Orion 52177 User Manual

INSTRUCTION MANUAL

Orion® MicroXplore™

Digital Handheld Microscope

1.3 MegaPixel, Illuminated,

40x and 200x magnification

# 52 177

Providing Exceptional Consumer Optical Products Since 1975

OrionTelescopes.com

Customer Support [phone]

E-mail: [e-mail]

Corporate Offices [phone]

89 Hangar Way, Watsonville, CA 95076

© 2011 Orion Telescopes & Binoculars

IN 409 Rev. A 01/11

Welcome to a new world of adventure. Your new Orion® MicroXplore™ Digital
Handheld microscope is capable of capturing detailed, high resolution, full­color images and movies of microscopic worlds awaiting your discovery.

Examine specimen objects at high and low powers of 40X and 200X.

With 8 LED illumination and dual magnification a wide variety of specimen
objects such as slides, coins, stamps, rocks, relics, insects, plants, gems,
circuit boards and much more can easily be studied and digitally captured.

Easy to use rubber focus wheel provides a precise one-handed focusing
mechanism.

Please read this instruction manual before attempting to use the microscope
or install the needed software.

Typical applications

• Education and Scientific Research

• Coin and Stamp Collectors

• Electronic, Printing, Textiles and other industry inspection

• Medical Examining

• Law Enforcement & Security

• Beauty Treatment and Skin Care

Parts List

• Digital Handheld Microscope with
built In USB cable

• CD-ROM (XP, Vista, Windows 7)

System
Requirements

Operating System

Windows XP, Vista and Windows 7

Computer

A computer is required for normal use of
the microscope.

Future WinJoe software requires
Windows XP, Vista or 7.

The following hardware is required:

• Processor – Pentium III™ or
equivalent, or higher

• Recommended minimum memory
size is 256 MB.

• Disk Space – 100 MB minimum,
500 MB or more recommended
for saving images.

• Video Display – 800 X 600, 16-bit
color or higher. 1024x768 or
higher is recommended.

• Mouse (external or built-in)

• High Speed USB 2.0 port

Figure 1. The Orion MicroXplore

Digital Handheld Microscope.

Figure 2. The launcher provides an

easy menu for software installation.

Software Installation

Before the microscope can be used, Future WinJoe image capture software
must be installed onto your computer. Turn on your computer and allow the
Windows operating system to load as normal. Insert the included CD-ROM
into your computer’s CD-ROM drive, and the Launcher will appear (Figure 2).
This allows you to install the Future WinJoe image capture software.

2 3

Capture Software Installation

1. Insert the CD-ROM into the drive.
The Launcher will appear. If you are
using Windows Vista, the AutoPlay
window will appear first. Select

Run autorun.exe.

2. Click Install Future WinJoe.

3. The Software Installation will start.

4. Select language and follow the on
screen instructions.

5. When installation is complete click
the Finish button.

Figure 3. The live video window.

Microscope Operation

To obtain first images with the microscope, follow these step-by-step
instructions:

1. Plug the microscope into your computer’s USB port. Windows will auto­matically install the microscope camera driver the first time the device is
plugged in.

2. Double click the Future WinJoe icon now installed on your computer’s
desktop.

3.

4. Notice the white LED lights shining through the bottom of the microscope;

Click the connect camera icon on the Future WinJoe toolbar. The
software will automatically connect directly to your microscope with

a Live Video Window. (Figure 3)

these LED lights indicate that the microscope is connected and receiving
power from the computer.

5. Place microscope directly over
specimen. Turn rubber focus wheel
to achieve focus. Turn clockwise
for low magnification. Turn counter­clockwise for high magnification.

6. You may need to adjust the exposure
(Figure 7) and/or brightness control
of the camera before attempting to
focus. (Figure 6).

7. View the Live Video Window on the
computer screen and adjust the
rubber focus wheel accordingly to
determine best image focus.

8.

9.

10.

You have now taken your first imag­es with the Orion MicroXplore Digital
Handheld microscope!

