Orion OLW-4651, OLWU-5550, OLW-5550, OLWU-5520 User Manual

Hybrid Video System

ORION CO.,LTD.

www.oriondisplay.net

• 2015.08.03

Thank you for purchasing our MLCD.

Please read through this user's manual for safety before installing this product.

This product is manufactured for Multi LCD model only.

User’s Manual

OLW-4651 | OLW-5550 | OLWU-5520 | OLWU-5550

Address: 217, 1gongdan-ro, Gumi-si, Gyeongsangbuk-do, Korea

Tel : [phone], Fax: [phone]

A revolutionary MLCD

A revolutionary MLCD

Hybrid Video System

- 1 -

Hybrid Video System

MAIN FRAME

(refer to page 16~17)

DVI Converter
(ODC-10000)

19" Rack

Guide Pin(4pcs) CAT-6 Cable(1EA)Power Cable DC Power Cable(1EA) RS232 Cable(1EA)User's Manual

Power Module Image Processor Module

Multi-Screen Control

System(MSCS)

VIDEO Cable

(1ea per panel)

The length may vary according to

customers’ request.

(2, 3, 5, 7, 10, 15, 20. 30M)

COMM Cable

(1ea per panel)

The length may vary according to

customers’ request.

(2, 3, 5, 7, 10, 15, 20. 30M)

DC Power Cable

(1ea per panel)

The length may vary according to

customers’ request.

(2, 5, 8, 10, 15, 20M)

Features of MLCD

▶ Enjoy a wide flat screen with high brightness and high quality.
▶Easy to install and move due to its thin design
▶ Enjoy your favorite programs with various split-screen features simultaneously presenting

several programs.

To prevent electric shock, Do not remove cover.
No user serviceable part inside
Refer servicing to qualified service personal.

Warning

Thank you for purchasing our MLCD monitor.

This manual describes how to use the product and notes in use.
Please read the manual carefully before using it.
After reading this manual, please retain for future reference.
If you have any questions or a problem occurs, please contact either the company you purchased this
product from or an authorized service center.

※Displaying static picture for an extended period of time may cause an burn-in effect.
※ Burn-in effect and the faults in brightness and picture elements caused by fixed images are not subject

to the warranty coverage.

If you fail to comply with the regulations for safety and proper use,
fire or injury may be caused.

Warning

Supplied Accessories

Optional Accessories

Notice to users

Class A digital device

It is a device designed for business purpose with a safety certificate for electromagnetic interference, which
user should be mindful of.

" Important Safety Instructions"

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specied by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
The symbol in gure 21 shall be shown adjacent to the text of item 12 above.

- 2 - - 3 -

ORION

Hybrid Video System

Contents

1. Safety Precautions ...................................................................................................................................................10

2. Guidance for Users .................................................................................................................................................12

2.1. LCD Panel ...................................................................................................................................................................... 12

2.2. Receiver Module ...........................................................................................................................................................13

2.3. Power Module ............................................................................................................................................................... 14

2.4. Image Processor Module .............................................................................................................................................15

3. How to Install ................................................................................................................................................................16

4. How to Connect Cables ......................................................................................................................................18

4.1. Single Image Processor Connection (for One 2X2 MLCD formation) ......................................................................18

4.2. Multi Image Processor Connection (for two or more 2X2 MLCD formation) ...........................................................20

5. Setting and operation of MSCS software ...............................................................................................22

5.1. MSCS Installation ...........................................................................................................................................................22

5.2. Start MSCS ....................................................................................................................................................................23

5.3. Control signal connections ......................................................................................................................................... 24

5.3.1. Setting of COM Port ...................................................................................................................................................24

5.3.2. Setting of LAN Port ..................................................................................................................................................25

5.4. "New design/Last design" setting ...............................................................................................................................30

5.5. Selecting the command transmission method ...........................................................................................................31

5.6. Image Processor Configuration ...................................................................................................................................32

5.7. Multi Screen Configuration ...........................................................................................................................................33

5.9. Power On/Off ................................................................................................................................................................. 37

