The monitor don’t work by connection with correct power supply, switch don’t work, power
light don’t work and the screen don't work.
YES NO
UL101 is 1.8V? U102 is 3.3V?
NO
NO
YES
YES
voltage on X1 correct
NO
NO
YES
YES
(39SF020) is correct or not
NO
YES
chipset
Firstly check the built-
+12V/+V5 whether is working correctly.
Built-in adapter don’
breaking or not, C02 is 300V or not
U101.U102
concerning circuit
39SF020
not, filter is short-circuit or not
Q2 broken or not, check IC01
D02(1N418)=>Q1,Q2=>IC02.
Whether there is shortD05.08, T02 broken or not
(1K resistance), D03 18V manostat diode
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
2. NO PICTURE
s on and it work when signal input,
light work when power switch on or off, then the A/D board work
correctly. Problem is from the controlling voltage on circuit or
6V by
Circuit is ok, check the 12V power supply on
inverter board whether is correctly, check
Check whether there is 3.27V on the
GM5221 chipset
Check R412 broken or not, Q401 broken or
The screen don’t work, power light work correctly
YES NO
Check whether there is 3.0
connecting Q1 to the 13 feet on MP1048
NO NO
YES YES
F1=>Q5=>Q4=>U1 broken or not
Firstly confirm the power light i
circuit on inverter board, check A401 whether is lower voltage.
88 feet of GM5221, whether is ok
Check
Q1=>Q4=>R2=>R12=
>R5 broken or not
not, R413 whether there is +5V supply
defectived
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
3. White screen or white screen after switch off
Check U703 input L702
ived or concerning
Check Q701 and GM5221 (feet
Check U703 power supply and circuit
Check U703 input voltage is 5V or
Gm5221 defectived and R412 resistance
If voltage out is correctly, check
(CN701) the pin4,6,8 on the
connector from panel to A/D
Voltage is too lower or no output then
out or the plug is
from panel to
CN701 is broken,
The screen is white color, can not display picture. White after switch off: switch on or off are
correctly working and can display picture correctly, but after switch off or no signal input, the
screen turn to white screen.
White screen:
YES NO
voltage is 5V or not
YES NO
77), the voltage is correctly or not
YES NO
not
YES NO
board, the voltage is correct or not
YES NO
LCD panel burntloose or the connection (
A/D board) is not good
Check F101 whether is +5V voltage
F101 defect
circuit/component defectived
broken or not
defectived or not
the U703 defectived
The circuit on U703L701 defectived
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
The problem is on the circuit between the feet 88 of GM5221 to the feet 12 of
circuit R412 and Q401 whether
Check the changing of the switch
on/off voltage is correctly or not
Check the # 88 feet on
GM5221, whether it is work
Circuit on inverter
Check the concerning circuit
White screen after switch off:
MP1048, check the voltage between the switch on/off
is work correct
YES NO
3.06V-0V ( feet 13 on MP1048)
YES YES
board is defectived
NO NO
O1, O401,R2,R5 are broken or not
correctly when switch on or off
on R412, O401, O1
GM5221 defectived
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
No picture
Check the feet 3 on TV tuner,
Check L903,
or
not, power supply on
TVP5147 is normal or
Check L903 broken or not,
Q901,R923, 926,904 is
out
No picture
No sound
Check OSD audio setting.
Change to PC mode for
check audio is normally
oblem on the public
part of the audio circuit
Check the voltage
on feet 1 on TV
Check R908,R603
broken or not,
C904,C603 broken or
out or not,
Can not sort
snow
. Voltage on the feet
2 and 12 on TV tuner is
Replace U901
Check the voltage
on L902, L901 and
concerning circuit
is 5V or not ( 5V is
4 TV mode: NO PICTURE or CAN NOT SORT CHANNEL
whether is 1.08V voltage
YES
NO YES
whether is 0.86V
NO
YES NO
YES
Check C501 broken
YES
not, replace TVP5147
NO
normal? C913,C915 burnt-
NO
or not?
Sound is ok
Replace U901
or not
Pr
not, burntcreep or not
Replace TV tuner
tuner is 2.37V
channel
there is shinning “
point”
5V or not
TV tuner
correct)
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
5. Sound is not good ( no sound, signal sound channel, no audio to earphone)
No sound
Check TPA1517 (feet 7, 8)
PT2314 defectuved or
.6)
Problem on power supply
circuit or R630, TPA1517
C614.615 defectived or
speaker defectived or plug is
TPA1517 defectived or the feet
3 on TPA1517 controlled by
No sound to earphone
with earphone and test
whether the voltage of TPA1517
NE5532 (feet 8) is
ot, feet 3 AND feet
g is
good situation. Taking off earphone,
if no sound, then check the comment
circuit. If sound,
whether there is voltage
. The TPA1517
NE5532 (feet 1 and
6) input voltage is 2.37V or
circuit is broken or
not, R626(20k),NE5532
NE5532 output voltage is 2.37V or not,
Check PT2314 output voltage is 4.36V
YES
voltage is 12V and 11.2V
NO NO
YES
Check TPA1517 (feet 4
output voltage is 5.36
NO YES
YES
not connected correctly
YES
NO
NO
other circuit
R623,D601 defectived
defectived
Connecting
(feet 3) change from 5.45V to 0V
YES
Check
5V or n
6 ARE 2.38V or not
Check whether the earphone plu
part of the audio
then check
variation TPA1517
defectived
Check
not
Check
broken or not
Check
check C631.632 and NE5532 broken or not
C628,C629,NE5532 broken or not
NO
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
6. Built-in adapter defective
No voltage output => check C02 (450V,
out
out, F1 is defectived
NTC/TOA is defective or not or
D05 (IN4148) defective or not, D01,
out or not,
out or not.
IC01(1203D6)R08(1K)D03(18V) defective or not.
out, all these component
above component are not problem,
If replace the
out again, then
(27V),
the resistance on
Q1 or Q2,Q3 or the
C05 (47UF/50V),
C04(100UF/50) defective or not,
C05(47uf/50v),
IC02(NEC2501), IC03(ka431)
YES NO
Check IC01.1203D6 burntor not
YES YES
NO
NO
YES NO
YES NO
YES NO
Replace IC01
(FR157) burntD06.D08(MBR20100) burnt-out or not
Replace D07
D05(IN4148),D01(FR157) etc.
Replace
component around them
Replace
c04(100uf/50v), or transformer
100UF) whether have 300V voltage
Whether the C02 burnor not,
short-circuit. DOA/KBL406 burnt-out or not
Check Q02(K2645) burnt-
(usually, if the C02 burntwill also burnt-out)
All
then the F1 burnt-out.
new one and burntreplace the C11,C22
Check Q1,Q2,Q3 and
their around circuit defective or not
Check
T02 transformer defective or not
Check
defective or not
PDF 文件使用 "FinePrint pdfFactory Pro" 试用版本创建www.fineprint.com.cn
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.