How it Works
Orion
Loading...
OBM-056-TBBSV

Orion OBM-050-TBBSV, OBM-070-TBBSV, OBM-097-TSBSV, OBM-185-TSBSV, OBM-215-TSBSV Operating Instructions Manual

...
OBM-070-TBBSV
OBM-097-TSBSV
OBM-185-TSBSV
OBM-215-TSBSV
OBM-240-TSBSV
OBM-056-TBBSV
OBM-050-TBBSV
Monitor Operation Manual V1.1
3G
Operating Instructions
Broadcasting Monitor User guide
24 24 24 24 24
524
24 10 11 25
25
25
25
25
25 12 25 13 25
25 14 25 15
26 16 26
26 17 26
26 18 26
26
27
27
27 20 27 20 27 20 27 20 27 20
21 21 22 22 28
23 29 23 23 31
Contents
A/V Scope Menu
Contents
Scope Position
Caution
Scope Mode
Product features
Line Number WaveForm Enable
Connecting to BNC Signal Device
Gamma Curve SDI input signal Format Bklight Dimming SDI output signal Format Volume Lock
Connecting to HDMI Signal Device
Power Saving HDMI input signal Format
Language
Osd Blend
Load sys Default
Background Gray
Gamma
Viewing the Control Panel
WaveForm Source Monitor Info Vector Enable
Basic Information
Audio Level Meter Initial Setup
Setting Menu
Display information
Composite input signal Format Source Alias
RJ-45 Remote Control
UMD
Function Key
Function key 1~12
Connecting to Component Signal Device
SDI Output Component input signal Format Timecode
Connecting to Composite Signal Device
Timecode Type
Temperature Ctrl HDMI output signal Format
Advanced Menu Connecting to VGA Signal Device
HDMI Output VGA input signal Format HDMI CSC
NTSC Setup
Aspect Menu
Scan Aspect Anamorphic
Accessory
Color Temp Marker Property Color Only Safety to Wide DSUB Safety to Marker
Marker
Marker Type
Video
Safety Area Mode Center Marker
Speaker Out
Connection Block map
Volume
Zoom Mode Accessory
Sound Menu Specifications
SDI Audio Specifications
Other Information
Getting Started
Connections
MENU Features
2
■
■
■
WARNING – TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR MOISTURE.
■
"IMPORTANT SAFETY INSTRUCTIONS"
□
Read these instructions
□
Keep these instructions
□
Heed all warnings
□
Follow all instructions
□
Do not use this apparatus near water
□
Clean only with a dry cloth
□
Do not block any of the ventilation openings. Install in accordance with he manufacturer's instructions
□
□
□
□
Only use the attachments/accessories specified by the manufacturer.
□
□ Unplug this apparatus during lightning storms or when unused for long periods of time
□
□
□
Shall be connected to a MAINS socket outlet with a protective earthing Connection
□ the disconnect device shall remain readily operable
□ The socket-outlet shall be installed near the equipment and shall be easily accessible
Caution
It is highly recommended to read and understand the cautions listed below thoroughly before you start using the product. And if you are unclear with any parts of the cautions or have questions, please contact us.
Getting Started
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose o f the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus
Caution
■
■
Explanation of Safety Related Symbols
Manual contents are subject to change without notice
4
■
1 2 3 4 5 6 7 8 9 10
●
Complete
○
-
16ch
16Channel, De-Embedded Audio Selected Out.
1:1 Pixel
1:1 pixel mode displays the original i mage resolution without scaling to matc h a certain resolution or an aspect ratio.
H/V Dela
y
View the blanking area and syncronize signals by di splaying the horizontal and vertical intervals in the c ent er of the screen.
01 Getting Started
Product features
W
aveform
Displays the lume (Y" ) and Chroma (Cb/Cr) components of the input video si gnal as a form of waves.
Vectorscope
Displays an X-Y plot of two signal, which can receal details about the relationship between two signals.
ZOOM Select extension where you want to zoom(left or right).
Jog Dial Switch
Select an image of input signal & control on/off & switch to full screen.
Converter Solution Monitor Displa
y
SDI to HDMI SDI_A SDI_B
Tally Lamp
Red, Green Support & UMD Tally Support
Marker4:3, 14:9, 15:9 and 16:9 area, line, safety, center markers display
UMD This monitor supports UMD
(Under Monitor Display)
function which displays Ancillary data at the bottom of the screen.