5.8. Input Channel Change ................................................................................................................................................. 38

5.8.1. Play button .................................................................................................................................................................38

5.8.2. Mouse (left button use) .............................................................................................................................................39

5.8.3. Mouse Drag & Drop ..................................................................................................................................................40

5.10. Loop Out (Daisy-Chain Out) Channel Configuration .............................................................................................41

5.11. Slide Show ................................................................................................................................................................... 42

5.12. Picture Control ............................................................................................................................................................. 47

5.13. Timer Control ...............................................................................................................................................................48

5.14. Equalizer Control ......................................................................................................................................................... 49

5.15. Option Control ............................................................................................................................................................. 51

5.16. ORION Homepage log on and Version Information ................................................................................................52

6. MSCS Protocol ............................................................................................................................................................ 53

※Attachment : ASCII to HEX Conversion Table ...............................................................................................................74

7. Before calling for service .................................................................................................................................... 75

8. DVI Resolution .............................................................................................................................................................76

9. Specification .................................................................................................................................................................77

NOTICE

1. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable

2. WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To
Rain Or Moisture.

3. Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such
as vases, shall be placed on the apparatus.

4. Use only a properly grounded plug and receptacle

5. "Warning" CAUTION – These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualied to do so.

6. "Warning" CAUTION – These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualied to do so.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and
maintenance(servicing) instructions in the literature accompanying the appliance.

※

Cautions for consisting System

Caution for the other control program besides MLCD Control
Program (MSCS)

- If you want to use automatic power on/off function that make MLCD turned on/off by
connecting main power, allow at least 20 seconds of Stand-by time before MLCD is
turned on, when you make control program.

- If RS-232C communication signal or other image signal is applied to 9 or more sets
simultaneously, communicational error may occur. (Power on & Broadcast)

Environmental condition for installation

- Since MLCD panel is very sensitive for physical impact, installation requires
considerable caution.

- Minimum clearance(20cm) must be secured for smooth ventilation. (See page
5, 16~17)Installation must avoid air tight or near air tight places. Improper
ventilation causes malfunction and shortens product lifetime by rapid internal
temperature rise. If MLCD has to installed at the improper ventilation, additional
ventilation openings or fans must be provided to keep the internal temperature
between 0 ~ 35˚C.

- For ground of MLCD and application devices, it should be connected as frame
ground.

- Considering MLCD Max power consumption, check the main electric specication.

Consideration for easier service

- When you design the exterior design for MLCD system, consider easier disassembly
for possible service occasion in the future.

- The sliding Universal Unit of ORION is recommended for easier service.

- If service people can step into the backside of MLCD system, it can greatly reduce
time and effort for service.

- In case of higher locations, consider the installation location and exterior design for
easier service.

- 4 - - 5 -

ORION

Hybrid Video System

WARNING

WARNING

- When you install MLCD, make sure there is at least 20cm clearance for
effective ventilation and do not seal off MLCD sets.
If MLCD sets are installed at the locations of bad ventilation, the inner
temperature can be raised rapidly and it can cause frequent malfunctions and
rapid reduction of the product life.

※ Ventilation space in front of MLCD must be furnished for heat dispersion.If

the front space of MLCD has to be sealed, there must be consideration for
the heat dispersion in the rear side of MLCD.

※

Clearance for Ventilation

- 6 - - 7 -

ORION

Hybrid Video System

WARNING

WARNING

PANEL

PANEL

PANEL

PANEL

CUSHION

PANEL

WarningWarning

※

Handle with Caution.

- Shock/Impact on the set's sides will result in
internal circuit damages.

- The edge/bottom of the panel are fragile.
Use shock-absorbing pads or rugs for laying down
the product.

• Please do not stand LCD
alone. It may fall or slip off
and Panel can be broken
or damaged.

• If you need to stand LCD,
you must use handles on
the back and lean over
the LCD to avoid panel
touches ground or oor.

• Please do not lean over
the LCD. It may damage
the bottom part of the
LCD.

• If you need to lay down
LCD as face down
position, please use
shock-absorbing pads
under the LCD.