Select the Capture Image Icon

on the Future WinJoe toolbar
to take a single image in JPG/BMP/
PNG format as set in Capture set­tings (Figure 5).

Select the Burst Icon on the

Future WinJoe toolbar to take
a number of consecutive images as
set in Capture Settings (Figure 5).

Select the Capture Video Icon

on the Future WinJoe toolbar
to take a movie in WMV format.

Camera Options

Figure 5. Changing resolution.

Figure 6. Adjusting brightness.

100 Dollar Bill 40X 100 Dollar Bill 200X

Figure 4. Dual 40X and 200 X magnifications.

4 5

For best images, you can adjust the
camera settings to fine tune the image.
You can see how the camera controls affect an image in the Live Video
Window.

Capture Settings

Select the capture settings icon on the Future WinJoe toolbar. Record
and Preview resolutions, frames per second, video quality and Image

output formats can be adjusted. (Figure 5).

The destination file directory can also be changed from the default in Capture
settings.

Figure 7. Adjusting exposure.

Camera Settings

Select the Camera Settings Icon on the Future WinJoe toolbar. Brightness,

Contrast, Saturation, Sharpness, Gamma and White Balance can be
adjusted. (Figure 6). To return the camera settings to their default settings,
click the Default button.

Select the Camera Control tab to modify exposure times using exposure slider.
(Figure 7). To return the exposure to its default settings, click the Default button.

Try several different settings to get a feel of how the camera controls work
and affect the resultant image on the computer screen. The Brightness and
Exposure controls are the ones you will use the most.

The magnification, lighting conditions, and object being imaged will dictate
how these camera controls should be set. Usually Exposure will be set first
(higher magnification usually requires more exposure), and then Brightness is
adjusted as needed.

Tips

Loss of Camera Connection

If the computer connection to the camera is interrupted, you will need to
re-establish connection. This can happen due to several reasons; if a cable
becomes unplugged, the computer “freezes”, or the software/hardware other­wise temporarily loses the data coming from the camera.

To re-establish camera connection, first close the Future WinJoe program on
your computer. Then, unplug and re-plug the camera into the computer’s USB
port. Now, open Future WinJoe, click the connect camera icon and the Live
Video Window should appear indicating re-established connection between
camera and computer.

Figure 8. Measuring specimens using on screen reticule.

On Screen Reticule

The on screen reticule can be switched on and off by clicking on the
reticule icon.

By calibrating the units of reticule against a ruler, target specimens can then be
visually measured against this reticule for precise measurement.

Specifications

Sensor 1/4" CMOS

Number of pixels 1280 x 1024 pixel layout; 1.3 megapixel resolution

USB Port USB 2.0

Video frame rate up to 16 frames/second @ 1280 x 1024

Preview Mode 1280 x 1024, 640 x 480, 320 x 240

Magnification 40x; 200x

Sensitivity 1.0V/lux-sec@550nm

Spectrum Response 400nm – 1000nm

Shutter Type ERS (Electronic Rolling Shutter)

White Balance Auto

USB Cable length 1.5 M

Operating System XP, Vista, Windows7

6 7

One-Year Limited Warranty

This Orion MicroXplore Digital Handheld Microscope is warranted against defects in materi­als or workmanship for a period of one year from the date of purchase. This warranty is for
the benefit of the original retail purchaser only. During this warranty period Orion Telescopes
& Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to
be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way,
Watsonville, CA 95076. If the product is not registered, proof of purchase (such as a copy of
the original invoice) is required.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mis­handled, or modified, nor does it apply to normal wear and tear. This warranty gives you
specific legal rights, and you may also have other rights, which vary from state to state. For
further warranty service information, contact: Customer Service Department, Orion Telescopes
& Binoculars, 89 Hangar Way, Watsonville, CA 95076; [phone].

OrionTelescopes.com

89 Hangar Way, Watsonville, CA 95076

Customer Support Help Line [phone]

© 2011 Orion Telescopes & Binoculars