 x zoom PING testing, test for IP camera or other network devices ethernet port IP address scan is searching the IP address for the connected IP cameras, wireless AP and PD devices POE voltage measurement is testing PoE switch’s voltage to IP cameras, wireless AP & DP devices Device port flicker is to find the connected PoE switch port & connected PoE will flicker at special frequency Link monitor is to check any occupied IP address setting Network cable & Telephone cable testing displays the sequence of connection & the No. of LAN cable Support RS232 / RS485 / RS422, Rate 600 ~ 115200bps adajustable Multi-protocols are supports more than thirty PTZ, such as PELCO-P, PELCO-D, SAMSUNG PTZ protocol analysis is to check RS485 transmission is notmal or fault device PTZ control is adjust Pan / Tilt / Zoom of lens focus, aperture and preset position of camera DC12V 1A power output for camera Audio input test is testing the audio signal from pickup devices Lithium Ion Polymer battery is last up to 11 hours for nomal use after 4 to 5 hours of charging
Contract No. GS-03F-0152X
PoE
.......................................
Power Over Ethernet
480 x 320 4GB SD
.......................................
3.5” Screen Size
.......................................
Micro SD Card
TMIP35
MAJOR FUNCTIONS
CCTV TESTER
Video Signal Testing
This new CCTV tester is built-in high definition 3.5” LCD TFT 480 x 320 full view display screen, easy and directly display the camera image quality support PAl / NTSC. LCD screen Brightness / Contrast / Color Saturation adjustable. Suitable for field construction and maintenance work.
BNC Cable
Camera Power
Cable
Video Signal Level Test
Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image. It also can real-display the video level value, if out of range, notices will be display in the screen.
DC12V 1A Output Power
Power the camera with DC12V 1 A power output from the tester. It is helpful for demo and testing when the power supply is not available.
BNC Cable
Camera Power
Cable
Audio Testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
Cable Tester
Test LAN cable or telephone cable. Connect LAN cable or telephone cable with CCTV tester and cable tester then the connecting status, cable type and the sequence of wires will be displayed as well as the serial number of the cable tester kit.
PTZ Controller
Display the input video images. Pan / Tilt the P/T unit and zoom in / out of the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan /tilt speed; set and call preset position.
Enhanced Color Bar Generator
Video Generating, the PAL / NTSC multi-system color bar video generator (Eight-system switchable, transmit / receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. Also judge whether the color is different because of transmission loss or interference, it suitable for video transmission of the field tests, such as optical video transmitter and receiver, video cable etc.
Image Magnification (10x Zoom)
Set image 10x zoom can view and display the details by 1x, 2x, 3x, 4x, 5x, 6x, - 10x zoom in the monitor and tester.
Video Snapshot
Capture the video image and save the current video frames as JPEG file.
Contract No. GS-03F-0152X
Loading...
+ 2 hidden pages