• Please do not lean over the
LCD toward the edge part.
It may damage the edge
part of the LCD.

• If you need to lay down
LCD as face up position,
please be cautious for falling
objects on the surface of
the LCD.

※

Please keep following instruction
for panel protection without
exception.

- This product can be damaged even with minor
impact for its nature.
Please keep following instruction to carry or
store the products.

- 8 - - 9 -

ORION

Hybrid Video System

WARNING

WARNING

※

How to carry MLCD

It always needs two persons to carry or install MLCD.
When you carry MLCD with up straight manner, please hold handles on the back and

bottom part of the panel together.
Please be careful not to touch the bottom part of the panel when you put down the

panel.

Please do not touch the panel with your hand.

When you carry MLCD with atbed manner, please hold handles on the back and
lower part of the back.

Please be careful not to touch the bottom part of the panel when you put down the
panel.

※

Application information

If static images are displayed on the screen for a long time, it causes burn-in
image.
Please keep the following instruction to optimize the lifetime and functions of the
product.

1. Operating condition

- Temperature: 20 ± 15˚C

- Humidity: 55 ± 20 %

- Display pattern: moving picture or regular switchover display

- Environmental condition : Well ventilated place is recommended.

- Power off and screen saver : Periodical power-off or screen saver is needed after long-term static
display.

※

Note : Moving picture or black pattern is strongly recommended for screen saver.

2. Operating methods to minimize burn-in image due to long-term static information
display

- Suitable operating time : under 20 hours a day.

- Periodical display contents change from static image to moving picture.

- Periodical background color and character (image) color change

DEPARTURE

ÅÆ

DEPARTURE

Flight No. Time Gate Flight No. Time Gate

UA 012 11:20 A02 UA 012 11:20 A02

KE 732 12:10 K17 KE 732 12:10 K17

AN 291 12:45 F11 AN 291 12:45 F11

- Change the images of little luminance difference between the background and characters, periodically.

DEPARTURE

Æ

DEPARTURE

Æ

DEPARTURE

Æ

DEPARTURE

Flight No. Time Gate Flight No. Time Gate Flight No. Time Gate Flight No. Time Gate

UA 012 11:20 A02 UA 012 11:20 A02 UA 012 11:20 A02 UA 012 11:20 A02

- It is not recommended to display the images of huge luminance difference between the background
and characters or the images of grey tone.

ARRIVAL

(X)

ARRIVAL

(X)

Flight No. Time Gate Delay Flight No. Time Embark Delay

AA 213 9:20 K11 On time AA 213 9:20 New York On time

OZ 621 11:25 G21 10 min. OZ 621 11:25 Seoul 10 min.

JA 032 12:05 A19 On time JA 032 12:05 Beijing On time

- Scroll the characters periodically.

DEPARTURE

Æ Æ

DEPARTURE

Flight No. Time Gate Flight No. Time Gate

UA 012 11:20 A02 UA 012 11:20 A02

KE 732 12:10 K17 KE 732 12:10 K17

AN 291 12:45 F11 AN 291 12:45 F11

(Whole Screen Scroll)

DEPARTURE

Flight No.

Time

Gate

UA 012

UA 012

11:20

A02

13:40

K17

UA 012

17:03

A02

- 10 - - 11 -

ORION

Hybrid Video System

1. Safety Precautions

• If it operates abnormally, stop using it
immediately.

• Please refer to a specialized
construction company for installing
stand or wall mount unit. Otherwise,
damage or injury may be caused.

• Avoid any action to damage the
power cord or power plug. It may
cause fire or electric shock.

• Do not alter (or disassemble) the
product. It may cause electric shock
since high voltage is flowing inside.

• Do not place any liquid-containing
container on it. If the inside is wet, it
may cause electric shock or fire.

• Do not touch the device when
lightning strikes.

• Do not pull out the power plug with
a wet hand. It may cause electric
shock.

• Do not install the product where it
may be exposed to direct sunlight
or near any heating device. It may
shorten the product's life span or
cause failure.

• Do not put any foreign material into
the product. It may cause a failure or
shorten the life span.