Screen Color Mode
Blue, Red, Green and Mono
Programable Function ke
y
Source Alias Text Edit
IPS LCD Panel
Wide view Angle
Maximum Brightness RJ-45 Remote Control
●●●
HDMI to SDI SDI_B
●●●●●
HDMI YPBPR DSUB CVBS
SDI to SDI
SDI
Output Source
SDI_A
●●●
--
YPBPR to HDMI DSUB
○○
--
○○
YPBPR to SDI YPBPR
○○
-
○
●
HDMI to HDMI HDMI
●●●
--
●
HDMI YPBPR DSUB CVBS
HDMI
Output Source
SDI_A
●●●●
○○
CVBS to HDMI
▶ HDMI and DSUB VIDEO MODE ONLY
DSUB to SDI
Monitor Displa
y
DSUB to HDMI SDI_A SDI_B
CVBS to SDI CVBS
○○○
-
●
YPBPR
○○
-
○
--
HDMI
●●●
--
●●
SDI_B
●●●●●●
●
Display
●●●●●
○○
Not support
CVBS
○○○
-
○○
ing
DSUB
○○
--
Product Factures
■
Getting Started
monitor info
OBM-056-XXXX
X
monitor
160.4 x 113.9 (mm)
Stand
160.4 x 113.9 (mm)
Front
Rear
1. Sun Hood
2. V mount
4. Speaker
5. Mount pem
6. On/Off switch
7. HDMI out
8. HDMI in
9. Component, site i n
10. Mount pem
11. SDI Out
12. SDI in
13. DC 12V in
3. Service port
1. Mai n m enu open
2. Source select
3. Mai n m enu open
4. Mount pem
5. Functi on key F1
6. Functi on key F2
7. Menu control Jog
12. Tally display
8. Speaker
9. Mount pem
10. Audio in
11. Audio out
Viewing the Control Panel
6
■
221.5 x 126 (mm)
Stand
221.5 x 136 (mm)
Front
01 Getting Started
monitor info
OBM-070-XXXX
X
monitor
Rear
1. Mount pem
2. Tally display
3. Speaker
5. Function key F1
7. Function key F2
9. Function key F3
11. Function key F4
13. Function key F5
15. Function key F6
4. Source select
6. Rato scan choice
8. Main menu open
10. EXIT
12. UP
14. DOWN
15. Menu control Jog
14. Power LED
13. V mount
14. RS-485 IN
15. RS-485 OUT
16. DC 12V Power in
17. XLR Power in
18. On/Off switch
2. SDI signal in
4. SDI signal out
6. Composite out
8. Audio in R
10. PC Audio out
12. HDMI out
1. Component [ Pr ], CVBS 3 in
7. Audio in L
9. PC Audio in
11. HDMI in
3. Component [ Pb ], CVBS 2 in
5. Component [ Y ], CVBS 1 in
Viewing the Control Panel
■
Getting Started
monitor info
OBM-097-XXXX
X
monitor
221.5 x 218.5 (mm)
Stand
221.5 x 230.5 (mm)
Front
Rear
14. DOWN
15. FunctionF4
16. Function F5
17. Function F6
18. Menu control JOG
19. IR Sensor
20. On/Off switch
10. Source select
11. Main menu open
12. EXIT
13. UP
9. Speaker out
5. Function F1
6. FunctionF2
7. Function F3
8. Power LED
1. Brigth control
2. Contrast cont rol
3. Chroma control
4. Volume control
14. Composite out
15. CVBS IN 1, Component [ Y ]
16. CVBS IN 2, Component[ Pb ]
17. CVBS IN 3, Component [ Pr ]
10. HDMI in
11. VGA in
12. Audio out
13. Audio in R
7. XLR Power in
8. RS-485 out
9. HDMI out
4. SDIin A
5. SDI in B
6. SDIout
2. Audio in
3. Audio in L
1. RS-485 IN
Viewing the Control Panel
8
■
01 Getting Started
monitor info
OBM-185-XXXX
X
monitor
443 x 308 (mm)
Stand
443 x 318 (mm)
Front
Rear
14. Composite out
15. CVBS IN 1, Component [ Y ]
16. CVBS IN 2, Component[ Pb ]
17. CVBS IN 3, Component [ Pr ]
10. HDMI in
11. VGA in
12. Audio out
13. Audio in R
7. XLR Power in
8. RS-485 out
9. HDMI out
4. SDIin A
5. SDI in B
6. SDIout
2. Audio in
3. Audio in L
1. RS-485 IN
16. Down
18. FunctionFA6
19. Function FA7
20. Function FA8
21. Menu control JOG
22. IR Sensor
23. On/Off switch
17. Function FA5
14. Source
15. Scan
13. Speaker out
12. Power LED
1. Brigth control
2. Contrast cont rol
3. Chroma control
4. Volume control
7. UP
9. FunctionFA2
10. Function FA3
11. Function FA4
8. Function FA1
5. MENU
6. EXIT
24. Speaker out
Viewing the Control Panel
■
Getting Started
monitor info
OBM-240-XXXX
X
monitor
563 x 410 (mm)
Stand
563 x 420 (mm)
Front
Rear
14. Composite out
15. CVBS IN 1, Component [ Y ]
16. CVBS IN 2, Component[ Pb ]
17. CVBS IN 3, Component [ Pr ]
10. HDMI in
11. VGA in
12. Audio out
13. Audio in R
7. XLR Power in
8. RS-485 out
9. HDMI out
4. SDIin A
5. SDI in B
6. SDIout
2. Audio in
3. Audio in L
1. RS-485 IN
18. AC JACK
19. AC On/Off
20. Down
22. FunctionFA6
23. Function FA7
24. Function FA8
29. Menu control JOG
30. IR Sensor
31. On/Off switch
21. Function FA5
18. Source
19. Scan
17. Speaker out
16. Power LED
1. Brigth control
2. Contrast cont rol
3. Chroma control
4. Volume control
7. UP
9. FunctionFA2
10. Function FA3
11. Function FA4
8. Function FA1
5. MENU
6. EXIT
32. Speaker out
26. FunctionFB6
27. Function FB7
28. Function FB8
25. Function FB5
13. FunctionFB2
14. Function FB3
15. Function FB4
12. Function FB1
Viewing the Control Panel
10
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use