• Do not install in an unstable location
It may cause injury.

• Do not exceed ratings of AC outlet
or extension cords. It may cause
failure.

• Make sure the product is not covered
with any object. If the ventilation hole
is blocked, the inside temperature may
rise to cause overheating resulting in
fire.

• Do not poke the front screen with
sharp material. It may damage the
screen and may cause malfunction of
the product.

• Do not lean against the product or
keep it leaned. It may cause injury or
failure.

• Do not put it at any place with much
humidity, dust, oil, smoke or steam. It
may cause failure.

• If you do not want to use the product
for a long time, keep the power plug
unplugged to save electricity.

• The socket-outlet should be installed
near the equipment and be easily
accessible.

• Do not put any heavy object on it.
It may cause failure.

• Do not pull out or hang down the
connection cable. It may damage the
cord to cause fire or electric shock.

• Pull out the power plug by holding the
plug. Otherwise, it may damage the
power cord to cause fire or electric
shock.

• Do not ride or step on the product
It may cause breakage when fallen
down.

• When moving it, disconnect the
connecting cable. Otherwise, it may
damage the cable to cause fire or
electric shock.

• Install the product on safe and flat
surface.

• Do not put candles on the product. If
the liquid flows inside the product. It
may cause electric shock or fire.

• Do not touch product’s front surface
with hand. Otherwise, the image
quality can be lowered.

- 12 - - 13 -

ORION

Hybrid Video System

2. Guidance for Users

2.1. LCD Panel

2.2. Receiver Module

¡¡ Upper¡Deck¡

LVDS OUT

①.

LVDS OUT : Output port for transferring LVDS signal to LCD Panel

¡¡ Lower¡Deck

BLU1 BLU2 PWR VIDEO COMM ID

RECEIVER
MODULE

0

1

2

3

4

5

6

7

8

9

①.

BLU1 ~ BLU2 : Power supply and control signal input ports for the back light unit in LCD panel

②.

VIDEO : Image signal input port

③.

COMM : Control signal input port

④.

ID : ID configuration switch for Receiver Module

¡¡ Front

¡¡ Rear

Receiver Module

- 14 - - 15 -

ORION

Hybrid Video System

¡¡ Front¡

OUTPUT 1 OUTPUT 2 ID OUTPUT 3 OUTPUT 4

IMAGE PROCESSOR MODULE

IN : DVI 1
NO SIGNAL

IN : DVI 1
NO SIGNAL

IN : DVI 1
NO SIGNAL

IN : DVI 1
NO SIGNAL

0

1
2

3

4

5

6

7

8

9

①.

Output 1 ~ 4 : Indicates the operating status of each Image Processor.

- Firmware information

- Input port information for image signal

- Input image resolution

- On/Off information for image output port (If the window is off, the port is off.)

②.

ID : ID input switch for image Processor (For multi Image Processors)

¡¡ Rear¡

PWR

LAN

P-CON

232IN

232OUT COMM4 VIDEO4 COMM3 VIDEO3 COMM2 VIDEO2 COMM1 VIDEO1

DVI IN4 DVI IN3 DVI IN2 DVI IN1 LOOP IN LOOP OUT

①.

PWR : Power input port for Image Processor Module

②.

LAN : Ethernet signal input port

③.

P-CON : Power Module control port

④.

232IN : RS-232C signal input port

⑤.

232OUT : RS-232C signal output port (for Daisy Chain)

⑥.

DVI IN1 ~ 4 : DVI signal input ports

⑦.

LOOP IN : DVI signal input port for multi Image Processors

⑧.

LOOP OUT : DVI signal output port for multi Image Processors

⑨.

COMM1 ~ COMM4 : Receiver Module control signal output port

⑩.

VIDEO1 ~ VIDEO4 : Receiver Module image signal output port

2.4. Image Processor Module

¡¡ Front¡

PWR 1
PWR 2

PWR 3
PWR 4

PWR IP

PWR S

FAN1

AC

FAN2

POWER MODULE

①.

PWR 1 ~ PWR 4 : Indicator LEDs of the power output port for the Receiver Module 1 ~ 4

②.

PWR S : Indicator LED for the back-up power output port

③.

PWR IP : Indicator LED of the power output port for Image Processor Module

④.

FAN1 ~ FAN2 : Indicator LED for the fans in the front

⑤.

AC : Indicator LED for AC power input

¡¡ Rear

PWR 1PWR 2PWR 3PWR 4PWR IP P-CON

POWER

AC INPUT

OFF ON

①.

POWER : AC Power On/Off switch

②.

AC INPUT : AC Power input port

③.

PWR IP : Power output port for Image Processor Module

④.

PWR 4 : Power output port for Receiver Module 4

⑤.

PWR 3 : Power output port for Receiver Module 3

⑥.

PWR 2 : Power output port for Receiver Module 2

⑦.

PWR 1 : Power output port for Receiver Module 1

⑧.

P-CON : Control signal input port for Power Module

2.3. Power Module

- 16 - - 17 -

ORION

Hybrid Video System

Hanger

행거볼트

LCD

MAIN
FRAME

가이드핀

Hanger

행거볼트

LCD

MAIN
FRAME

WALL BRACKET

20cm

20cm

20cm

20cm

20cm

20cm20cm

3. How to Install

가이드핀

Install¡on¡a¡MAIN¡FRAME¡Stand

Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.

MAIN¡FRAME¡Stand¡Unit¡(Option)

• The set can be installed as shown below.
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)

• Please do not install our product at following locations to protect the product
and prevent possible malfunction.

- Places of vibration or shock: LCD set may fall and damaged

- Next or near to Sprinkler sensors: The sensors may detect heat from a set and sprinkler can be activated.

- Around high voltage power lines: Noise from the power line may affect screen images

- Around heating apparatus: LCD set may be overheated and damaged.

MAIN¡FRAME¡Wall¡Mounting¡Unit¡(Option)

• The set can be installed on the wall as shown below.
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)

Mount¡on¡the¡MAIN¡FRAME¡wall

Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.

• Please check the stability of wall.
If the wall is not strong enough, reinforce the wall before installation.

• Please connect all the cables to proper ports in a set before installation.

- 18 - - 19 -

ORION

Hybrid Video System

BLU1 BLU2 PWR VIDEO COMM ID

RECEIVER
MODULE

PWR 1PWR 2PWR 3PWR 4PWR IP P-CON

POWER

AC INPUT

OFF ON

PWR

LAN

P-CON

232IN

232OUT COMM4 VIDEO4 COMM3 VIDEO3 COMM2 VIDEO2 COMM1 VIDEO1

DVI IN4 DVI IN3 DVI IN2 DVI IN1 LOOP IN LOOP OUT

0

1

2

3

4

5

6

7

8

9

4. How to Connect Cables

• Do not connect/disconnect cables while MLCD or other external equipments are turned on.

• First turn off the power all the attached equipment and make connections.

4.1. Single Image Processor Connection (for One 2X2 MLCD formation)

• Connect the RS-232C IN port of the Image Processor to the Com port of the PC with RS-232C
cable.

• Use MSCS (Multi-Screen Control System) program to turn on or off the display and control the
screen.

• To control the display, the ID on the Image Processor and the ID in the MSCS must be identical.

• In case there is no Com port, it is necessary to use the converting gender from USB to
RS-232C. There can be some malfunctions based on the gender makers.

• The IDs for each Receiver Module must not be overlapped. It should be set from 1 to 4.

• The ID for Image Processor must be set as 1.

• The IDs for Image Processor and Receiver should be set after turning off the power.

PC

Receiver Module (Lower Deck)

Image Processor Module (Rear)

Power Module (Rear)

PC (MSCS) to control MLCD

RS-232C (Maximum 15m)

DVI connection
(Maximum 5m)

※

If you need longer connection, please use
DVI boosters or DVI fiber-optic cable.

※

Select only one cable
connection for the control signal
between RS-232C cable and
LAN cable.

※

Make sure there is at least 4.4cm (1U) clearance between Image Processor Module and Power Module.

HUB or Router (Wireless & Cable)

LAN Cable

(Direct Cable)

LAN Cable

(Cross Cable)

0

1

2

3

4

5

6

7

8

9

ID : 1

0

1

2

3

4

5

6

7

8

9

ID : 2

0

1

2

3

4

5

6

7

8

9

ID : 3

0

1

2

3

4

5

6

7

8

9

ID : 4

- 20 - - 21 -

ORION

Hybrid Video System

4.2. Multi Image Processor Connection (for two or more 2X2 MLCD formation)

• This instruction is for multi Image processor connection (More than 2 Image processors)

• Configure the ID in the front side of the Image Processor to connect more than 2 Image
processors.

• Configure the IDs for Image Processor and Receiver after turning off the power.

• RS-232 signal must be used for the control signal connection between Image Processors.

• Only the first Image Processor, which is connected to the LAN port, can be controlled via LAN.

BLU1 BLU2 PWR VIDEO COMM ID

RECEIVER
MODULE

POWER

OFF ON

PWR

LAN

P-CON

232IN

232OUT COMM4 VIDEO4 COMM3 VIDEO3 COMM2 VIDEO2 COMM1 VIDEO1

DVI IN4 DVI IN3 DVI IN2 DVI IN1 LOOP IN LOOP OUT

0

1

2

3

4

5

6

7

8

9

BLU1 BLU2 PWR VIDEO COMM ID

RECEIVER
MODULE

POWER

OFF ON

PWR

LAN

P-CON

232IN

232OUT COMM4 VIDEO4 COMM3 VIDEO3 COMM2 VIDEO2 COMM1 VIDEO1

DVI IN4 DVI IN3 DVI IN2 DVI IN1 LOOP IN LOOP OUT

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

PC

Receiver Module
(Lower Deck)

Receiver Module
(Lower Deck)

Image Processor Module (Rear) Image Processor Module (Rear)

Power Module (Rear) Power Module (Rear)

RS-232C (Maximum 15m)

DVI connection
(Maximum 5m)

※

If you need longer connection, please use
DVI boosters or DVI fiber-optic cable.

PC (MSCS) to control MLCD

HUB or Router (Wireless & Cable)

LAN Cable

(Direct Cable)

LAN Cable

(Cross Cable)

- 22 - - 23 -

ORION

Hybrid Video System

5. Setting and operation of MSCS software

5.1. MSCS Installation

• Insert the Installation CD.

• You can see following installation start screen.

• Select proper version for your product and start installation

• MSCS supports Windows® 2000, Windows® XP and Windows® Vista, Windows® 7™ only

MSCS Installation start screen.

Caution for using MSCS

1. Data for Picture control, Manual Tracking and so forth can be read by clicking the
right button of your mouse on the desired MLCD set from MSCS.
Please do not use above function together with the other functions.

2. When you off AC power, execute power off by MSCS first and disconnect AC power
to save your configuration.

Caution

※ MSCS Versions can be changed for function improvement without prior notice.

5.2. Start MSCS

• MSCS is an application program needed to control MLCD.

• When you execute MSCS (v X.X) for your product at the installation screen, it will create a new folder
at C:/Program File/MSCS (vX.X) and an icon on your computer screen.

• By double clicking the MSCS (v X.X) icon, the initial screen image of MSCS (v X.X) will be displayed as
shown in the picture.

Main Image of MSCS (Multi Screen Control system)

①

②

③

④

⑤

⑥

⑦

⑧ ⑨

①.

Menu Bar

②.

Image Processor, Add/Remove button

③.

Screen Configuration Window : Window for configuration and checking the operating
conditions.

④.

Tree View Window : Show the Image Processor System.

⑤.

DVI Loop Out Status and Configuration Window: Configure the input channel of
Loop Out in the Image Processor or display the operating status.

⑥.

Command Mode Window

⑦.

Power Mode Window : Turn On/Off the display

⑧.

Play : All the connected screens display 1:1 screen play from input channel.

⑨.

INFO : Display the input information of the selected screen.